Question about Zanussi Dishwashers

1 Answer

My dishwasher works but is taking a long time to finish the cycle it is a zanussi DA 6373

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 166 Answers

Your dishwasher may pre-heat the water. If so, and if the water entering the dishwasher is cool, the heater may take up to half an hour to heat the water.

To avoid the wait, increase the incoming water temperature before turning on the dishwasher. Do that by running the kitchen sink faucet until the water runs hot. Or increase the temperature of the hot water to the entire house at the hot water heater.

Posted on Nov 12, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Cycle takes forever also not heating


On the side of the units there is a matrix (up and down tubes ) they need cleaning but I will warn you the pipes from the drain and through the matrix are gummed up with a disgusting sludge. There are some push on fittings and some held with spring clips take some photos when disassembling but it is easy just time consuming trying to flush the gunk

Sep 19, 2014 | Zanussi 24 in. DE6744S Free-standing...

1 Answer

Zanussi diswasher ZDI6053N does not finish its cycle.It has to be turned off manually


Your dishwasher is a sophisticated device that registered most failures. The End of cycle LED flashes if there are alarms memorized. So, count how many times the End of cycle LED flashes.
For example:
One flash - i10, the problem with water intake
Two flashes - i20, a problem wit drain water
Three flashes - i30, activated anti-flooding device
..... and so on

Dado

25045382-uoa451p4gvi3zxbh3f0exyx1-2-0.jpg

Sep 01, 2014 | Zanussi Dishwashers

1 Answer

Zanussi dishwasher beeps once and end of cycle light flashes


Most likely your dishwasher finds fault.

Appliances without a display will show the alarms by a number of flashes of the LED "end of cycle".

For example: one flash = i10, two flashes = i20
..........and so on

So, count how many times LED "end of cycle" flashes and you will know the error code.

Dado

Aug 24, 2014 | Zanussi Dishwashers

1 Answer

I have Zanussi DX6453 dishwasher. Suddenly it is not drying our dishes. All programs working. Do you think is problem with Element or Thermostat. It is heating water.


sugget the water temperature, it relies on the temperature of the water to heat to items up so that when the wash cycle has finished the heat will dry them. Hope this is useful. Regards Mike

Jul 07, 2011 | Zanussi Dishwashers

1 Answer

Tablets not dissolving


Sounds like whatever soap you are using is just too much soap your dishwsher can handle. The soap "packs" are usulally an overload of soap for most dishwashers. Just a few teaspoons of regular name brand soap sometimes will cure lots of dishwsher ills!!!

Apr 12, 2008 | Zanussi 18 in. DA4342 Free-standing...

1 Answer

Zanussi dishwasher DA 6141 6 years old


Check first the filters on the inlet water line (both sides). Then, if problem still exist - check that the inlet water valve works(it is an electromagnet valve, located at the pipe's entrance to the machine)). If it doesn't work, test that it get power. In case it get power and doesn't work - You can easily open the valve and clean it (from scale or other dirt). Be aware you should disconnect the power cable from machine before doing it !!!! Check as well for valve's coil resistance. In case you have no resistance measurement - you should replace it for a new one. Good luck

Sep 02, 2007 | Zanussi 24 in. DA6141 Built-in Dishwasher

1 Answer

Dishwasher was tipped and won't run


I have the same problem if you take off the tray below the front door and set a small blow heater in there it will dry the out the anti flood switch. It usally takes about 25 mins for the machine to start working again.

Feb 21, 2007 | Zanussi 24 in. DE6850 Free-standing...

1 Answer

Still too long for a cycle


how long does cycle take? if program actually finishes there is unlikely to be a problem. factors which can affect cycle times are inlet water temp and rate water is entering the machine

Aug 15, 2006 | Zanussi 24 in. DE6744 Free-Standing...

Not finding what you are looking for?
Dishwashers Logo

Related Topics:

125 people viewed this question

Ask a Question

Usually answered in minutes!

Top Zanussi Dishwashers Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Mike Cairns
Mike Cairns

Level 3 Expert

3053 Answers

Owen Barnes

Level 3 Expert

835 Answers

Are you a Zanussi Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...