Question about Sharp SF 2020 Copier

1 Answer

LightBulb in SF 2025 not working

I have a Sharp SF 2025 and I changed the lightbulb thinking it was out and when I did it still does not come on for the copying. Is this a componet that can be replaced or is it fuseable and can be replaced?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Yes, replace exp. termal fuse,
esr

Posted on Nov 28, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

No fonctions


  • F2 with sub code 00 - Toner Sensor problem, ID pattern reading error;
  • F2 with sub code 02 - Toner Motor problem, check toner dispenser motor;
  • F2 with sub code 31 - Image Density error, Check the light level or the drum surface reflectivity;
  • F2 with sub code 32 - Drum Mark sensor, missing/dislocated mark or sensor faulty. Sensor cannot scan mark properly;
  • F2 with sub code 33 - grid voltage wrong, either too high or too low;
  • F2 with sub code 35 - grid voltage correction will not work during simulation;
  • F2 with sub code 37 - drum mark sensor adjustment required.

Feb 24, 2014 | Sharp SF-2025/2030 Copier Toner Black...

1 Answer

How to check the meter


just push the 0 key or cancel key, just try you can read the counter

Jun 24, 2013 | Sharp SF-2025/2030 Copier Toner Black...

1 Answer

I have sharp sf-2025 keys number from 1 to 9 wont work.. pls help..


Hallow , keys are like electronic switches which wear with time may be due to dirt inside or normal expiry. They need to cleaned or replaced with similar ones. Open the control panel and unscrew the keyboard. You will identify them by their indication with a ' k' for example key 6 is written 6k. You can use WD-40 solvent cleaner if it doesn't work, then use a solder iron to remove old ones and buy sample like on any electronic shop and replace. Happy new year.

Dec 30, 2010 | Sharp SF 2020 Copier

2 Answers

Sharp copier SF-2025 displays an error code U%.


Hello sir; It can be reset by power on and open the front door, press and hold exposure key while you closing front door.

Sep 29, 2009 | Sharp SF 2020 Copier

1 Answer

HOW DO I ADD OR CHANGE TONER TO A SHARP COPIER MODEL SF 2025


Open the front lid an извдеките block прояленя. Open the lid of the block of the manifestation and get up the pencil case with toner, push film on itself and tear away it...
take away its empty. Close the lid of the block of the manifestation and install it in device. Close front cover. All

Sep 14, 2009 | Sharp Printers & Copiers

1 Answer

AE Code on Sharp SF2025, What means?


exposure lamp or exposure fuse

Jun 08, 2009 | Sharp SF 2020 Copier

1 Answer

Sharp Copier 2025 error steady CH


I believe that that error code relates to the dorter. Make sure it is seated correctly against the copier.

Jul 24, 2008 | Sharp SF 2020 Copier

1 Answer

Sharp 2025


You have to take out the toner/developer box. Unscrew the top portion(usually blue screws), then separate the two. Dump out the old developer and vacuum out the remainder. OPen the DV bag and slowly poor the dv into the unit evenly. then rotate the DV cylinder with e screw driver at the rear to blend it onto the dv roller. close the unit and reinsert to copier. There is service mode to run the toner into the new developer. You can contact me to find this out.

Jun 12, 2008 | Sharp SF 2020 Copier

Not finding what you are looking for?
Printers & Copiers Logo

Related Topics:

115 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sharp Printers & Copiers Experts

George Mclaughlin

Level 2 Expert

330 Answers

Soulvisitor
Soulvisitor

Level 3 Expert

1113 Answers

Vito Suglio

Level 1 Expert

23 Answers

Are you a Sharp Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...