An expert who has achieved level 2 by getting 100 points
An expert that got 5 achievements.
An expert who has written 50 answers of more than 400 characters.
An expert whose answer got voted for 20 times.
Re: Newair ADS-300 Dehumidifier
may be full. Your dehumidifier has a safety device that turns off the
dehumidifier when the water tank is full. Usually the tank itself
either presses against a switch or there's a device connected to the
tank that triggers a switch when the tank is in place and full.
you've emptied the tank and the unit doesn't run, inspect the place
where the tank rests to see if there's a switch or mechanism that's not
being activated. You may be able to turn it on with a simple flick of
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
An automatic overflow switch and Container “Full” indicator light are provided to turn the dehumidifier off before the container overflows. When the indicator light on the control panel glows, the water container must be emptied. If the light remains on and the dehumidifier does not begin to operate make sure the float is attached to the water container.
When the condensate water container is full, the indicator lights up. 1. Turn the power off before removing container. Wait 3 minutes for any remaining water to drain into the condensate container. 2. Tilt the container forward then lift carefully by the handle. 3. Empty and gently re-insert the container. Important:This water is not suitable for drinking.