Re: kodak easyshare5300 printer won't print using word...
You should be able to use any Word Perfect program and print with it. It is a third party program to Kodak so it would be supported by Word Perfect. We have tested their software with our printer drivers and Home Center features and, as far as I know it all works fine. Have no fear of trying it.
I would consider checking with the software makers involved to learn more about any additional information they may have.
Talk to you soon.
the friendly Kodak guy
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Is your monitor calibrated? What paper are you using? Are you using icc profiles? where are you printing from? ie: photoshop, windows application, other software? could be a conflict betwwen program and print driver.
press the menu button on the printer and go to clean print head and do a basic clean........make sure you are using genuine Kodak ink cartridges as there are retailers selling refilled and look alike.........if you still have same issue then its a print head issue and call kodak tech support they will replace it for you without any charge....let me know if this was helpful.........
check first the type of paper that you are using if it is compatible in your printer if you are connected online, try first to update your firmware, you can do that by downloading it in kodak website www.kodak.com/go/drivers, the latest version is 71.650837, then install it in your computer. after the upgrade restart your printer, then try to calibrate then deep clean of your printhead then print demo page. if it still producing the same result or problem.
If your product is still within the warranty period from KOdak then you can call them up for some step by step troubleshooting to help you with your problem and as well they can replace the printer if defective.
Try this first
Calibrate your printer, then print a demo sheet.
If paper is in the photo paper tray, remove it.
Load photo paper into the photo tray.
Fan the paper to keep the sheets from sticking together.
IMPORTANT: Do not overload the photo tray.
Load a maximum of 20 sheets into the photo tray, with the Kodak logo facing up.
Engage the photo tray by pushing it in until it stops.
Calibrate your printer.
Select Calibrate Printer, then press Start.
Wait for your printer to print the calibration sheet.
Place the calibration sheet face down on the scanner glass.
For the 5300 AiO printer, place the sheet on the front right corner of the scanner glass.
For the 5500 AiO printer, place the sheet on the left rear corner of the scanner glass.
Wait until "Calibration complete. Remove calibration page from scanner glass. Press OK to continue." appears on the LCD display.
Remove the calibration sheet from the scanner glass, then press OK.
Print a demo sheet.
Disengage the photo tray by sliding it towards you until it stops. When the photo tray is disengaged, the main tray is active.
Select Print Demo Page, then press Start.
Wait for the demo sheet to print.
Then call them if issue Persist at these numbers:
In the U.S. and Canada: 1-800-421-6699
In Australia and New Zealand: 1800 793 895