I take some pictures and the camera works fine. But this morning when i switched the cam to take photos i see only a white screen with the aperture and speed numbers.
Read like have a bright light in front of the lens. I took some photos but just took a white screen. The LCD of the camera work fine but i see other photos that i take.
The day before this begin, i have take pictures without light, in the night.
Can anyone have solution or recomendation to this?
-   Same problem. Everything seems to work fine. Displays pictures already on card, able to change settings, etc. Just can't take a picture. All I get through the view finder and LCD screen is white screen with the number of pics available on card, the mode setting and the yellow focusing brackets. No warning, just happened. Almost seems like there is no optical input being received from the lens. Super CCD not so super?-   nsdan
Nov 21, 2007
-   I get a white screen, can even take pictures that turn out all white. Also there is a message that says IAE but I can't figure out what that means.
I have Fuji FinePix 2650 Digital camera with same problem. I can almost guarantee this is not a firmware problem. I went mountain biking a few months ago and take pictures. I take out camera and turn on. I get lines then white screen. I banged on camera and fixed it. Later a few weeks ago I turn it on and white screen. i beat this thing and get bad menu selection screen for a moment then white again. It takes pictures well and talk to computer no problem but no LCD picture. I thinking it is loose connection for LCD. Send it for repair or if you seek adventure try to fix it yourself!
Comments:
Nov 30, 2006
- Sorry, I posted to the wrong problem. If your LCD is showing any intelegable information at all -> it is not likely a malfunction in the LCD. It sounds like bad link between the image processor and the LCD circuit. On this problem I cannot offer any insight.