Hp desktop 1320 printer has yellow light on - it the icon symbol
We dont have a manuel here to check the symbol and the printer is not working....the yellow light is on and it is a box with the top line gone so two sides and bottom with dots shaped like a triangle in it. Is that the toner light or what is the problem please?
Re: hp desktop 1320 printer has yellow light on - it the...
I think you are talking about the 2nd light from top. It is a triangle with an exclamation mark in it. If its blinking it usually means there is some settings conflict or the printer is unable to pick up paper.
Power off and power on the printer. Make sure you have a Green light on Semi Circle button.
Press and release the Green button on the printer. A page should come out.
- If it does, you need to configure the settings on the PC.
- If it still blinks the Yellow light, then press and release the Green button again.
Let us know about your observations.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
There actually was a misfed sheet, hidden at the very bottom of the lower hinged back panel. The reason it was misfed was that this panel had somehow gone off one of its hinges. Ironically I did not discover the misfed sheet until I had taken the printer down from its shelf and turned it over to read the serial number to the extended warranty tech support guy.
Moral: Open every panel carefully, check for misalignment. These printers have flimsy plastic parts.
what about the ink levels...open the backdoor of the machine and check for any obstacle....disconnect all the cables..press and hold down the power button for 30 sec..reconnect all cables..try again...try connecting the machine directly to the walljack.