Question about Aastra Telecom Aastra MDC Centrex Telephone

Open Question

Changing ringer on Meridian (Nortel) M5316

Can anyone tell me how to change the ring tone on the above mentioned phone? All I have now is one long beep.

Posted by on

  • fishybusines Apr 02, 2009

    I would like to change the ring tone because the manual is missing. Can you help?

×

5 Suggested Answers

ynotphone
  • 192 Answers

SOURCE: T7316e Nortel Meridian Norstar Telephone MANUAL

Not too sure what type of manual you are looking for, but here is a useful link to have for a Norstar system information.

http://www.alphatelecom.ca/meridian_norstar_manuals.htm

Posted on Mar 25, 2009

  • 8 Answers

SOURCE: Ringer Help

Hi there, don't worry changing ring tone it's a very easy task. All you have to do is go to the main menu on your phone. From there you wanna go to settings, and you should see and option there to change the ringtone. In the other hand if your phone has sound files that can be used as a ring tone, then all you have to is go to the location of that file (it's usually located under "my stuff" "my music" etc) and select the file, from there you can select that file to assign as a ring tone. If you need further instructions you might want to put the make and model of your phone. Good luck!

Posted on Jan 19, 2008

  • 38 Answers

SOURCE: Do I need a network?

If that model phone has a rj14 jack ( standard phone jack) and when you plug it into a known good wall jack and you can draw dial tone then it will work. If not it requires a KSU to interface with the lines and that's a lot more equipment than you need for 1 or 2 lines. Thank you. Jer

Posted on Feb 17, 2008

consultel1
  • 856 Answers

SOURCE: Norstar Meridian M7100 incoming calls - no ringing tone

Programming is done on M7310, M7324 and T7316 sets.
To set up ringing you need to enter programming by pressing the feature key followed by **266344.When prompted to enter the password enter 266344.
The screen should say TERMINALS&SETS. The 4 top line/feature keys are now used for programming.
At the terminals&sets prompt, press the show key (top right arrow). The display should now ask for an extension number. Enter extension number you wish to program ringing on. Press the show key (top right arrow)
The display should sat LINE ACCESS
Press the show key (top right arrow) .
The display should say LINE ASSIGNMENT.
Press the show key (top right arrow) .
The display ask for a line number. press list
The display should say line 001: appear & ring
press the Chng key till it says appear only press next key (lower right arrow)
The display should say line 002: appear & ring
repeat the procedure the same as line 001 for the remaining ringing lines

press the release key when finished

Posted on Jan 12, 2010

  • 19 Answers

SOURCE: How do you turn the ringer back on a T7316E Nortel

MANY TIME A PERSON DIALS WITHOUT REALIZING THAT THE ACCEPTANCE CODE NEEDS TO BE INSERTED FIRST THE Nortel T7316E?...If you want to temporarily turn them off use do not disturb (feature 85, feature #85 to turn Do Not Distrub off) Turning off the ringing permanently will require you to program the set. Programming is done on M7310, ...regards John








Posted on Mar 14, 2011

Testimonial: "Thank you for your quick response, and help! Its most appreciated. So, for my next question How do I program the M7310 :)"

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Dialtone but no ring only beep


Sounds like its either going offline maybe checking the outlet and the cord that plugs into the base. It may also be the battery needs replacing,it has been run down and charged again too many times.it may hold enough for a dial tone but not enuff to even ring,just beep I stead

Jul 01, 2013 | Phones

1 Answer

How to change ring tone? Lost manual.


usually this is done one of two ways
if the phone has a menu button
press it once then use the arrow keys until you see "ring" or "ring tone" in the display
then use the arrow keys again and you should hear different ring tones. when you find the one you like press the menu button to lock it in

if the phone has a program button and no menu button
keep pressing the program button until you see "ring tone" in the display.then use the arrow keys until you hear the ring tone you like. then press the program button several times until you exit the programming mode.

you can follow the above steps to set the ringer volume also

Jul 16, 2009 | Uniden Cordless Phone

1 Answer

Just got this used phone for school.how to change the ringtone It's a very annoying one now.


usually this is done one of two ways
if the phone has a menu button
press it once then use the arrow keys until you see "ring" or "ring tone" in the display
then use the arrow keys again and you should hear different ring tones. when you find the one you like press the menu button to lock it in

if the phone has a program button and no menu button
keep pressing the program button until you see "ring tone" in the display.then use the arrow keys until you hear the ring tone you like. then press the program button several times until you exit the programming mode.

you can follow the above steps to set the ringer volume also

Jul 15, 2009 | Uniden Cordless Phone

3 Answers

Wharfedale IN120 wont stop beeping


i have a wharfedale in120 cordless phone i can ring out but can not get a ring tone in ..... i have tryed everything

May 22, 2009 | Phones

1 Answer

BIS 34-D phone - Display window blinks date time beeps multiple times/day


The display will blink if power is cut either by unplugging or if the control system is power-cycled. The cause of the power glitches needs to be located & corrected. Changing the ring tone/cadence depends on which control unit is being used.

May 27, 2008 | AT&T Merlin BIS 10 Phone

2 Answers

PHONES WILL NOT RING ON A INCOMEING CALL


COMO ARMAZENO NUMEROS NA MEMORIA DO KX TC 1488 LBB?

May 11, 2008 | Vtech VT-9118 Cordless Phone

1 Answer

Cant get ring tone or phones to work


This question was posted on the troubleshooting page for the VT-9118. This answer is specific to this model; other models have slightly different sequences.
The VT-9118 can use one of 4 different ring tones, and can be turned off. 

To reset your ring tone: 
  1. Remove the handset from the base. 
  2. Press PROG. You should hear a single short beep.
  3. Press #.  You should hear a single short beep. 
  4. Press a number 1 through 4. You should hear a long "ring" tone (it might be startling!). You can try other numbers from 1 to 4 to hear them all.  
  5. Press MEM to confirm your ring. You will hear a medium beep. 
To turn the ringer off, follow the same instructions, but choose number 5. 
 
Hope this helps you. If you need for information, you can download the user manual from http://www.vtechphones.com/docMgt/public/art/313/vt9118.pdf 

Mar 13, 2008 | Vtech VT-9118 Cordless Phone

4 Answers

Phone not ringing


Just recently the Innovage LED touch screen phone stopped ringing. It has worked perfectly as a home office phone since Oct. 2005. Cannot find anything in the tiny manual to correct this problem.

Dec 26, 2007 | Vtech VT-9118 Cordless Phone

Not finding what you are looking for?
Aastra Telecom Aastra MDC Centrex Telephone Logo

Related Topics:

2,443 people viewed this question

Ask a Question

Usually answered in minutes!

Top Aastra Telecom Phones Experts

Jose Ma DM.
Jose Ma DM.

Level 3 Expert

485 Answers

voyager663rd

Level 1 Expert

22 Answers

kakima

Level 3 Expert

96608 Answers

Are you an Aastra Telecom Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...