Question about Onkyo TX-DS484 Receiver

1 Answer

My receiver doesn't sound enough

First at all, excuse me becouse my english is horrible, i know. I'm spanish. I have this unit and of course with problems. Everything works fine but the sound is very low, without volume. I've tried changing the speakers and with earphones but without sucess. What can i do to solve this problem? Has anyone any idea? Thank you.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert whose answer got voted for 500 times.

  • Master
  • 3,130 Answers
Re: My receiver doesn't sound enough

If you have low sound, i would first advice you to double check all of the Tape Monitor switch, and make sure they are not turned on. If there is zero volume, I would say you have a problem with the output curcuit,and or the power supply section on this unit. if you know how to work on solid state equipment, get a schematic diagram, and state from there. If you do not have any repair experience, Im sorry to tell you my freind, there are no user replaceable parts in this unit. There is no quick fix for this unit. Good Luck Please do not forget to rate this thread.

Posted on Nov 27, 2006

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Como esta?

Bien.E too?

You're going to have to write in English, because I only know a few words in Spanish.

Dec 19, 2014 | Yamaha Audio & Video Receivers

4 Answers

No sound from the receiver

yes it will be a capacitator or resistor has blown in the machanie

Jul 30, 2008 | Onkyo TX-SR502 Receiver

1 Answer

Can't change back to english from spanish


While I'm not an expert on answering machines, if you enter the menu setup, there will be a selection for language. Set to English. If you can't find that, try pulling the power for an answering machine for an hour or so. Plug it back it. It should revert back to the factory settings; English, if you're in the USA.

Dec 28, 2013 | Audio & Video Receivers

1 Answer

Radioshack manual

Three things:
1. Go back to Radioshack or the store where you bought it and ask for assistance to reset the radio.

2. Find a Spanish speaking - reading friend who could help you reset the system.

3. If unit has a brochure , you might try following instructions via images on brochures and gut feel if your doing it properly , them maybe you may be able to get it back to english settings.

Dec 28, 2013 | Audio & Video Receivers

1 Answer

V420/ Mini Plus Spanish Manual?

Try these links to downlaod the user manual to your foodsaver. I've its user manaul, but not in spanish. It is in English. - United States
eventhough you have downloaded the user manual in English language, you can transilate it into Spanish, by Google translation window.

Feb 13, 2012 | Audio & Video Receivers

2 Answers

Hi ! I have a Pioneer AV receiver VSX-D710S and i have a problem with sound ! At the maxim volume (0db) the sound it's verry low an when i make volume ajustments i heard in speakers some knoking !...

The first thing you need to do is to disconnect all the speakers.

Then connect them one at a time and see if you get the correct volume on any of them.

If you don't get the correct volume on some of the speakers then it's those speakers that are faulty.

If you don't get the correct volume on any of the speakers then the fault is with the internal amplifier and you'd need to take it to get it repaired.

Jul 29, 2011 | Pioneer VSX-D710S Receiver

1 Answer

AVR-3300 Static and Sound Loss

The Denon Curse.......the connectors that the input boards ( up and down if your receiver is in the normal position ), plug into one of the 2 main boards on the bottom. These connectors are suspect and need to be cleaned and re-soldered. Same with the board that runs from the input side of the unit ( right behind the front panel, running across the unit ) to the amplifier board. Denons were HORRIBLE for bad connections with these. This is an involved repair requiring the entire thing to be pulled apart. It is not an afternoon job for a do-it-yourselfer, take it to an authorized Denon repair shop, as I GUARANTEE that they have seen this problem many times for all models from 2000-01-02-03. Good luck..... Rob

Jan 18, 2008 | Denon AVR-3300 Receiver

1 Answer

No Sound

Your outputs IC'S are probably hammered. You can check these easy enough if you have a DVM. Digital Volt Meter. Let me know if you need more assistance. GURU JAY

Dec 31, 2007 | Yamaha HTR-5650 Receiver

Not finding what you are looking for?
Onkyo TX-DS484 Receiver Logo

110 people viewed this question

Ask a Question

Usually answered in minutes!

Top Onkyo Audio & Video Receivers Experts

 Mike M
Mike M

Level 3 Expert

3320 Answers

D. E. Hev

Level 3 Expert

1059 Answers


Level 3 Expert

2963 Answers

Are you an Onkyo Audio and Video Receiver Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides