Question about Whirlpool Ultimate Care II LSQ9549L Top Load Washer

2 Answers

Softener getting all over top rim of washer

I have a Whirlpool Gold Ultimate Care II machine. I put the correct amount of softener in the dispenser and previously never had problem, but now when clothes are done washing I find the whole top ring of the machine is splattered with softener. I have dumped MUCH hot water in the dispenser thinking it may be clogged to no avail. I have also tried to pull up on dispenser to remove to possibly clean it out but it does not want to come off and I do not want my machine to break. PLEASE HELP!!

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Dumped even more HOT HOT HOT water while poking around inside dispenser. Softener dispenser suddenly became unclogged and water began running out of the opening showing me that the dispenser was indeed clogged with softener buildup.

Posted on Nov 14, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Sergeant:

    An expert that hasĀ over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 324 Answers

I tell people to dilute it with water so it is not as thick.

Posted on Nov 14, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My ultimate care II washer does not have a fabric softener dispenser, is this a manufacturers defect?


are u sure its not just the cap to place fabric softner is missing? possibly in the center of agitator

Sep 05, 2014 | Whirlpool Ultimate Care II LSQ9564J Top...

1 Answer

It did not come with the manual. How do you use the Fabric Softener Dispense?


just put the softener in the disp. it will dispense in the machine automaticaly

Sep 02, 2011 | Whirlpool Ultimate Care II LSQ9549L Top...

1 Answer

Fabric softener does not despence


Hi

You'll need to clean the dispenser by removing it. Use white vinegar and spray then spray the dispenser & agitator with it too. Use hot water after a minute and vinegar will wash out the softener. Try using a soft brush to clean it. Try running a cycle with hot water and bleach (use no soap). Avoid using large amount of soap. Hope this helps... Please post back if you need more information.

Daniel

Nov 16, 2010 | Whirlpool Ultimate Care II LSQ9549L Top...

1 Answer

Cleaning Fabric Softener Dispenser


it does come apart it is stwited in from the bottom up . but you can soak it in some hot water and shake it it will come clean after a bit

Jun 02, 2010 | Whirlpool Ultimate Care II LSQ9549L Top...

1 Answer

How do i clean the Whirlpool Gold american collection top loading washing machine? I can see no filter to remove and the inside of the tub is getting dirty. The holes inside the tub at the top seem to be...


Dumped even more HOT HOT HOT water while poking around inside dispenser. Softener dispenser suddenly became unclogged and water began running out of the opening showing me that the dispenser was indeed clogged with softener buildup.

Sep 20, 2009 | Whirlpool Ultimate Care II LSQ9564J Top...

1 Answer

Musty Smell


spray motor and gear housing surrounding with insecticide, roaches may be nesting there that gives out the foul odor

May 19, 2009 | Whirlpool Ultimate Care II LSQ9549L Top...

1 Answer

How much softener do I use in my dispenser


you don't need to add water to the softener, one capful on it's own will suffice.

Jan 14, 2009 | Whirlpool Ultimate Care II LSQ9549L Top...

2 Answers

Fabric softener dispenser


If you cannot get the dispenser cap opened, submerge and soak it in some hot water. Liquid fabric softener is a type of wax that, over a period of time, will harden and clog the dispenser (as you well know by now). In many cases you do not have to take it apart if you just use the hot water method. You may have to rinse and repeat several times. Try this and let me know if you have any luck. If you require further assistance, please post back with your complete model number, so I can see what type of dispenser cap we are talking about. I hope this helps you.

Aug 14, 2008 | Whirlpool Ultimate Care II LSQ9564J Top...

1 Answer

Frabric softener dispenser


try adding the reccomened amount then filling the rest of the way with water also just pull up on the dispencer cap to remove it and clean

Jul 03, 2008 | Whirlpool Ultimate Care II LSQ9549L Top...

Not finding what you are looking for?
Whirlpool Ultimate Care II LSQ9549L Top Load Washer Logo

Related Topics:

190 people viewed this question

Ask a Question

Usually answered in minutes!

Top Whirlpool Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8147 Answers

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Mike Cairns
Mike Cairns

Level 3 Expert

3053 Answers

Are you a Whirlpool Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...