Question about D-Link DFL-800 Firewall

1 Answer

How to open outgoing tcp connection...... i'm facing errors in sending sms to mobile while connecting from internet........... the details are as follows Log Out...Could not Connect... Dear User, If you are behind a firewall or within a company local area network (LAN), you will need to open outgoing TCP connections to Port 51215 on your proxy server.

Posted by on

  • 1 more comment 
  • Anonymous Dec 09, 2008

    open outgoing TCP connections to Port 51215 on your proxy server. I 've facing the message again again can someone help us

  • zahidmajeed Jan 14, 2009

    same problem

  • afshan_iqbal May 25, 2009

    i cnt send sms to mobilink.it gave me alwayz error dat u could nt connect and If you are behind a firewall or within a company local area network (LAN), you will need to open outgoing TCP connections to Port 51215 on your proxy server.

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 86 Answers

Follow these steps:
Start-> Run-> cmd
In the black box type: ipconfig [enter]
You should see some numbers like this:

192.168.*.* IP
255.255.255.0 Sub
192.168.*.* Gateway

Go to an Internet Browser and plug in your Gateway address like this:
http://192.168.1.1
or
http://192.168.0.1

Now your username and password will be like:
admin:admin
admin:1234
admin: {no password}
{nouser}:admin
{nouser}:1234
You get the drift.
Once you are in you can manipulate the firewall and port forwarding settings...

Posted on Dec 11, 2008

4 Suggested Answers

  • 1 Answer

SOURCE: problem in proxy settings

Log Out...Could not Connect...
Dear User, If you are behind a firewall or within a company local area network (LAN), you will need to open outgoing TCP connections to Port 51215 on your proxy server.

Posted on Nov 24, 2008

  • 468 Answers

SOURCE: Dear User, If you are

openPort 51215 on firewall

Posted on Aug 13, 2009

rcw1962
  • 2571 Answers

SOURCE: firewall

???????????????

Posted on Jul 31, 2010

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How can I download purchased items on itunes (error 8003) from behind a Cisco RV220w firewall?


Configure the Cisco to "log everything", and then try the iTunes download. Then, examine the log-files, to see which connections were blocked. Then, configure the firewall to "allow" those TCP-ports.

Apr 23, 2014 | Cisco RV220W RV220W-A-K9-NA Wireless...

1 Answer

3crevf100-73


Configure the 3COM to direct all incoming 3389/TCP traffic to 3389/TCP on the "private" IP-address (192.168.xx.yy) of your server.
Configure your server to "allow" Remote Desktop connections, and add the ID/password details that will be allowed to login to your server.

Apr 23, 2014 | 3Com OfficeConnect (3CREVF100-73-ME)...

1 Answer

NAT session table is full


For each connection (TCP or UDP) that your firewall manages to NAT (ie network translate) keeps track on a in memory table. If it gets full means you've too many open connections. This is often the case when using P2P programs such as Torrent, eMule etc.

You can:
1) reduce the connection usage on the P2P application
2) reduce the connection timeout, in order to force the firewall to close stalled connections, recovering some free entry on the nat table
3) upgrade the appliance to something more heavy duty. Any box running pfSense for example could be a good choice: the web GUI is quite similar to the ZyWall one, but the software is both free and more powerful...

Dec 11, 2013 | Zyxel ZyWALL 70 Firewall

1 Answer

How do i open a specific port on my soniwall tz210 firewall router?


Ports are communication channels for computers and networks.

Certain applications that run over or connect to the Internet require the use of certain ports.


Firewalls block the use of many ports because they can be like open doors, which viruses and hackers use to gain control of your computer.


However, if you have an application that needs to use a port that the firewall has blocked, you can go into firewall and open that port.


Following these instructions will allow you to open a port in the Windows Firewall and give you guidance for other firewalls.


Go to the control panel and click on "Windows Firewall."

If you are using another firewall application, open that application from the Programs menu.


If you are running Microsoft Firewall, you will have to work with both applications.

Verify the status of the firewall.


The first pane that comes up is the general tab and it should indicate whether the firewall is on or not. If the Firewall is not on, chose the "on" option and click "OK."

Open the Firewall application.


Go to the "Exceptions" tab and choose "Add Port."

Give the port opening a name.


Type in the port number you want to open, then choose either "TCP" or "UDP."

In most cases you will select TCP.

UDP is used for connectionless networking that doesn't require an initial connection to send information.


Or right click on the "Network Internet Access" in the bottom task bar select open network and sharing then select see full map you will see all available connections


Hope this helps

Oct 03, 2012 | SonicWALL TZ 210 (01SSC8786) Firewall

1 Answer

Where do i enter my code #


Hello.

Not certain of your question, but first, set up a single PC to connect to the SG565 unit. Information is entered from that PC.

The initial steps are:

1 Connect your administrative PC to the SG unit:
- If you are setting up the SG560, SG565 or SG580, attach your
PC's network interface card directly any network port on switch A
(A1 - A4) using the supplied network cable.

2 Modify your PC's network settings to enable communication with the
SG unit. Click Start > (Settings >) Control Panel and double-click
Network Connections. Right-click Local Area Connection and
click Properties.
Note: If there is more than one existing network connection, select the
one corresponding to the NIC to which the SG unit is attached.

3 Select Internet Protocol (TCP/IP) and click Properties. The
Internet Protocol (TCP/IP) Properties dialog box is displayed.

4 Select Use the following IP address and enter:
- IP address: 192.168.0.100
- Subnet mask: 255.255.255.0
- Default gateway: 192.168.0.1

5 Select Use the following DNS server addresses and enter
Preferred DNS server: 192.168.0.1

6 Click OK and Close

Hope this helps.

Jan 20, 2011 | SG565 (SG0186US) Firewall

1 Answer

Firewall


???????????????

Jul 31, 2010 | D-Link DFL-800 Firewall

1 Answer

Urgent


hi,
As per your description,in your d link firewall outgoing 51215 port is not opened.go to the access-list or security policy or access rule (I am not sure about the name) tab.make a entry like
from :your ip or network id
to:the sms site ip.
service:51215
action:accept.

Regards,
Mani.S

Mar 10, 2009 | D-Link DFL-800 Firewall

2 Answers

Problem in proxy settings


Log Out...Could not Connect...
Dear User, If you are behind a firewall or within a company local area network (LAN), you will need to open outgoing TCP connections to Port 51215 on your proxy server.

Oct 27, 2008 | Computers & Internet

2 Answers

Firewall trouble shooting


Restart your computer and immediately start pressing F8
A list should appear, select Safe Mode with Networking
Try Runescape and see if it updates, if it does there is something running n your system that is blocking the conection.
If it cannot update we need to know if you have a router or gateway and it's make and model.

Oct 02, 2008 | Computers & Internet

Not finding what you are looking for?
D-Link DFL-800 Firewall Logo

3,143 people viewed this question

Ask a Question

Usually answered in minutes!

Top D-Link Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2259 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18333 Answers

Mike

Level 3 Expert

4332 Answers

Are you a D-Link Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...