You will have to select corect machine model in service mode 200 , nomaly it is d but you will have to select between 1 and f to find the corect setting or just make sure that your cable is connected corectly
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
I found an error D08-227. Have you scrambled 'D' and 'P'?
Error type D08: Master making unit not set
Error point 227: Master making unit lock sensor is still OFF when the master making unit is set in position (timeout: 5 seconds).
Hint: Check mentioned sensor.
In addition:Error type P08: Communication error with CI
E16 indicates a motor lock with the inking motor. Disassemble the ink pump unit and check for proper rotation of the inking motor itself. This error is caused by a current overload. Also, remember to try powering on the machine while holding down the reset key to clear all error codes first.
Risograph C1610 Error E 78 - Problem was fixed by re attaching the detached cable inside the top scanner. you have to take apart the scanner on top and re attache the cable and that should get rid of the error