Question about Maytag MAH2400A Front Load Washer

1 Answer

MAH2400AWW washer won't drain

My Maytag MAH2400AWW washer won't drain -- it makes a loud buzzing noise. Before it started doing this, it showed "nd" on the display once.

Is the pump dead or is it just clogged? Where is the pump and how do I get to it? There's still water in the machine.

Posted by on

  • my_fixya Nov 12, 2008

    I'm still having trouble getting to the pump. Removing the 3 screws at the bottom allows me to lift the white front panel (where the door is) up a bit but it's still somehow hinged at the top.

    Is there no way to remove the silver panel?

    Did you mean I need to tilt the machine and access the pump from UNDER the washer? This could be difficult because there's a dryer stacked on top of it...




×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 63 Answers

Pump is plugged unplug washer lean back against wall under unit right front 2, 5/16 screws lets pump free take hoses on both sides free check for coins after pump and objects before pump and in pump clear reinstall if clear replace pump just had 2

Posted on Nov 12, 2008

  • coronachick5 Nov 14, 2008

    unstack dryer ,tilt washer back ageist wall go under washer front right its easy

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to repair nd code on a maytag mah2400aww washer


Remove the back panel (2 screws). On the bottom tray is the water discharge pump. Clear any obstructions.

Nov 14, 2012 | Maytag MAH2400AWW: Compact Front Load...

1 Answer

Washer Flashing Error Code ND; door won't open after turning washer off


Hello,

The ND error code means NO DRAIN. ,

The usually reason the door remains locked once the cycle is over is because the filter screen on the drain pump is blocked so not all the water could drain out...the door lock is tied into the pump and until the pump tells the control board that the wate r is out the door will not unlock. This tip i wrote will show ya how to take apart the washer to clean the filter on the pump.
http://www1.fixya.com/support/r10121384-check_when_duet_washer_door_locked_after



GENE

Sep 23, 2011 | Maytag MAH8700A Front Load Washer

2 Answers

My washer stopped working and is displaying the code nd, what does this mean?


Hello & Welcome to FixYa

ND error in your Maytag Front Load washer indicates no drain issue. To start with check the drain hose for any clogs and try cleaning it, then check restriction in drain pump assembly or loose wire at the pump. Please get back to me if you have any other questions.

Kevin

Feb 15, 2011 | Maytag NFW7200TW Front Load Washer

2 Answers

My amana front load washer wont spin and is showing an "nd" error message. what does this mean and how do i fix it?


Hi


Thanks for using FixYa. From what I understand the error code ND means “No Drain issue”. You’ll need to check for any restriction in pump assembly. It can also be due to a restricted drain hose or loose wire at pump. If after cleaning the drain hose the issue is not resolved then it means the pump has gone bad and unfortunately needs to be replaced. Please do rate the solution if the issue is resolved or post a comment for further assistance.


Thanks
Rylee

Aug 28, 2010 | Maytag NFW7200TW Front Load Washer

1 Answer

Maytag washer MAH2400AWW problem. It stopped in the middle of washing and/or rinse cycle without finishing the work. It won't spin and the water is not draining. It only makes buzz sound and can't start...


Hi and welcome to Fixya. Usually when a unit stops in mud-cycle and the motor buzzes there is something lodged between the wash tub and the outer tub.

Draining must be done manually before you can open the door. You can try dropping the drain hose down and gravity drain the washer. If that does not work then the only other option is to unplug the unit and disconnect the tub to pump hose. Be prepaired for an immediate water mess if you manage to get the hose completely free of the fitting all at once. You only need to drain it until the water level is below the door seal.

Once you get the water out open the door then sue a flashlight to search for what it is that is preventing the tub from turning.

Don't forget to reconnect and clamp the drain hose if you disconnected it and plug the washer back in.

Thanks for using Fixya. Kelly

Feb 08, 2010 | Washing Machines

1 Answer

Can''t get my clothes out... water still inside


does it have a dial that you can manually turn to start the next cycle? You can usually drain the water by pulling the drain hose out from the wall drain behind hte washer....( usually just shoved in the drain not attached) but be aware that when you hold the hose below the water level in your washer it will start to drain. Then perhaps the door will unlatch.

Sep 09, 2009 | Maytag Neptune MAH5500B Front Load Washer

2 Answers

Front Loader will not drain or start...


HI, check the following to address this issue.(nd=no drain)

1. Clogged drain line or water pump
Check to see if there's something stuck inside the pump or the drain hose connected to the pump (pump is usually located at the bottom and towards the back of the washing machine).

2. Water Pump
If the drain line isn't clogged, you may have a problem with the water pump such as a frozen pulley or a broken impeller. If that's the case replace the water pump. Note: if you have a belt driven washer, check the belt(s) for cracks, as this would be a perfect time to replace the belt(s) if needed.

**The most common issue will be an obstructed hose or, line

Jul 25, 2009 | Maytag MAH2400A Front Load Washer

1 Answer

Nd error essage


nd= no drain. loud buzzing noise sounds like something stuck in pump assy.remove the door(2screws) adn other 2 screws oppisite side, and hte front panel comes off giving you acess to the drain pump, pull the hoses and look for the obstruction

Mar 14, 2008 | Maytag Neptune MAH5500B Front Load Washer

Not finding what you are looking for?
Maytag MAH2400A Front Load Washer Logo

2,773 people viewed this question

Ask a Question

Usually answered in minutes!

Top Maytag Washing Machines Experts

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Al Clark

Level 2 Expert

290 Answers

Todd Marr
Todd Marr

Level 2 Expert

77 Answers

Are you a Maytag Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...