Question about Mitsubishi WS-55809 55" Rear Projection Television

2 Answers

TV power will not stay on.

We have a 55 inch Mitsubishi TV WS-55819 Model. TV power will not stay on - green light cuts off after about 2 seconds.

Posted by on

  • Nicole Catino
    Nicole Catino Dec 13, 2008

    It sounds like I have the same problem. The TV turns on for a few seconds (with the timer light), then shuts off. Can someone tell me what part I need?

    Nicole

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

Mine was the 904 and 905 pico fuses in the power board. $4.00 is what the fuses cost me. I put them in myself and have never worked on a tv before....

Posted on Dec 31, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 93 Answers

Not worth to fix.Either power supply,sensor or convertion board are too costly for the part.Buy a new TV.
solutiondoct

Posted on Nov 22, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What does a 2-3 dignostic code on a Mitsubishi 55819 mean?


2blink-then 3 blink---------deflection circuit problem

It is a little misleading but means something in Horizontal or high voltage circuit (covers a lot of area inside the set) is bad.

Going to need a service manual, etc to try to track it down.

Entire chassis for this set can be removed====called a light box.

May 28, 2012 | Mitsubishi WS-55819 55" Rear Projection...

1 Answer

Mitsubishi 55" rear projection TV, wouldn't turn off


um . that model doesn't have a reset button . but if no lights on front of the set even blink when you press the power button on the front or on the remote .then suspect front panel buttons ,with that model.

Sep 29, 2009 | Mitsubishi WS-55819 55" Rear Projection...

1 Answer

Mitsubishi WS-55819 TV Wont turn on.


code stands for loss of vertical. I had one of these if you can check pico fuses, check the ones on the main power board the one with the 2 convergence amps if any of them are blown then most likely the convergence amps have shorted out.

Aug 10, 2009 | Mitsubishi WS-55819 55" Rear Projection...

1 Answer

Mitsubish WS-819 Protective Shutdown. 2 blinks, pause, 2 blinks


Over 95% of the time a 2 - 2 blink code on that model is a convergence output problem. You need to replace both of the convergence output IC's and perhaps the pico fuses feeding them voltage. The pico fuses are F9A04 and F9A05. They are on the same board with the convergence outputs.

May 29, 2009 | Mitsubishi WS-55819 55" Rear Projection...

1 Answer

My tv ws-55819 tv won't turn on it cliks on but it won' syat on


ok when the power is plugged in hold down the menu + device buttens for five sec what is the error code there should be two sets of numbers....
like 1 pause 2 let me know and i'll see what i can do!

Feb 01, 2009 | Mitsubishi WS-55819 55" Rear Projection...

1 Answer

Mitsubishi WS-55819 Won't turn on


If F9A04 and F9A05 are open the convergence ICs will need to be replaced as well as the two pico fuses. You will need two STK392-570 Convergence ICs and two 5 amp pico fuses. You ca get the replacement parts at the following link with free installation instructions. heres thelink.
http://servicemanuals.vstore.ca/

Jan 22, 2009 | Mitsubishi WS-55819 55" Rear Projection...

1 Answer

LED Blinking


Okay 2 blinks isnt a error code, so your set isnt shutting down due to a protection issue, so I would suspect one of the low voltage regulator transistors or the horizontal output transistor as being defective

Jul 06, 2008 | Mitsubishi WS-55819 55" Rear Projection...

2 Answers

It won't power up


You need the HV splitter. You can leave a email at the following link state your model number and let them know you need a HV splitter. They will respond quickly to your inquirery and they will provide free tech support to explain how to change the part.
http://servicemanuals.vstore.ca/

Jul 01, 2008 | Mitsubishi WS-55819 55" Rear Projection...

1 Answer

Mitsubishi ws 55819


Bad convergence ic and should replace caps also

http://home.earthlink.net/~oleg.filippov/ConvergenceFix.htm
http://cmpalmer.blogspot.com/2006/11/fixing-my-own-tv-part-ii.html

caps:
· http://www.chrisandnat.com/Projects/BlinkingTV/blink.htm · http://www.jeremyburns.com/Mitsubishi-Green-Blinking-Light-Fix.pdf
· http://www.fixya.com/howto/h159332-mitsubishi_dm_board_repair
· http://hdtvoice.com/voice/showthread.php?t=32186
replace DM

Nov 10, 2007 | Mitsubishi WS-55819 55" Rear Projection...

Not finding what you are looking for?
Mitsubishi WS-55809 55" Rear Projection Television Logo

Related Topics:

366 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Televison & Video Experts

matt martin
matt martin

Level 3 Expert

1198 Answers

The Knight
The Knight

Level 3 Expert

69654 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Mitsubishi Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...