Send an e-mail
to Charlie at firstname.lastname@example.org for a fix-it that you can try. He
explains a possible solution fully with his 'The Dreaded "F7" Error'
solution. I actually found his information on another website when I
did a web search for "GE Profile Oven F7 Issue". I sent an e-mail to
him and he replied with free fix-it information. I am not a repair
person myself, but, his instructions are very clear and simple to
follow. I did the fix-it at no cost in approximately 10 minutes and it
has solved my problem so far.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Stuck Keypad. Roper ovens with 2 Digit Displays: F0 Defective ERC Replace ERC F1 Defective ERC Replace ERC F2 Oven over heat Replace defective Sensor F3 Oven Sensor Open Check/Replace Sensor F4 Shorted wire or Sensor locate short and correct it or replace Sensor F5 Defective ERC Replace ERC F6 Problem with time keeping circuit Reset Time or cooking operation and check for proper ground F7 Shorted or sticking button Clean button or replace ERC F8 Defective ERC Replace ERC F9 Door Latch Error Check latch and latch circuit
After much searching, I have found that you have a faulty keypad.
The recommended solution is to unplug the oven, or shut it down at the fuse box, and then remove the faceplate where you can then remove the keypad, and clean the connectors with an eraser, as well as the ribbon that connectes the keypad with the oven.
I hope this helps out.
You can find my solution to the most common cause of the F7 problem at the following link:
I have helped over 1600 folks solve the F7 problem. The problem is usually with the touchpanel and not the ERC. My fix tells how to determine which part is faulty. Hopefully you will not need to purchase a new touchpanel, however, if you do, an internet search will lead you to lower cost sources.
Please let me know if my fix works for you. You can email me at: email@example.com