Question about Ovens

2 Answers

Cant remove oven light cover

I have never had to replace my oven light so when it didnt work i thought it would be simple. that light cover is stuck so tight i can barely get it to move . the manual said to turn counterclock wise and i did and nothing happened. is there something i can put on the cover to make it come out. it turns a little but wont come out.

Posted by on

  • papsco Dec 01, 2008

    I have the same problem with my Bosch oven. The whole light fitting will rock slightly as i turn it but the actual glass cover won't budge. I wouldn't be able to get dish washing liquid into the area of the glass cover that is stuck (eg The thread part of the cover). Help!

×

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Try a adjustable car oil filter wrench (cost a couple of bucks at Wal-Mart). Simply put it around the glass cover and give it a twist. Worked great for me.

Posted on Jan 29, 2010

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,651 Answers

You might want to try a drop of dish liquid as a lubricant. screwing back and forth little by litlle it will lloosen

Posted on Nov 12, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Nothing is working in my oven not even the led timer is lighting up


When the timer, clock etc didn't light up my oven stopped working. Replaced the clock display unit and all is now fine. A simple switch over just remove one wire at a time and place it on the new unit, the only difficult part was gaining access to remove the display unit itself.

Sep 08, 2015 | Ovens

1 Answer

The fan works but no heat. Grill work


You need a new oven element. The oven element is not visible inside the oven as it is located around the fan, behind a safety panel. Its a simple DIY job if you are handy. Isolate oven from power. Look inside oven to rear panel where fan is located and there should be 4 screws holding the safety panel in place to cover the fan, Remove cover and you should be able to see the element which will probably be circular and mounted around the fan. Remove the element and take with you to ensure a correct replacement at your parts dealer.

Jul 03, 2015 | Ovens

1 Answer

How do I change the bulb inside the cooker of the B5741 cooker


Oven Lighting
Warning: There is a danger of electric shock! Prior to changing
the oven light bulb:
  • Switch off the oven!
  • Disconnect from the electricity supply.
Place a cloth on the oven floor to protect the oven light and glass cover.
Replacing the oven light bulb/cleaning the glass cover
  1. Remove the glass cover by turning it anticlockwise and then clean it.
  2. If necessary:
Replace bulb with a 40 watt, 230 V, 300 °C heat-resistant
oven light bulb.
3. Refit the glass cover.

25648864-wjkdtau3hzetwygkyoujq3j4-2-0.jpg
Dado

Apr 15, 2015 | AEG Ovens

1 Answer

HOW TO REPLACE THE LIGHT BULB IN MY OVEN


Oven Lighting
Warning: Risk of electric shock! Prior to changing the oven light bulb:
- Switch off the oven!
- Disconnect from the electricity supply.
Place a cloth on the oven floor to protect the oven light and glass cover.
Changing the oven light bulb/cleaning the glass cover
1.Remove the glass cover by turning it anti-clockwise and then clean it.
2.If necessary: replace with 25 watt, 230 V, 300 °C heat-resistant oven lighting.
3.Refit the glass cover.

24472822-skr3uzd4ii43xzwyhmpsswym-3-0.jpg Dado

May 21, 2014 | Electrolux EOB5665G Ultrafan Electric...

1 Answer

Unable to remove blown Blanco oven light bulb-stuck fast


I boiled the kettle, added the hot water to a tray and placed it in the oven, shut the door then left it for 10 minutes so it steams up the oven (make sure power is off first). Do the same again. Then get a multi grip spanner and place a kitchen rag over the cover and turn to the left. It does take a bit of force depending on how stiff it is, but the steam will loosen the cover. The steam also cleans the oven quite a bit too!!

Mar 04, 2013 | Blanco Ovens

1 Answer

Replace light in KEMC378KSS microwave


The oven lights are 12-volt, 5-watt maximum halogen bulbs. They
will come on when the oven door is opened. On double oven
models, both upper and lower lights will come on when either
door is opened. The oven lights will not work during the Self-
Cleaning cycle. When the oven door is closed, press OVEN
LIGHT to turn them on or off.
To Replace:
Before replacing, make sure the oven is off and cool.
1. Disconnect power.
2. Remove glass light cover by grasping the front edge and
pulling away from oven


2_4_2013_9_12_23_pm.png

3. Remove bulb from socket.
4. Replace bulb, replace bulb cover by snapping back into wall.
5. Reconnect power.

Feb 04, 2013 | KitchenAid KEMC378KSS Electric Double Oven

1 Answer

I want to change the light bulb in the oven,.Mod.no.ZDQ695A can you help me.


I will assume that the ZDQ695 bulb replacement procedure is the same as that for the ZDQ695A. The ZDQ695 uses a 25 W appliance light bulb (300 C). Unplug the appliance before starting. Open the oven and remove the racks for space to work. Insert a flat blade screwdriver between the side of the oven and the glass cover above the bulb. With your hand support the cover and pry it away from the wall of the oven until it releases. Push the top of the cover towards the oven wall and use your fingers to pry the bottom of the cover away from the housing. Then remove the cover. Unscrew the old bulb (counterclockwise) and then remove the bulb. Then screw in the new bulb. Replace the glass cover (position the flange so that it is pointing to the back of the oven) by pushing it into the hole to cover the bulb assembly. Replace the shelves and close the oven door before plugging the oven back in.

Zanussi manuals are available here: http://www.zanussi.co.uk/en-gb/Support/Manuals/ . Enter the model number in the search box. Alternatively, the manual for the ZDQ695 is available here: http://kitchen.manualsonline.com/manuals/mfg/zanussi/zdq_695.html . Click on the Get This Manual button.

I hope this helps.

Cindy Wells

Jul 24, 2011 | Zanussi ZDQ695 Electric Double Oven

1 Answer

I have an Amana Double Gas wall oven Model AO27DGW1. The upper light switch seems to have a short or such in it which interferes with the light in the oven staying on. I was wondering if the front panel...


YES IN FACT THE FRONT PANEL DOES COME OFF,, JUST THE DISPLAY BOARD THOUGHT, that is where you can get to the switches,,, but sorry to tell you i cant even get the part i have 7 places i can get parts and all of them say it is discontinued,, thats not saying you cant find one it is just going to be a long and hard processe

Jan 19, 2011 | Amana Ovens

1 Answer

Cover stuck on oven light


is it a wire? tilt wire to a side. if no wire its a glass thread

Feb 10, 2010 | Neff Ovens

1 Answer

Kitchenaid double oven shut down!


The problem is they overheat because hot air is drawn in by the blower and overheats the outer chamber of the oven where the thermo fuse link is. The one or two fuse links are blown simple replacement but have to remove oven (two person job) remove outer shell and find it (them) in the back of the oven. Also the fuse link wire going into the main processor is probably blown.

Sep 06, 2007 | KitchenAid Architect Series KEBC208KSS...

Not finding what you are looking for?
Ovens Logo

Related Topics:

1,029 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ovens Experts

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

ashburton

Level 3 Expert

417 Answers

yadayada
yadayada

Level 3 Expert

76846 Answers

Are you an Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...