Question about Kenwood KDC-MP7028 CD Player

1 Answer

I have a kenwood kdc-mp7028 dont remmber the code

It pops up code and i dont remember it i changed the battery out and now it does not work? need some help please

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 624 Answers

The procedure for clearing the code is below, but first you must understand that you must have the remote to do this procedure. Kenwood has designed these radios so that the only way to clear the code is by using the remote. I know this because I work at an authorized Kenwood service center and have done this procedure many times.

If you do not have a remote, or you can not buy or borrow one, the only other way to clear the code would be to take it to an authorized Kenwood service center and they will do it for a small fee. The shop I work at charges $25 for this, but it is up to each shop as to how much they want to charge.

Here is the procedure:

1. While “– – – –” is being displayed, press [ >>I ] key for at
least 3 seconds while pressing [AUTO] key.
This makes “– – – –” display disappear.

2. Using the remote controller, input “KCAR”.

Press remote controller [5] key 2 times (Input for “K”) and
then press [ >>I ] key.

Press remote controller [2] key 3 times (Input for “C”) and
then press [ >>I ] key.

Press remote controller [2] key once (Input for “A”) and then
press [ >>I ] key.

Press remote controller [7] key 2 times (Input for “R”) and
then press [ >>I ] key.

3. The security is released and the unit enters the STANDBY
mode.

4. If a wrong code is input, the unit goes into the Code Request
mode.

Since this is the only way and it is the correct way to clear the code, I would very much appreciate a FixYa! rating. It is the only reward we get for offering people like yourself this free information.

Let me know if you need any further help, like needing to know where you can buy a remote or whatever other questions you may have.

Dave

Posted on Nov 12, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I put in the security code but i dont know how to actully enter it what do i need to do?


This was answered on http://www.fixya.com/support/t4989381-kdc_mp728_car_stereo_dont_know

To the right of the six preset buttons on the face of the unit is a small small concave reset button. Push this to reset the entire unit. You will lose all your setting and the protection code will also be reset. The factory default is not to use the security code, but I recommend setting it to something you remember because this happens often enough on Kenwoods.

Aug 10, 2010 | Kenwood KDC-MP7028 CD Player

1 Answer

Hi i have a kdc-mp728 car stereo and i don't know the security code number, the sisstem is not operate, how i can turn on the radio?


To the right of the six preset buttons on the face of the unit is a small small concave reset button. Push this to reset the entire unit. You will lose all your setting and the protection code will also be reset. The factory default is not to use the security code, but I recommend setting it to something you remember because this happens often enough on Kenwoods.

May 30, 2010 | Kenwood KDC-MP7028 CD Player

1 Answer

HALFORDS JUST CAHNGED MY CAR BATTERY AND NOW I AM


here is a link on how to reset your kenwood radio using a universal code from kenwood, it doesn't work everytime, but worth trying. you do need a kenwood remote though..good luck
http://www.ehow.com/how_5164864_reset-kenwood-cd-player-code.html

Aug 12, 2009 | Kenwood KDC-W4534 CD Player

2 Answers

How can i connect my ipod to my kenwood kdc-mp7028???


If you dont have an MP3 or Ipod input, then the best way is to buy an FM transmitter. This device plugs into your cigarette lighter and when connected to the Ipod will transmit the signal to the stereo unit. this device is actually like a micro radio station that you have to tune in on the Kenwood. These units are available at Wal-Mart, K-Mart, or online at Ebay, and Amazon.

Mar 24, 2009 | Kenwood KDC-MP7028 CD Player

1 Answer

Kenwood Kdc-MP7028 code


Hi Nancy

Sure I remember you... hard to forget a kiss(specially in here :) It is the "next track" button referred to, and you need to hold it down for 3 seconds or so on some models to get the process to work. Try that and see how you get on. It should solve the problem for you. I know this process works because I have used it many times before. Let me know how youy get on, and I will get back to you a bit sooner next time. Cheers

regards
robotek

Nov 06, 2008 | Kenwood KDC-MP7028 CD Player

2 Answers

Ulock code kdc-mp5028


Type 1
During the code request mode, while holding the DISP key depressed, press and hold the Volume UP or DOWN key for 3 seconds (so that “…” disappears).
Then using your remote enter your code.

Type 2
Press the "Auto" button and "Track up" on face of radio at the same time. The four dash lines ( . . . . ) should "disappear".

Then using your remote enter your code.

Type 3
Model# DPX-4020 and DPX-4030
Press and hold the 1 then the 6 preset key (preset keys are the buttons on face of radio for storing you "favorite" radio stations). "C" should display.
Then using your remote, enter your code.


Enter your number from the remote control unit. Your code number is 5227 (KCAR)

* Press numeric key “5” ( 2 times ) and press the Track UP/Next Track key
* Press numeric key “2” ( 3 times ) and press the Track UP/Next Track key
* Press numeric key “2” ( 1 time ) and press the Track UP/Next Track key
* Press numeric key “7” ( 2 times ) and press the Track UP/Next Track key
by Robotek

hope this helps...

Jul 30, 2008 | Kenwood Car Audio & Video

1 Answer

Forgot Kenwood head unit Code


you can always try the most common number sequences,(1234,1111 etc...) otherwise it has to go to an Authorized service center. You find one at www.kenwoodusa.com under support.

Jan 16, 2008 | Kenwood KDC-MP7028 CD Player

1 Answer

SECURITY CODE


hold the menu button down untill menu pops up on the screen then go down to security hold the puase/ play button down until there are 4 under scores on the screen

Dec 10, 2007 | Kenwood KDC-MP7028 CD Player

Not finding what you are looking for?
Kenwood KDC-MP7028 CD Player Logo

190 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenwood Car Audio & Video Experts

xxxxxx xxx

Level 3 Expert

4807 Answers

yadayada
yadayada

Level 3 Expert

70387 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6878 Answers

Are you a Kenwood Car Audio and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...