Question about Sharp EL-531VB Calculator

I go to set up and it comes up with FSE TAB i try and press 2 becuase thats the decimal place i wont it to but nothing happens any help would be greatly apreciated

Hello,

I do not see why it should not work, but you can try TAB 3. You will have 3 decimal digits. Ignore the extra digit if it is less than 5 round it up if equal to or greater greater than.

Hope it helps.

Posted on Sep 20, 2009

How do I change the decimal point on my Sharp EL 531A calculator.

Posted on Apr 29, 2010

Hi,

a 6ya expert can help you resolve that issue over the phone in a minute or two.

best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).

click here to download the app (for users in the US for now) and get all the help you need.

goodluck!

Posted on Jan 02, 2017

take you sales for the last year and put it into a calculator, then press plus + and then 6 and then the per cent key %

Or

Take your sales from last year, multiply by 6 and then divide by 100. That is the amount you will increase. Add it to last years sales.

Or

Take your sales from last year, multiply by 6 and then divide by 100. That is the amount you will increase. Add it to last years sales.

Jan 09, 2017 | The Office Equipment & Supplies

Try Googling (sharp)(SX9800)(manual) without parens.

Jan 09, 2017 | Sharp Office Equipment & Supplies

Hello Sudhir,

The error code H5 means there was at least 5 pages in a row where the paper did not come out of the printer correctly (most likely paper jams. The following manual will direct you on the steps needed to clear the code, please note especially page #8-3

Service Manual SHARP AR 5618 5620 5623 SME

The following video should help also;

The error code H5 means there was at least 5 pages in a row where the paper did not come out of the printer correctly (most likely paper jams. The following manual will direct you on the steps needed to clear the code, please note especially page #8-3

Service Manual SHARP AR 5618 5620 5623 SME

The following video should help also;

Jan 09, 2017 | Sharp Office Equipment & Supplies

Hello Tijjani,

The error code that you are experiencing is as follows;

**F2 73** IMPROPER TONER CARTRIDGE DETECTION (YELLOW)

You need to replace the yellow cartridge with the proper part #**Item Number:** MX 31NTYA, MX31NTYA.

Good Luck!

Rich Lilja

The error code that you are experiencing is as follows;

You need to replace the yellow cartridge with the proper part #

Good Luck!

Rich Lilja

Jan 08, 2017 | SHARP MX-3100N

1and 5/7 ==1.7142 (5/7 to get decimal point=.7142)

+ 9 divided by minus 1.7142= minus 5.1688

using the maths laws of multiplication and division of numbers where + and - indicies are used +X+ =+ and + X - = - and - X- = +

you will find answers on the web maths pages

+ 9 divided by minus 1.7142= minus 5.1688

using the maths laws of multiplication and division of numbers where + and - indicies are used +X+ =+ and + X - = - and - X- = +

you will find answers on the web maths pages

Oct 06, 2014 | Office Equipment & Supplies

Really depends on the model/maker.

Sharp photocopier? try one of those: (note the capital A and S )

Login Name:**Administrator**

Password:**admin**

or

Username:**admin**

Password:**Sharp**

Sharp photocopier? try one of those: (note the capital A and S )

Login Name:

Password:

or

Username:

Password:

Oct 02, 2014 | Office Equipment & Supplies

Use the words: decimal part, not decimal fractin

**Any number whose decimal part is periodic (has a recurring pattern that repeats indefinitely) is equivalent to a rational number, IS a rational number**

0.345 345 345 ... =345/999=115/333

In the following screen captures, discard the last digit if it does not belong to a period. It is the effect of rounding up of the calculator

**Period is 345**

**Period is 1**

Period is**09**

Period is** 79**

In general, if you have a decimal part of the form 0.d_1 d_2 d_3....d_n d_1 d_2 d_3 ...d_n ... where d_1 is the first digit of the period, d_2 is the 2nd digit of the period, ..., d_n is the n-th digit (and the last one) of the period, then the fraction representation of

0.**d_1d_2...d_n** d_1d_2... d_n ...=(**d_1d_2...d_n**)/(99...9) where the number of 9's in the denominator is equal to the number of digits in the period.

Once the fraction is found, one should reduce it to its simplest form.

0.345 345 345 ... =345/999=115/333

In the following screen captures, discard the last digit if it does not belong to a period. It is the effect of rounding up of the calculator

Period is

Period is

In general, if you have a decimal part of the form 0.d_1 d_2 d_3....d_n d_1 d_2 d_3 ...d_n ... where d_1 is the first digit of the period, d_2 is the 2nd digit of the period, ..., d_n is the n-th digit (and the last one) of the period, then the fraction representation of

0.

Once the fraction is found, one should reduce it to its simplest form.

Mar 02, 2014 | Office Equipment & Supplies

you cant you have to get a scientific calculator with the carrot symbol like this ^

Sep 14, 2013 | Office Equipment & Supplies

move the decimal 2 places to the right. 7%

Jan 27, 2012 | Office Equipment & Supplies

4,794 people viewed this question

Usually answered in minutes!

i cant changel the decimal on the ROYAL XE72?

×