- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
If your computer is able to go online through the modem Then you need to connect the computer to the router ad the modem to the router. open the set up page of the router and change the settings of the router according to the ISP. Click Here for step by step by instructions
You have the right gizmo there. You just need to set it up correctly. If you are in the US contact belkin @ 1 800 223 5546.
You need to know your ISP type first before trying to contact them. Know if you have a PPPoE (High speed DSL with password) Dynamic IP internet (no user name or password required to connect to the internet, usually used by cable internet providers)
After you find the right information just contact belkin and they will assist you with the proper router usage.
There is a little hole on the back of router, push that button inside for 5 sec with a paper clip. That should reset. You will need to setup a password. I usually make mine my phone number. Thats easy to remember and tell guests.
The WEP key is something you designate on your own router. IF you are trying to get into someone else's router you need to ask them for permission to have their WEP key. Otherwise you cant get in. If you forget your WEP key you can do a hard reset on the router to clear out the key.
Anyways, with the assistance of Belkin Technical Support you will log-in to your router's control panel as I have shown how to do in these directions. After logging in to your router's control panel, Belkin technical support will help you setup your configuration so that the router connects to the Internet and allows multiple computers to connect to the same Internet connection.
1. check your wireless adapter TCP/IP settings if its set into "Obtain as IP address Automatically". 2. if the settings is set as Automatic and your not getting IP address then select "Use the following IP Address" 3. use IP address followed to your router address like if192.168.0.1 in router type192.168.0.2or192.168.0.3just check the next address IP in your network. 4. after typing subnet IP will automatically set 5. type the router IP address as your default gateway 6. click OK to save your new settings
There can be a problem with the settings of the router that's why only 1 computer is working with it, the best thing that you can do here is to reset the router and reconfigure it back, To reset it press and hold the reset button for 15 seconds while the power is ON then if you have the setup CD you can just run it like when you first install the router but if not you can also manually reconfigure the router if you're not familiar on how to do a manual setup on the router better call Linksys tech support to walk you through with that process they are open 24/7 this is the number 800-3267114...