Question about Televison & Video
SOURCE: need tv code list for urc-4605
Hello, follow this link to download the manual and the codes for your remotes:
just right click and save as on the download links.
if this does not work you can try the search method,
you do this by either holding down the device button eg: TV or if you have one the "magic" button for three seconds, a light should then flash twice to say you have done this correctly.
then press the keys 991 then the power button.
you must now press the channel up key (ch+) possibly upto 150 times while the remote cycles through every code.
Once your tv or device switches off stop pressing the ch+ key and press the power button to make sure it switches back on,
(if you press ch+ too many times you can go back by pressing ch-)
When complete press the magic or device key again to save the settings (light should flash twice to confirm)
(For low price replacement remotes visit www.sparky-uk.com)
Posted on Feb 25, 2008
SOURCE: REMOTE CONTROL SET UP CODE
You can find the remote control codes for different brands
of devices from
If none of the codes work then we have two other solutions:
1. Searching For Your Code
If you have tried all of the set-up codes for your brand of equipment ,or your brand is not listed, and you are still not able to get the unit to respond, try the following procedure to search for your code.
If you don't find a code that works, the remote will flash four times when you reach the end of all the codes for this device type.
Make sure that the remote is pointed at your device during the search, You may have to press this sequences of buttons up to 100 times to search the entire library of codes.
2. Learn the buttons from the original
Line up your original remote and the head-to-head before completing the following steps.
Now you can repeat steps 3 through 5 to learn other functions onto other keys or press and hold SETUP until the Cinema's red light flashes twice to lock in your new feature. (If the red light does not blink twice, stop and repeat steps through 6).
To test the new feature, press and release the device key in which the new feature was learned followed by the key on which the feature was learned
More help for programming your remote can be found here:
Hope that helps!
If your issue is not resolved, please do not assign a rating just yet. Please post back as to what steps you took, results, etc, and I will try to assist you further as best I can. I am here at your service.
P.S. - You can rate a solution with one of four ratings as explained under (remember that at times a bit of to and fro dialogue may be necessary to resolve an issue).
Posted on May 05, 2008
SOURCE: URC of NTL/UPC in ireland
Originally Posted by NTL
To over come this the DVR remote can be tuned to set the volume through the STB instead of the TV set
You can set this up using the following 'quick guide'. Please be advised that you don't see anything happen on TV or the STB while you're doing this
- Press the UPC button. The UPC button will illuminate once.
- Press RED and OK together until the UPC button flashes twice
- Enter code: 993 (after the last digit the UPC button flashes twice again)
- Press the volume up button (the UPC button flashes four times)
- When this is done, the remote control won't send IR-command's to the TV set but only to the STB, including volume and mute
Posted on Jul 14, 2008
Tips for a great answer:
May 13, 2010 | One For All URC-1030 Remote Control
on May 30, 2010 | One For All URC-4021 Remote Control
on May 30, 2010 | One For All URC-3300 Remote Control
May 20, 2010 | One For All URC-1030 Remote Control
Apr 05, 2010 | One For All URC-3021 Remote Control
on May 30, 2010 | One For All URC-4605 Remote Control
Mar 01, 2010 | One For All URC-3021 Remote Control
Jan 05, 2010 | One For All URC-3021 Remote Control
Oct 06, 2009 | Universal Remote Control Remote Control
Jun 26, 2017 | Televison & Video
29 people viewed this question
Usually answered in minutes!