Question about Venturer 3.6" Portable DVD Player

1 Answer

I insert disk but it doesn't load. It says no disk.

Disk never spins.

Posted by on

  • Anonymous Nov 18, 2008

    same

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,992 Answers

The disc won't start spinning until the player senses the disc is there. If the lens on the laser inside that reads the disc is very dirty, it can cause this problem. You might try cleaning the lens with a cotton swab moistened with lens cleaner or isopropyl alcohol.

Posted on Nov 21, 2008

2 Suggested Answers

techman
  • 3130 Answers

SOURCE: DVD will not load/format new disk

Wait!! this units not that old??? if it isent dont touch the mechanism try calling 1-800-samsung and see if they will repair it for you for free??. good luck

Posted on Apr 10, 2006

  • 2427 Answers

SOURCE: DISK WILL NOT SPIN

The disc drive motor need replacing..

Posted on Jul 17, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

When loading a dvd it displays, "NO DISK". Is it


Hello
There are mainly three motors for most of the DVD players. One to spin the disc we insert in, other to load the laser pickup unit to-and-fro inside it to read the disc and an other one to load the tray mechanism 'in-out'. According to your description, the disc spins inside, and you can hear its spin. So motor which spins the disc has no trouble at all I should say. Then comes to the second motor that moves the laser assembly inside it. If it do not work, the laser pickup unit won't move and no reading will take place and 'No Disc' display will be the result. The last chance is with Laser Pickup Unit itself. Just get this unit repaired by any well experienced service technician or by the authorised service center, because, there are special tools to open this unit. As it is a compactable one, more care should be given to it while repairing. Suspect the second motor I described earlier, and the Laser Pickup Unit. OK.

Jun 14, 2011 | RCA DRC628 Portable DVD Player

2 Answers

Error reading any dvd disks


Have you tried a DVD+/-RW ?

The noises that you are hearing will be the spindle motor trying to spin the DVD as the lifting presentation tray for the read/write head has not located, if the media is not spinning this will never be able to read the lead in on any DVD as it has not presented the disc in the correct place.

If is is out of guarantee then I suggest that you check to see if the DVD is spinning by removing the top cover with the power OFF then eject the tray and try to load the media a small touch of the DVD in the clockwise motion should cause the media to start spinning, this is for diagnosis only if this is the case then the spindle motor will need changing

May 28, 2010 | Panasonic DMRES15 DVD Recorder

1 Answer

When i put a dvd in the player makes noise and screen says no disk or unable to read


Sounds like the mounting spindle is out of alignment, meaning the disks you load into the player are not spinning in a balanced, stable position. Without this being the case the laser pickup will not be able to read the disk and the unbalanced disk will cause a noisy hum and you may even be able to feel vibration in the player itself to confirm this. Sometimes the noise and vibration is a disks fault but if it occurs on any disk you insert (and can confirm the same disks work ok with no noise in other DVD players) it will be the players mounting mechanisim that is not playing the game properly I suspect.

Aug 18, 2009 | Polaroid DPA08055S Portable DVD Player

1 Answer

With disk in, says no disk


Open up the cover of the dvd deck hook it up to ac outlet power up and and insert the cd, have a close look as the cd is loading. If your CD spin and the there is a red light coming or flickering from the back of the CD and the spins that means it needs CRC cleaner.
IF it spins and stop after 5 secs then it the motor that needed to changed.
If no light coming from the back of the CD then it a laser broblem.
Never run the DVD with no CD on as the light coming from the laser can cause blindness.



THKS

Jul 22, 2009 | DVD & Blu-Ray Players

1 Answer

Toshiba sd-4990 dvd player will not load a disk


Your toshiba is not spinning that's why it keeps on saying loading. Unplug the dvd Open the device,once open plugin the dvd and put the dvd cleaner in the player. take your finger on the top where the dvd disk is and spin the disk. What happening is that you are cleaning the len. keep spinning until it spin on its own.Put the toshiba top back on and clean again. It should clean on it's on. Now you can play your dvd. Clean your dvd on a regular basic.

Mar 12, 2009 | DVD & Blu-Ray Players

1 Answer

"No Disk" message on front display


If when you insert the disk you hear a whirring and clicking noise, CD spins, and does not read, then that is a problem with the DVD lens.

The DVD lens try to focus on the DVD track, by moving lens pickup and spinning the disk, but cannot read the tracks because the lens is dirty or defective.

Try first cleaning the lens with a DVD cleaner disk. And also if you can see the lens from the outside try blowing some canned air on it.

If this still does not help, then the lens pickup may be faulty, in this case you often replace the whole DVD drive unit inside the DVD player.

Dec 27, 2008 | Pioneer DV-343 DVD Player

2 Answers

H02


This weekend we were watching a movie. It started to skip. I thought it was a dirty disk, took it out, cleaned it with a dry cloth and put it back. Now nothing will play.

When I insert a disk it starts to revolve the machine says reading, two zeros appear and the it stops. My wife noted a message H02 and the manual says to call for an explanation.

We tried turning the machine off and on and we tried pulling the plug -- no luck. What is the problem?? Jeff

Apr 06, 2008 | Panasonic DVD-RP56 DVD Player

1 Answer

Matsui Portable DVD player


First Clean the lens:
http://www.ehow.com/how_2036275_clean-lens-dvd.html

Jan 24, 2008 | Symphonic WF803 DVD Player/VCR

3 Answers

DVD starts to load but does not play.


Not sure if anyone found this solution, worked for me.
1. Press SETUP
2. Press FFW, F REW, NEXT, PREVIOUS
3. Change the code to 255 using the RIGHT arrow key

This will unlock the DVD player for all regions.

Jan 26, 2007 | Coby TFDVD5000 Portable DVD Player

1 Answer

Disk is "shot" out from the player still spinning fast


Maybe got damaged during shipping?? Try also to clean the lens. Theres not alot the consumer can do with a cd or dvd player as you need special equipment to work on these units as there are no user serviceable parts inside. If its a good unit maybe it would be worth a look at by a pro. Good Luck

Jun 26, 2006 | Pioneer DV-533 DVD Player

Not finding what you are looking for?
DVD & Blu-Ray Players Logo

Related Topics:

401 people viewed this question

Ask a Question

Usually answered in minutes!

Top Venturer DVD & Blu-Ray Players Experts

The Knight
The Knight

Level 3 Expert

68180 Answers

Arcadian Duran
Arcadian Duran

Level 2 Expert

284 Answers

john milligan

Level 3 Expert

512 Answers

Are you a Venturer DVD and Blu-Ray Player Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...