Question about Keurig B60 Coffee Maker

1 Answer

Coffee maker makes cream curdle

Yesterday, I descaled the coffee maker. Today I put 1/2 and 1/2 in the cup, then put under the dispenser just like I have been doing for 1 yr. The milk curdled. I tried this 3 times. Th 4th time I nuked the milk first, then put coffee in. Still curdled. What's up.???

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 2 Answers

Run two or three reservoirs full of plain water through the machine to rinse out the descaler, which is acidic.

Acid curdles milk.

Posted on Nov 21, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Repairman can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Repairman (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

When I press the espresso button instead of esspreso makes a long coffe .I must ad I descaled it yesterday .


You may have accidentally changed the amount setting for your espresso shot when resetting the descale counter.

If you lost the manual you can find one here.
http://www.gaggia-usa.com/support_docs/Gaggia_Brera_Quickstart_Guide.pdf

On page 11 (with the printed number 31) you find how to change these settings:

• Place a cup under the dispensing spout.
• Hold the "espresso size" button pressed for 5 seconds to enter the programming mode; the "coffee" icon will blink quickly and the coffee will start to be brewed; the icon will flash during the whole coffee brewing cycle.
• Press the same "espresso size" button again when the amount of coffee in the cup reaches the desired level.
At this point the button "espresso size" is programmed; each time it is pressed and released, the machine will brew the same amount of coffee that was just programmed.
The same operation can be repeated for the "Lungo size" button.

Jun 15, 2015 | Gaggia Brera Coffee Maker

3 Answers

Tassimo red light stays on ran descaling disc twice


After many months, I solved the problem of the red light staying on the Tassimo Coffee Maker. Use these easy steps.
1. Fill a 2 cup measuring cup with hot water.
2. Mix in descaler.
3. Pour in the empty water tank.
4. Put the yellow cleaning disk in the chamber and close chamber. Put the two cup measuring cup under the spout.
5. Push and hold the brew button for about 3 seconds (until the red and green light flash.
6. Now don't touch the machine. It will do it's thing for about 20 minutes. (Don't be impatient and start to push buttons, just leave it)
7. When it finishes it's cycle. The red light will turn off. Then clean the water tank and put fresh water and run clean water through the brewing cycle 4 times. Your machine is now ready for use.

Sep 23, 2010 | Bosch Tassimo TAS4511UC Coffee Maker

1 Answer

Our Keurig only dispenses a partial cup of coffee. We descaled as recommended and did the paperclip cleaning of the need,es and no improvement. When we press brew, it draws an appropriate amount of water...


Keurig coffee maker dispenses only part of a cup (about 5 ounces) after brewng one cup. Running a second clear cup (w/o K-cup) shows coffee grounds in cup of clear water. the maker will then brew a full cup of coffee. It appears that the top pin is too long and goes into the coffee after it punches through the top of the K-cup. Some of the gorunds appear to get stuck in the top pin.

Nov 10, 2009 | Keurig Platinum B70 Coffee Maker

1 Answer

B100 putting out very little water, reservoir is full


bye descaling product for the coffee maker not vinegar put descaler in machine fill with water start leave it running for 10 seconds close it for 15 minute start it up again repeat untill empty after its empty fill it with water run it untill empty repeat again descaler is acid so you need to rinse very good try it out thanks pierre

Jan 11, 2009 | Keurig B100 Coffee Maker

1 Answer

Saeco Incanto -- no coffee coming out


After I posted this I decided to descale the machine again, even though I'd just done it a couple of weeks ago. After descaling and rinsing I tried running water through the brew group by pressing the pre-ground button, then holding down the big cup button. Still no water, but then I turned the little knob on the coffee dispenser counterclockwise, about half a turn. It worked! I rinsed it well, then made a cup of delicious espresso.

Mar 01, 2008 | Saeco Incanto Classic Espresso Machine

1 Answer

Saeco Royal Digital won't brew coffee


normaly descale it gonna affect the water . in the waste cointainer do you have coffee that goes there i tink the brewer is the problem the pvc thing inside the machine that can be remove .remove check it visualy something blocking it cheers

Jan 11, 2008 | Saeco Royal Professional Espresso Machine

Not finding what you are looking for?
Keurig B60 Coffee Maker Logo

1,832 people viewed this question

Ask a Question

Usually answered in minutes!

Top Keurig Coffee Makers & Espresso Machines Experts

Lisa
Lisa

Level 2 Expert

92 Answers

Jason

Level 2 Expert

211 Answers

Oloyede Monsuru

Level 3 Expert

1417 Answers

Are you a Keurig Coffee Maker and Espresso Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...