Question about Venturer CD2770 CD Shelf System

Open Question

No sound, no display lights--------Venturer 5-CD ultra bass stereo system

When it first cut out, I didn't know what to think. I left it alone for a day, then plug it in and everything seemed to be working just fine. Well the standby lights were on. Then I press power and as I watched it, the light slowly started to dim away,and the only lights you can just barely see are the track numbers, and there was still no sound. Everything else works fine---Play, stop, open/close, all those functions

Posted by on

1 Suggested Answer

  • 98 Answers

SOURCE: Venturer SCD CD 2160 shelf system

you have to replace belt inside the player sometimes this rubber wear out..

Posted on Feb 05, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


1 Points

Related Questions:

3 Answers

How to remove timer

If the unit is controlled by a remote, the symptom you are experiencing could be cause by a function only available on the remote. I discovered this with my Yamaha 5-CD disc changer. However, my unit doesn't have an integrated Stereo. Your unit may mean that the remote handles more features. Search for a button that says MODE or AUX. If you still have the User Manual with the system, check to see what these buttons describe as controlling which features. Check back with me.

Jan 27, 2014 | Venturer Home Stereo AM/FM Cassette 5 CD...

1 Answer


The laser pickup over time becomes weaker until it starts skipping and will not play sound in some cases. Try a cd cleaning kit and follow instructions, if no change unit will need to be replaced.

Aug 16, 2012 | Venturer Home Stereo AM/FM Cassette 5 CD...

1 Answer

If the speakers vibrate especially when the mega bass is on, does that mean that the speakers are blown on my icf-cdk50?

Real low bass is mostly vibration. Anything that has a "mega bass" 'enancement' is cutting corners to make up for bass-reproduction shortcomings. Speakers measuring 2-5/8' have no business reproducing real bass. Blown speakers would be silent. Torn cones from excessive volume might sound like unwanted vibration. Your vibration might be a resonance of the unit's own housing, mounting hardware or something nearby. Try moving it to another location.

These units are not economically repairable. If you like it and you think it's broken you might snag a whole new on on eBay with wise bidding.

May 10, 2011 | Sony ICF-CDK50 Under Counter CD...

1 Answer

I just bought a used Venture 5-disc CD player, and the wires between the box and the speakers are broken, and I want to replace them. How do I do that? Also, I have no directions with it. How can I get...

The only way to replace the wires is to trace them out, or splice them. This will require some disassembly of the unit to replace them, but if enough of the wires are present, you might be able to solder them to other pieces of wire to get it to work.
I tried to find a manual online, but it didn't come up at any of the sites. Your best best would be to contact Venture support, and here is their website:
Good luck, and hope this helps.

Nov 15, 2010 | Venturer Home Stereo AM/FM Cassette 5 CD...

1 Answer

Not good surround sound Is the bose lifestyle 5 support 5.1 surround sound?

The Bose Lifestyle 5 is not a 5.1 surround sound system. It is a 2.1 sound system, meaning it is stereo with a subwoofer/bass unit. Having two speakers that can be angled in different directions, the Bose Lifestyle 5 employs Bose direct/reflecting technology,providing greater audio presence. Still, it is definitely not a surround sound system.

Jan 24, 2010 | Bose LifeStyle 5 Series-III CD Shelf...

1 Answer

Where can I obtain a CD2160 stereo system, either new or used in good condition?

I see you don't read your emails, or you would know that I didn't have a problem with a Durabrand CD2160, but I want to obtain one since they aren't manufactured anymore.

Nov 06, 2009 | Venturer CD-2160 Shelf System

1 Answer

My left speaker to my Sony HCD-GX450 stereo is

Make sure that Loudness switch is turned off & bass is not boasted up. Most cars have small cheap speakers that can't handle the bass. also its better to cut the low frequency from the woofer using a passive or active crossover. Most nowadays head units have got some sort of built in crossover. Refer to your head unit manual.

Sep 20, 2009 | Audio Shelf Systems

1 Answer

Sharp XL-HP505 Not playing CDs

Hi try this.....

Put the system in standby (ie off but plugged in) then whilst pressing down the record button and the X-BASS/DEMO button, press the PRESET DOWN (i.e.left hand one) button until "CLEAR ALL" appears, then power on your system.

This gave me some functionality back i.e. i can play normal wave CD's but not mp3 ones....

Hope this helps

Sep 07, 2008 | Sharp XL-HP505 CD Shelf System

1 Answer

Cd door will not open

same thing happened to me. turn the system off, unplug it. then back on and after you switch to CD mode (for some reason the CD tray will not eject unless in CD mode), once the system tries to lock on to a specific CD tray, hold the eject button down for 5 seconds. that worked for me. may have been dumb luck but can't hurt.

Aug 27, 2008 | Venturer CD2770 CD Shelf System

2 Answers

Venturer SCD CD 2160 shelf system

you have to replace belt inside the player sometimes this rubber wear out..

Feb 05, 2008 | Venturer CD-2160 Shelf System

Not finding what you are looking for?
Venturer CD2770 CD Shelf System Logo

Related Topics:

150 people viewed this question

Ask a Question

Usually answered in minutes!

Top Venturer Audio Shelf Systems Experts

The Knight
The Knight

Level 3 Expert

66499 Answers


Level 3 Expert

4518 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Venturer Audio Shelf System Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides