Question about Viper Remote Start System

1 Answer

Remote start not working

The fuel pump went on my truck. I had it fixed and now my remote start does not work. i did use the remote start before i knew there was anything wrong and it kept tring to start , i got in and disingaged it once i realized it was not starting. what can be done?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 30 Answers

U have to program the alarm again

Posted on Jul 15, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My remote is not working


you may go to shop ignore your prob

Feb 14, 2014 | Audiovox Prestige Remote Start

1 Answer

I have a 1995 chevy K1500 5.7L V8, I started the engine at nine oclock but did not drive it, an hour later I went to leave but my truck would not start, I realized that my fuel pump was not pumping so I...


1) the wires can break for to get electricity. 2) or loose wires or bad contacts 2) injector loose wires or bad contacts, or corroded.
The best way you can use the VOM, for continuity to each wires.
God bless you

Jul 30, 2013 | Chevrolet 1995-1997 Chevy 1500 Truck...

1 Answer

Car cranks but will not start


Most probably its a low fuel pressure related problem.Get the fuel pressure checked.If its low then this is faulty fuel pump and clogged fuel filter issue.the other possibilities are,-----

A car that cranks over but doesn't start, in many cases will be due to a bad fuel pump, a broken timing belt, an inoperative cam sensor or crank sensor. Also this problems are related to faulty spark plug. Check the spark at spark plugs when you start the car. Do you notice any spark. Actually you should see. If in case there is no spark then it's a spark plug problem. Also the coil pack gives power to spark plug. So check the voltage at coil pack. It will show 12 volt.If there is no voltage noticed at coil pack then its faulty coil pack that has to be replaced.If all the possible options checked out ok then check the car starter. The starter gets power from battery to start the care. If the starter is faulty then it will not let the car to start. Also check and confirm that there is fuel in the car. If it very low fuel then in some cases this causes the problem. Also check and confirm that fuel pump is functioning properly and the fuel filter is not clogged. One of the easiest ways to check for a fuel pump related problem is to spray a little starting fluid into the air intake while trying to start the car. If the car starts momentarily, then there's a good chance the fuel pump is not working or the car is out of gas. You can also listen for the fuel pump's humming sound when the key is first turned on. Also if a inoperative fuel pump is suspected, a good technician will always check to verify there is power and ground being supplied to the pump, to eliminate the possibility of a bad relay or electrical issue. Fuel pressure can be checked with a pressure gage and if there is pressure, pulse can be checked at the fuel injectors in several ways including the most common, with the use of noid lights. If the injectors don't have pulse the engine won't start. ---------- This troubleshooting tips will help you to solve the problem.Thanks.Helpmech.

Sep 11, 2010 | Buck Excalibur RS-310-EDP Remote Start...

1 Answer

Avital 4100 remote start in 2000 pathfinder. worked fine. went to dealer for recall of fuel filler tube. while there had new key cut and programmed. the next morning the battery was dead. after jumping the...


if your key has a blue square where the metal meets the plastic on the key, you will need to reprogram the data module used to bypass the theft system, or remove the spare key that is installed and have the dealer reprogram it

Aug 09, 2010 | Nissan Vehicle Security Systems

1 Answer

Viper remote start not working


sounds like you need to double check which wires you have tapped into.

Dec 27, 2009 | Viper 5701 VIPER 5701 2-WAY ALARM w/REMOTE...

3 Answers

6.5 turbo diesel wont start . new fuel pump installed, plenty of fuel to pump, no fuel to injectors. new pmd also installed. checked stop solonoid ok. ecm fuses ok. truck has had a new long block installed...


check the high pressure oil switch next to the glow plug controller. if the switch is bad you will not get any fuel to your injector pump. unplug the molex and jump it out. this will bypass the switch. if it runs, just buy another high pressure oil switch. good luck!

Nov 07, 2009 | Chevrolet 1995-1997 Chevy 1500 Truck...

1 Answer

Alarm wont shut off and lights keep flashing


This can be very simple look for alarm brain and unplug the brain, this vehicle should start. if it doesn't the look for valet switch it usually mounted under dash or on kick panel next to hood lever or close to where clutch pedal will be, Turn Ignition ON and in ON position flip switch the led light should stay on steady then the vehicle will start. If None of this works then you will have to take panel under steering column down and disconnect complete alarm system. Disconnect wires one ar a time and re-join them with the correct ones. It's NOT hard to do, there will be spliced into ignition wires.To do this you should disconnect positive lead on battery pole to stop the annoying noise until you are done. Good luck and contact if you need more help. Thanks for using FIX YA

Mar 24, 2009 | Vehicle Security Systems

1 Answer

Viper remote stopped working 791xv


I have the same remote and it comes disconnected in the battery section from the battery hitting it and then the commands and speaker stop working
as shown here
bf76e1a.jpg

Mar 18, 2009 | Viper 791XV The 791XV is a 2-way Security...

2 Answers

Bulldog Remote Starter On 92 Blazer-Cranks but no fuel pump


I've wired several of these and you have likely hooked up the wires wrong its not giving power to the right wires at the bottom of your steering column...........re check your connections
on your truck there are 3 wires that need power for the starter to work they are the orange,pink and brown
hope this helps!

Dec 30, 2008 | Bulldog Security Bulldog Remote Starter &...

Not finding what you are looking for?
Viper Remote Start System  Logo

Related Topics:

117 people viewed this question

Ask a Question

Usually answered in minutes!

Top Viper Vehicle Security Systems Experts

Larry Spears
Larry Spears

Level 3 Expert

625 Answers

Kirk Augustin
Kirk Augustin

Level 3 Expert

2019 Answers

David Burbee
David Burbee

Level 2 Expert

1868 Answers

Are you a Viper Vehicle Security System Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...