I love my KVM switch, but my audio is only clear on the one computer, when I switch to the other computer the audio is not clear and has an underlying pulsating tone which is not good when doing transcription. Any way to take care of that problem?
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
The GCS632U is just one KVM switch. But if you're going to check it out,
it has actually two separate connections.
It will just switch
once you toggle from one computer to another.
Try to power cycle
the KVM switch.
1. Shut off both computers. 2. Disconnect the
KVM switch from the computers. (make sure that not even a single cable
is connected to the computer, even the audio). 3. Leave it
disconnected for 10 minutes. 4. Reconnect the KVM and boot up the XP
first. 5. Boot up the Vista, try to toggle from one computer to
another. 6. LASTLY, shut off the Vista and see if same problem will
If you get the same problem, then you need to contact
IOGEAR and have them RMA the device. Because this is the first time that
I heard of this problem.
bernice, your pc must have an AUDIO AND VIDEO in. Visit your computer store and ask about this. Starview box only has a scart and audio video out, so you must have an INPUT in your pc. But if your just want to RECORD something coming from the box, you need DIGITAL CAMERA which has an AUDIO VIDEO INPUT and that's where you can record, and then transfer it to your pc.
Do you know which model you have? Most KVM's switch by hitting Scroll-Lock twice kinda fast and then the port# you want to switch to. In your case it would be 1 or 2. If that doesn't work let me know what model you have and I will give you a definate solution