Question about Hotpoint Dryers

Open Question

My Hotpoint Aquarius TL61 tumble drier has stopped working suddenly. We think it is the belt but we don't know how to get it out.

Posted by on

5 Suggested Answers

SOURCE: Squeaking!!!!

depending on the age of the dryer, there is a rear bearing that needs to be replace if its is an older dryer. if its new 10yrs or newer the there is a front bearing support that should be replaced

Posted on Nov 19, 2007

  • 89 Answers

SOURCE: Hotpoint CDT00 Tumble Drier has No Heat

you need to check the heating element also check the front drum supports they ussually wear out causing the tub to rub the element this causes the element to burn into

Posted on Jul 11, 2009

jumptrout51
  • 3361 Answers

SOURCE: need to see how the parts are arranged on the

This view should cover your dryer.

http://www.appliancepartspros.com/partsearch/model.aspx?model_id=219238&diagram_id=21139727#d21139727

Posted on Jan 16, 2010

Testimonial: "excellence just what I NEEDED...thank you for the speedy return of information and help "

marka19
  • 1430 Answers

SOURCE: i need to replace a drive belt on a hotpoint

Try this video different model but similar installation
www.appliancehelponline.com/servicemanual.html

Posted on Feb 26, 2010

  • 13 Answers

SOURCE: my hotpoint aquarius tumble drier is making a very...

This is the plastic "wheel" on the motor that drags the drive belt to spin the dryer. you will need to push back into place with something thin. under the right hand side of the dryer there will be a grill under the motor. look for a black plastic "wheel" and move it away from the casing with something that can fit through the grill.

Posted on Dec 02, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to get the lid of Hotpoint tumble drier Model PCF780


Usually the lids are released by a putty knife in the corners, releasing a catch.

Dec 01, 2013 | YouTube Videos

1 Answer

Hotpoint TVF760 Aquarius + change belt


Hotpoint tumble dryer not turning? How to replace a Hotpoint tumble dryer belt.
This video will show you how to replace a tumble dryer belt in your appliance
Please remember to subscribe to our YouTube channel for all appliance tutorials
a 4 THUMBS rating is appreciated for answering your FREE question. 9 rib stretch tumble dryer drive belt Contitech 144001958 9PHE 1860 How...

Aug 06, 2013 | Dryers

1 Answer

My hotpoint aquarius tumble drier is making a very lound griding sound as it turns. What can it be and can it be repaired by myself? the drier is over 8years old is it time for a new one?


This is the plastic "wheel" on the motor that drags the drive belt to spin the dryer. you will need to push back into place with something thin. under the right hand side of the dryer there will be a grill under the motor. look for a black plastic "wheel" and move it away from the casing with something that can fit through the grill.

May 16, 2010 | Dryers

2 Answers

Tumble dryer drum won't turn


Hotpoint tumble dryer not turning? How to replace a Hotpoint tumble dryer belt.
This video will show you how to replace a tumble dryer belt in your appliance
Please remember to subscribe to our YouTube channel for all appliance tutorials
a 4 THUMBS rating is appreciated for answering your FREE question.

Jul 06, 2009 | Dryers

1 Answer

How do i fit a drive belt on a hotpoint tumble drier


Hi, To fit the belt to your dryer you will need to remove the top of the appliance by removing the screws at the rear. Pull of the timer/control knob. Look inside the top of the t/dryer behind the control panel you will see little plastic stems which are attached to the facia panel. You need to knock these out to remove the facia. Once this is off then you can remove the the top 3 screws and the bottom 3 screws the front panel will now come off for you to place the belt on the drum and over the motor spindle. Becareful as the t/dryer will be very loose and will twist. it is easier to lay the appilance down on its back to stop everything falling about. Now you can put it back together in the reverse order....
Good luck.............

Jan 26, 2009 | Hotpoint Aquarius WMA42 Front Load Washer

1 Answer

Hotpoint Aquarius Tumble Drier


there may be a short somewhere in the circuit, poss with the heater.

Feb 13, 2008 | Dryers

Not finding what you are looking for?
Dryers Logo

Related Topics:

78 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hotpoint Dryers Experts

Gerry Harvey
Gerry Harvey

Level 3 Expert

1456 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Chris Hall
Chris Hall

Level 3 Expert

842 Answers

Are you a Hotpoint Dryer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...