Question about Linksys Wireless-G WPS54G Print Server

2 Answers

Linksys WPSM54G No Device

During the install of this device, I am following the steps outlined in the Quick Install and on the CD. When I get to step 6, select device, no device ever shows up.

All lights on the print server on on. I am trying to set this up with my Checkpoint wireless router. It is connected via the ethernet and the router knows its connected.

Is there another way to configure the setup or am I missing something about the router, or ????

Posted by on

  • keith_fulton Nov 30, 2008

    tried all the troubleshooting steps I could find on the 'net, and this was one of the linksys steps, sent the confounded thing back

  • cmeck123 Jan 10, 2009

    I'm trying this as well and reset didn't help. I get to Step 6 and hit Refresh and it can't find any devices. On my printserver, all lights are green except wireless. What should I try next? My printer is a All-in-one HP 5610v. Thanks.

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Do a reset on the print server. To do this, hold in the reset button on the back, unplug, then plug in and continue to hold for 10 seconds. Your setup should now detect the print server

Posted on Nov 30, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I had the same problem. When the setup could not find the device I simply powered down the wireless print server (unplugged it from the power), waited 3 seconds and powered it back on.

Then I attempted to find the device again in the setup. This time it was found.

Hope this helps.

Posted on Jan 27, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How can I install WPSM54G on a windows 8 PC


It looks that you would like to install drivers for Linksys WPSM54G.
Please write to us with the answer of the following question.
1) Do you have the driver installation disk with you?
2) Did you try to install the driver?
3) Did you get any error while installing it?

Linksys WPSM54G is not compatible with Windows 8. You can check for the compatibility of any device or software from the Windows Compatibility Center. Please refer to the link given below.
http://www.microsoft.com/en-us/windows/compatibility/win8/CompatCenter/ProductViewerWithDefaultFilters?TempOsid=win8&Locale=en-us&TextSearch=Linksys%2BWPSM54G&Type=Both&CurrentPage=0&TotalPages=1&ShowCriteria=0&SortCriteria=Relevance&Compatibility=Unknown&LastRequested=14
In Windows 8 you can install software in compatibility mode with previous version of Windows. Please refer to the steps given in the link below under the section "Apply a compatibility mode"
http://windows.microsoft.com/en-IN/windows-8/get-apps-devices-working

I hope your issue gets resolved by now, please write if you still face any issue.

Sep 15, 2013 | Linksys WPSM54G Print Server

1 Answer

Trying to install wpsm54G and I'm stuck on step J. Unable to find printserver.


Hi could you tell what is the main Router it should be compatible with your main router to get the IP address then you can install and share the printer over the network should you need any help please contact me on my website http://computernetworksupportindubai.com/

Jul 22, 2011 | Linksys WPSM54G Print Server

1 Answer

I HAVE PURCHASED A SECONDHAND EPSONCX5500.THEY HAVE LOST THE INSTALLATION CD.CAN YOU HELP? I NEED TO USE THE SCANNING FEATURE


You can obtain the drivers present in that cd from the following link.

http://download.ebz.epson.net/dsc/du/02/DriverDownloadInfo.do?LG2=EN&CN2=SG&CTI=4&PRN=Stylus%20CX5500&OSC=WS

Click on accept to start the download.

After download install the drivers and restart your computer for the changes to take place.

Jun 07, 2010 | Linksys WPSM54G Print Server

1 Answer

I am trying to install a wpsm54g v1.1 print server. All goes well until step 14 and I get a "Connect Fail" error message. Both my husband and I have tried this several times and we keep getting the error...


try this, you need to turn OFF DHCP, START>>RUN>>services,msc press enter. Now scroll down until you see DHCP, Disable it, and set to OFF & Stop it, reboot. You see ths Printer will hand out address, at the moment BOTH are, and they are getting mixed up. Also ensure you are doing everything as Administrator.

Feb 22, 2010 | Linksys WPSM54G Print Server

1 Answer

I CAN'T GET IT TO CONNECT WHEN I WAS SETTING IT UP.


Are you trying to install the router.
You can do it manually without the CD.
MAke sure that your computer is able to go online through the modem.
If your computer is able to go online through the modem
Then you need to connect the computer to the router ad the modem to the router.
open the set up page of the router and change the settings of the router according to the ISP.
Click Here for step by step by instructions

Jan 11, 2010 | Linksys WPSM54G Print Server

1 Answer

How to add my new laptop w/vista to the print server


Visit: http://www.linksysbycisco.com/US/en/support/WPSM54G/download to download the software called (driver) and install it using the Quick Installation right below it.

Aug 16, 2009 | D-Link DPR1260 Rangebooster G...

1 Answer

Cannot see WPSM54G wireless router after configuring it correctly.


It's pretty sad. This device doesn't support Mac and apparently it doesn't support Windows either! I expect a lot more from Linksys. It seems like this is a common problem yet they offer no clear solution on their web site. Do you think maybe Linksys is going out of business and isn't going to support their products anymore?

Apr 13, 2009 | Linksys WPSM54G Print Server

1 Answer

WPSM54G Root Hub Issue


Hi There.

For Windows XP, the filename is lknuhub_xp and for Vista, the filename is lknuhub_vista. Usually, they will send it in zip format and you will have to extract it then specify the file once you install the print server.

Jul 27, 2008 | Linksys WPSM54G Print Server

2 Answers

Installation wizard does not locate the WPSM54G


hello!

what is the model number of your printer? if your setup cd is not detecting your printserver, try the ff:

-- while pc and printserver connected to the router and your printserver connected to your printer. try to reset the printserver for 30sec. Is it printing? If yes, do you see any IP address on the print out

-- If no, unplug the power for 5 seconds and plug the power back in of the printserver then try again to run the setup cd. you may also check your routers dhcp server table if its detecting the printserver

-- if printserver still not detected ty to connect printserver directly to your computer

-- search if you have bi admin utility on your setup cd and install it on your pc

-- manually assign static ip address on the printserver using the bi admin utility and on the pc

-- if successful, connect printserver and pc back to the router and check if you can ping the ip address of your printserver

May 01, 2008 | Linksys WPSM54G Print Server

Not finding what you are looking for?
Linksys Wireless-G WPS54G Print Server Logo

Related Topics:

820 people viewed this question

Ask a Question

Usually answered in minutes!

Top Linksys Print Servers Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18299 Answers

Jesus  Colon
Jesus Colon

Level 1 Expert

12 Answers

Starnley Johnwells
Starnley Johnwells

Level 3 Expert

1029 Answers

Are you a Linksys Print Server Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...