Question about Hitachi 46BX01B 46" Rear Projection Television

1 Answer

Hitachi 50ux14b My tv has sound but no picture. The menus show up on the screen but no picture from any of the inputs. Every once in a while it would work for a few seconds but not anymore. After reading some of the problems others have reported I think the HOT is bad, my conclusion to this is mearly because it appears as if it should be warm or even hot during operation and its cold, even after hours of listening to my set. My question is could there be a power imput issue? it appears as if it gets its power from the circut board. Any help would be greatly appreciated. thank you.

Posted by on

  • kenmarsil Jan 19, 2008

    Picture flickers constantly as if horizontal hold is not set correctly. Began about 6 months ago now and then, but now occurs all the time. I know nothing about TV's so if you could use some laymans language I would appreciate it.

  • vessel Jun 07, 2008

    where is the m-301 located

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,153 Answers

You can try to change C621 first and if this doesn't do it, then M-301 is defective.

Posted on Sep 24, 2007

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My panasonic plasma TV screen will light up, but no picture shows.


Have you tried replacing the cable? They can cause all sorts of trouble.

Oct 19, 2015 | Panasonic VIERA TC-P50U50 50-Inch 1080p...

1 Answer

Coby 40 LCD TV has splash screen and sound, but no picture


Looks like you might have issues with your screen it self the lights and all internal issues. You might have to take into a repair shop to get it done, a fuse might have been blown up. If you have warranty try to take it in and get it fixed.

Nov 05, 2013 | Coby 40 TFTV4028 LCD TV

1 Answer

How to reset toshiba 167 after replacing developer


If your menus are working, it sounds like your input board is not functioning.
As the menus work, you might try using the reset command.
It is on the System Status/System information menu. You have to toggle to it once the menu shows you the firmware version on the Tv.
Might reset the board and get the inputs working again.
Best of luck with what will likely be your last toshiba product (I know mine will be the last item with a Toshiba name on it in my house).

Sep 02, 2013 | Office Equipment & Supplies

1 Answer

My screen is green and does not show a picture or sound! You cannot change the channel or access the menu! Is it the picture tube or lamp?


Can you see menus if you press the menu button? You could be set to the wrong input that doesn't have a signal coming in. I have one TV that shows a blank blue screen when I'm on an input that has no signal. If there is not a signal on the input being used you will also not have sound.

Mar 21, 2011 | JVC Televison & Video

1 Answer

The onboard TV guide works perfectly, but inputs are green


Problem solved. Not sure how. The TV has just been moved in, and after hours of rest and being reset a few times the problem went away.

May 19, 2009 | Samsung HLR5667W 56" Rear Projection HDTV

1 Answer

Picture goes bad when playing Verizon Fios DVR or On Demand


I had issues when I set an SD override for the box, it would sometimes display as bad input when switching to HD content(as well as display all menus in SD even with HD mode in settings.) Turning that off in settings (also turned off "modes" which has no description) stopped it and gave me guide/menus in HD.

Apr 04, 2009 | Sharp Televison & Video

2 Answers

Pioneer 501-HD 53 Rear Projection TV- No Picture or Sound


your input board might be bad, does it work on any other inputs?

Oct 11, 2008 | Pioneer PRO-510HD 53" Rear Projection...

2 Answers

RCA F32665 Shows only gray screen, sound works.


You have a problem in the video circuit. Any video that comes into the set is not getting to the picture tube. The menus come from the system control microprocessor. This shows that the input at the picture tube itself is working. Also you system control is working. The signal would have to be traced through the set to find out where the loss is originating. Stargazer

Jun 14, 2007 | RCA F32665 32" TV

Not finding what you are looking for?
Hitachi 46BX01B 46" Rear Projection Television Logo

Related Topics:

84 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hitachi Televison & Video Experts

Jaime Hernandez

Level 3 Expert

2337 Answers

The Knight
The Knight

Level 3 Expert

76016 Answers

Steve Allison
Steve Allison

Level 3 Expert

5569 Answers

Are you a Hitachi Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...