Question about GE Profile Spectra JGB910 Gas Kitchen Range
Puzzeled, usually when there is a stuck or shorted keypad there will be an error code. First let's see if we can tell if we are in Centigrade or Ferenhiet. Press the bake and broil button together for 2 or 3 seconds. SF should appear in the display. Press the broil pad again and C or F will be displayed. Toggle to F and press start. See if that was the problem. If not try to increase the speed of the + and - keypads. Press bake and broil together for 2 seconds until SF displays. Press the + keypad increase the speed of the control. It should toggle from 1 to 5, 5 being the fastest. Press start and see if that works. If niether works..then have someone remove the keypad ribbon cable from the control board and clean the ends with an eraser. See if that solves the issue...Catriver..post back and let me know.
Posted on May 12, 2007
SOURCE: electronic control pad
if you are handy enough you can replace the switches or make ur own, if the range is under warranty i covers everything except a sledge hammer to the control knobs :)
Posted on Jun 13, 2008
Tips for a great answer:
Feb 12, 2011 | GE J2S968SHSS Dual Fuel (Electric and Gas)...
Feb 11, 2011 | GE Profile Spectra JGBP90 Gas Kitchen...
Nov 19, 2009 | Kitchen Ranges
Oct 26, 2009 | Jenn-Air JGS8860BDP Stainless Steel Gas...
Apr 12, 2009 | GE Profile Spectra JGBP90 Gas Kitchen...
Feb 08, 2009 | Maytag MGS5770 Gas Kitchen Range
Nov 22, 2007 | GE Profile Spectra JGBP90 Gas Kitchen...
Nov 20, 2007 | Maytag MER5775Q Electric Kitchen Range
May 12, 2007 | GE Profile Spectra JGBP90 Gas Kitchen...
18 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: