Question about Computers & Internet

Open Question

Computer/ printer Can I set w/less pc when turned on to connect automaticly to printer also w/less? Brother DCP585CW Printer. Toshiba satellite 300 pc.

Posted by on

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Dcp 195c installer

Make sure your laptop in powered on, power on the printer , connect the printer cable to the laptop, the laptop will try to look for drivers , if the laptop doesn't find the drivers , insert the CD that came with the printer , then try the process again.

If you dont have the CD , look for the drivers o n their website

Aug 13, 2013 | Toshiba Computers & Internet

1 Answer

How to get my laptop to send items to printer

connect your printer and install driver of your printer if it is not automatically detected.

Dec 22, 2012 | Toshiba Satellite A665-S6086 Laptop

1 Answer

Cannot get wireless connection to printer

Print a configuration page from the printer and get the ip address of it. Make sure you can ping the printer. Open a command prompt and type ping <ip of printer> and see if you get a reply. If you get a reply go to the printer properties on your computer and make sure the port is set to the ip of the printer. If it isn't create a new Standart TCP/IP Port and type in the ip address. Leave the port name alone.

Oct 21, 2012 | Toshiba Satellite Pro A200-EZ2204X...

1 Answer

I have a toshiba notebook. how do I set it up to my printer

you will need to connect the Netbook to printer using either USB or Wireless(if this feature is available in your printer).... most printers these days can be connected using USB cable.. after connecting you will need to install printer drivers on your netbook... and after installing drivers your netbook will detect your printer and you are ready to go!

Apr 10, 2011 | Toshiba Satellite Pro L300 Notebook

1 Answer

My Toshiba Satellite Pro U400 has stopped connecting to the internet. Connectivity docotr says IP address needs to be set/was not set properly. Not my internet connection because other computer in the...

Your Toshiba Satellite Pro might be using a specified IP address. Try to set it to obtain an IP automatically. Depending on the Windows OS, whether it is XP, Vista or Windows 7, go to your Control Panel then Network connections or Network Sharing Center and double click on the Local Area Network connection (if your are using wired) or Wireless Connection. Look for the TCP/IP protocol and make sure it is enabled as "Obtain IP address Automatically" and "Obtain DNS addresses automatically". Then click OK to save settings.

Should you need further assistance, please let me know. Thank you for using FixYa.

Jan 31, 2011 | Toshiba Satellite Pro U400-S1001V Notebook...

2 Answers

I have a Toshiba A105-S4364 laptop that will not connect to my new Epson wireless computer. The laptop sees the printer but refuses to print. Do you have any suggestions?

check see if File and printer sharing is turned on
Windows 7
START>Control panel>(click on view to small items view)Network sharing centre>in the top left corner you will see an option CHANGE ADVANCE SHARING SETTINGS>in the list you will see TURN ON FILE AND PRINTER SETTINGS


Nov 09, 2009 | Toshiba Satellite A105-S4364...

1 Answer

Toshiba satellite E100ยป laptop and HP laserjet 3030 printer

Check the HP website and see if there are Vista drivers for your model. If you installed them from the disk they're likely not compatible.

Apr 27, 2009 | Toshiba Computers & Internet

1 Answer

Factory default settings for Toshiba L300 series

if its a USB connected printer, unistall any software, then do not plug in the USB cord until the setup software ask you to try that before restoring

Mar 29, 2009 | Toshiba Satellite Pro L300 Notebook

1 Answer

Printer hook up

With most printer setups - you will need a bi-directional cable (the one with the ends that are rectangular and have several "pins" with clips to secure one side to the printer and the other to the computer) - most default setups will run through LPT 1 (the port) through the auto setup wizard in windows (windows should also automatically recognize the drivers for installation). You should be able to connect one end of the cable to the printer, the other end to the back of the computer (the only connection that fits) and windows should guide you the rest of the way.

Feb 01, 2009 | Toshiba Satellite M35X-S163 Notebook

1 Answer

How to turn on toshiba satellite M300 laptop from hibernating mode

hi shirleygty, is that automatic hibernation (the computer hibernates by itself) or manual hibernation (by pressing the hibernate button)? If either applies to your case you might need to update the BIOS information for your computer to fix the power management issues on it. You can get it here. Just run the file, click install & choose Install From Windows. Make sure you don't have any BIOS password or any external devices connected to the computer. When the update completed successfully, your computer will automatically restart, then try hibernating this time (manual or automatic). I do recommend setting the hibernation to 1min. at the control panel > power options > change when to turn off the display. When it hibernates, pressing any keys or the power button should wake up the computer.

Hope this helps.

Oct 05, 2008 | Toshiba Satellite A205-S4617 Notebook

Not finding what you are looking for?

Open Questions:

Computers & Internet Logo

Related Topics:

30 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computers & Internet Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers


Level 3 Expert

101466 Answers

David Payne
David Payne

Level 3 Expert

14160 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides