Question about Fax Machines

1 Answer

Images are faintly repeated about 3 inches apart on copy. also copies are smeared and dusted down the page. this is referring to a laser fax machine, Canon. gerald p.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 120 Answers

It need a new drum. Lawrence

Posted on Nov 11, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a MFC7860DW, How do I set it to collate copies?


You can download the manual from here: Reference page 24: "Collate With the Collate check box selected, one complete copy of your document will be printed and then repeated for the number of copies you selected. If the Collate check box is not selected, then each page will be printed for all the copies selected before the next page of the document is printed."

Mar 02, 2015 | Brother MFC-7860DW Compact Wireless...

1 Answer

Have a HP640 fax machine that I use only for copying, had no problem with it when it just started to give me a blank page when I copy. It will scan the page but only prints a blank copy in return. I have...


If it's a laser copy type (not good with names) the lasers might be covered with dust and dirt, or you might need to replace the copying arm thing.. that's if you have a similar one to mine

Oct 15, 2014 | Fax Machines

1 Answer

I have lost instruction manual. How do I 'copy' on a canon FAX-L120


1-Load the document face up in the ADF/Tray
2-Enter the copy mode by pressing Copy Button
3-Enter Quality
4-Press Start
creativetech_34.jpg

For any further information/ clarification please refer to Chapter 6, Page 80 & 81 for the Canon i-SENSYS FAX-L120 Manual.
Save the Manual for Future reference


Hope it helps! Good Luck!
CreativeTECH

Mar 11, 2011 | Canon i-SENSYS FAX-L120 Plain Paper Laser...

1 Answer

My 4100 has had the drum and toner installed new, when i copy or recieve a fax it blank/very faint. can you help?


When you remove the toner and drum unit out of the machine look inside where it was, look up inside that spot where the drum was and you will see a glass window that is about 3/8 of an inch deep and maybe 8 to 9 inches long, it is likely a film of toner is on that glass blocking the laser light from hitting the drum properly. Just use a dry lint free cloth and wipe that glass down and you should be good to go. Remember look up in the spot where the toner was it can be easy to miss it.

Feb 09, 2010 | Brother IntelliFAX 4100 Laser Fax

1 Answer

Replaced the power supply/controller pca on a ricoh 2210l. prints fine, but copies come out black. adjust shading procedure yields copy with vertical black stripes and sometimes a faint negative image of...


Hi,

If the tonner has gone old please take it out and shake if for atleast 2 to 3 minutes before putting it back and takng printouts. The issue would resolve but its a temporariy fix as you would require to change the tonner .

Let us know if you need further clarification.

Thanks

Dec 30, 2009 | Ricoh FAX2210L Plain Paper Laser

1 Answer

Our canon laser fax 1060p receives faxes fine but send out a total black page (also the copy function is a total black page)


No power/failed contact image sensor. If under contract get replaced. It is poss. that a "standard white setting adj." could fix it, but doubtful with a black copy. -Carl

Jul 17, 2009 | Canon L220 Plain Paper Laser Fax

2 Answers

Bad print with repeated text on fax or copies


Make a copy and shut the power off or open a door when the paper is 1/2 way into the machine. You are just basically going to have to try to time it. When you hear paper being fed into your machine (the blank paper from the tray) count about 3-5 seconds and then open a door on the machine or shut the power off. IF you have timed it correctly, the paper should be 1/4 - 1/2 way through the machine. Remove the jammed paper **** But be careful..... The toner is NOT FUSED at this point so it will rub off if you brush it up against your clothes or hands. If the image is doubled at this point.. then its the drum unit. If the image is good at this point, then it is probably your fuser.
Hope this helps.
Good luck.
Mac =)

Apr 02, 2008 | Brother IntelliFAX 2800 Laser Fax

2 Answers

Double shadow image


YOU NEED TO CLEAN THE LASER UNIT happy faxing omnipresent

Oct 01, 2007 | Canon FAXPHONE L170 Plain Paper Laser

Not finding what you are looking for?
Fax Machines Logo

Related Topics:

37 people viewed this question

Ask a Question

Usually answered in minutes!

Top Fax Machines Experts

CheckitRight
CheckitRight

Level 3 Expert

1349 Answers

Soulvisitor
Soulvisitor

Level 3 Expert

1113 Answers

Norman  J Weimar Jr
Norman J Weimar Jr

Level 3 Expert

5695 Answers

Are you a Fax Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...