Question about Microsoft Troubleshooting Your Web Page (0-7356-1164-5) for PC

I bought my Sanyo camera, 6.0 megapixel, about a year ago and now when I try to zoom in it says "Lens error 2111" and turns off my camera.

The lens won't go in even when I turn it off.

It goes in about halfway.

Try to find the reset function in the menu. Or bring it back to the "default" or factory settings. Also check if the date is correct.

Posted on Nov 11, 2008

let c = cory's age now
let s = her sisters age now

cory's age now = sisters age + 6 years

=> c = s + 6

4 years ago, cory was 4 years younger ( i.e. c-4) and her sister was 4 years younger (s- 4)

4 years ago cory was 4 times older than her sister

=> c - 4 = 4*(s-4)

We can simplify this to c = 4s - 16 +4 c = 4s - 12

We can then use simultaneous equations to solve the two equations

(i) c = s + 6 (ii) c = 4s - 12

If we multiply both sides of equation (i) by 4 we get (iii) 4c = 4s + 24

We can then subtract equation (ii) from equation (iii) to eliminate the '4s' term => ( 4c = 4s + 24 ) - (c = 4s - 12) => 4c - c = 4s +24 - 4s +12 => 3c = 4s - 4s +36 => 3c = 36 => c = 36/3 => c = 12 => Cory's age now = 12

__For clarity:__
Her sister's age now is of course 6
4 years ago Cory would of been 8 and her sister would of been 2

I hope this helps and good luck! If you have more questions - ask away!

Please take the time to rate this answer

Many Thanks Don.

cory's age now = sisters age + 6 years

=> c = s + 6

4 years ago, cory was 4 years younger ( i.e. c-4) and her sister was 4 years younger (s- 4)

4 years ago cory was 4 times older than her sister

=> c - 4 = 4*(s-4)

We can simplify this to c = 4s - 16 +4 c = 4s - 12

We can then use simultaneous equations to solve the two equations

(i) c = s + 6 (ii) c = 4s - 12

If we multiply both sides of equation (i) by 4 we get (iii) 4c = 4s + 24

We can then subtract equation (ii) from equation (iii) to eliminate the '4s' term => ( 4c = 4s + 24 ) - (c = 4s - 12) => 4c - c = 4s +24 - 4s +12 => 3c = 4s - 4s +36 => 3c = 36 => c = 36/3 => c = 12 => Cory's age now = 12

I hope this helps and good luck! If you have more questions - ask away!

Please take the time to rate this answer

Many Thanks Don.

Sep 13, 2011 | Sunburst My Mathematical Life Single...

what is the problem, please explain in greater detail what the error is

Mar 12, 2011 | The Learning Company Learn to Speak...

Allan is 19 and Roy is 13.

Solution:

First we have 2 variables, their ages: I used Allan = x & Roy = y

Equation 1: X - 4 = 2*(Y-4) - 3

We can ignore the 5 years in the second part of the statement. Allan will always be 6 years older than Roy whether it be 5 years from now or ten years form now.

Equation 2: X = Y + 6

Substitute Y + 6 for X in equation 1:

X - 4 = 2*(Y-4) - 3 becomes Y + 6 - 4 = 2*(Y-4) - 3

That simplifies to Y + 2 = 2Y - 8 - 3

Rewrite it again: Y + 2 = 2Y - 11

Add 11 to both sides: Y + 13 = 2Y

Subtract Y from both sides: 13 = Y

Now plug 13 in for y in Equation 2

X = Y + 6

X = 13 + 6

X = 19

Solution:

First we have 2 variables, their ages: I used Allan = x & Roy = y

Equation 1: X - 4 = 2*(Y-4) - 3

We can ignore the 5 years in the second part of the statement. Allan will always be 6 years older than Roy whether it be 5 years from now or ten years form now.

Equation 2: X = Y + 6

Substitute Y + 6 for X in equation 1:

X - 4 = 2*(Y-4) - 3 becomes Y + 6 - 4 = 2*(Y-4) - 3

That simplifies to Y + 2 = 2Y - 8 - 3

Rewrite it again: Y + 2 = 2Y - 11

Add 11 to both sides: Y + 13 = 2Y

Subtract Y from both sides: 13 = Y

Now plug 13 in for y in Equation 2

X = Y + 6

X = 13 + 6

X = 19

Oct 08, 2009 | Vivendi Math Blaster Algebra (03763) for...

Hello, I give advise & support on using a computer. If you need basic computer skills and advise, I will help you. You can get support from me, via Msn live chat, if you purchase a $4 one hour online session. If you want to find out more, please send an email to shane213@live.com

Sep 18, 2009 | Simon & Schuster Writing Tutor with Typing...

Hello

The problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the probability is that you will have to get it fixed by a professional.

Use these at own risk as it may further damage the camera.

Firstly , try connecting your ac adapter or usb cable.

Try holding the shutter button while switching on the camera.

Look at the lens , and if some of the lens 'circles' is misaligned or not concentric then try wiggling it (while holding camera lens down).

Try gently pushing or pulling the lens when it extends but this is risky as it may cause the lens barrel to slip out of its guidance system.

Another way to do this is to place the camera lens down on a hard surface and then power it up. Be sure to use a soft cloth or something similar as to not scratch your lens or casing. Let the lens push the camera up and down a few times and sometimes the little resistance provided by the camera is enough to get things going again.

Try hitting your camera near the lens on the body with the soft tissue on the palm of your hand.

Other than that , I would take the camera to a repair center for a evaluation to see if it would cost more to repair than to replace the camera.

If it is still under warranty I would suggest you take it in before trying any of these steps and remove any off-brand batteries or accessories as some stores are really fussy about warranty repairs on camera's with non-brand accessories.

You can also have a look at THIS link.

Hope the advise is useful. please do not hesitate to let me know if you need any further assistance.

Regards

Andrea

The problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the probability is that you will have to get it fixed by a professional.

Use these at own risk as it may further damage the camera.

Firstly , try connecting your ac adapter or usb cable.

Try holding the shutter button while switching on the camera.

Look at the lens , and if some of the lens 'circles' is misaligned or not concentric then try wiggling it (while holding camera lens down).

Try gently pushing or pulling the lens when it extends but this is risky as it may cause the lens barrel to slip out of its guidance system.

Another way to do this is to place the camera lens down on a hard surface and then power it up. Be sure to use a soft cloth or something similar as to not scratch your lens or casing. Let the lens push the camera up and down a few times and sometimes the little resistance provided by the camera is enough to get things going again.

Try hitting your camera near the lens on the body with the soft tissue on the palm of your hand.

Other than that , I would take the camera to a repair center for a evaluation to see if it would cost more to repair than to replace the camera.

If it is still under warranty I would suggest you take it in before trying any of these steps and remove any off-brand batteries or accessories as some stores are really fussy about warranty repairs on camera's with non-brand accessories.

You can also have a look at THIS link.

Hope the advise is useful. please do not hesitate to let me know if you need any further assistance.

Regards

Andrea

Jul 13, 2009 | Microsoft Troubleshooting Your Web Page...

1. Make sure the CD-ROM is clean & does not have scratches.

2. Try cleaning the lens of your CD-ROM drive using a lens cleaning kit.

3. Try reading the CD-ROM on another CD-ROM drive.

2. Try cleaning the lens of your CD-ROM drive using a lens cleaning kit.

3. Try reading the CD-ROM on another CD-ROM drive.

Jul 12, 2009 | Macromedia Educational & Reference...

sometimes, this is happens when your cd drive has a weak lens or the disc you are using is faulty....

check the disc..... try to create an image of the disc using another powerful writer .... if the image creation is successful, then use the image by mounting on your machine instead of the disc....

check the disc..... try to create an image of the disc using another powerful writer .... if the image creation is successful, then use the image by mounting on your machine instead of the disc....

May 27, 2009 | The Learning Company Learn to Speak...

If you can't get it to go using the instructions from this page let me know

http://www.microsoft.com/windowsxp/using/helpandsupport/learnmore/appcompat.mspx

Robert

http://www.microsoft.com/windowsxp/using/helpandsupport/learnmore/appcompat.mspx

Robert

Jan 19, 2009 | Dk Multimedia I Love Math - 2nd (2071074)...

You can get a replacement registration number online at:

http://www.harmonicvision.com/techsupport/replaceReg/regno.htm

Or you can call 800-474-0903.

http://www.harmonicvision.com/techsupport/replaceReg/regno.htm

Or you can call 800-474-0903.

Nov 26, 2008 | Harmonic Vision Music Ace 2 for PC, Mac

unfortunately there is no way around it as the software is not compatible with vista and wasn't designed for vista, i had a similar old software installed fine with vista but this is not true for most of them

sorry

sorry

Apr 14, 2008 | The Learning Company Learn to Speak German...

400 people viewed this question

Usually answered in minutes!

Thank you, but it still isn't working.

I tried to reset it and check the date and the lens isn't going in

×