Question about Optoma MovieTime DV10 Multimedia Projector

Open Question

DV10 Colour wheel / color wheel

Hello, I have a DV10, I have carefully opened it, it was making a loud noise and the colours were washed out.

I can now see the colour wheel has lost half its segments! I have removed the colour wheel and the cable its attached to, part number 23.81R19G001A5312556 and it says KYO Sony Chemicals Corp etc.

Could you please tell me who in the UK can supply me with a replacement colour wheel, please? I understand that Optoma in Watford do not supply parts-only and only do a complete parts & fitting service.

Thank you.

Posted by on

5 Suggested Answers

  • 8 Answers

SOURCE: DV10 Color Wheel Replacement

Hello, the information is as follows:


Part no: 70.18r26g01
Cost: 129.00 + shipping
Model :Optoma DV-10
Contact no: (408) 383-3710
You may also contact the "out of warranty" repair department at 888.942.2929.

Glad to help.

Posted on Aug 25, 2008

  • 8 Answers

SOURCE: Color Wheel Replacement for Optoma DV10 Projector

I already posted an answer to your request.

Posted on Aug 25, 2008

  • 8 Answers

SOURCE: optoma dv10 color wheel

Sure! I already answered your request, but here goes.

Part Number : 70.81r26gr01
Cost :$129.00 + Shipping
Part : Optoma DV-10 color wheel replacement
Shipping is around $18.00 Ground, $35.00 2- day, $55.00 overnight.

Tel no. :408.383.3710
You may also contact the "out of warranty" repair department at 888.942.2929.


This information was current as of posting date.

Posted on Aug 25, 2008

  • 5 Answers

SOURCE: Optoma DV10 MovieTime Color Wheel replacement

Theres a guide on this on one of the home movie theatre forums and also some colorwheel guide on brit ebay but no color wheel supply that i know of.

Posted on Nov 11, 2008

  • 2 Answers

SOURCE: Optoma DV10 color wheel

Okay, I recently had a loud noise coming from my projector and found online meterial stating that the colour wheel had been damaged. So with a bit of guts I managed to open the projector and found the colour wheel missing a segment.

I removed the colour wheel and the broken piece of the segement and tried to contact Optoma. Optoma turned round and said they cannot sell me the the colour wheel, which got me very upset. Some people claim online that Optoma will sell you the part on a back order at £50. (if you can be a little specific on how you managed to convince them to sell you the part, would be great).

The only option I had available was to send my project to them and they would repair for an estimated cost of £125+VAT. Guess what, you can buy the entire projector off ebay for 150quid!!!

Anyways after fiddling around quite a big online I got fedup and decided to glue the broken segment together and it SOLVED the loud vibration problem. I have colour and picture.

Becareful not to tighten the colour wheel screw too tight orelse it will break another piece of segement (Like I did).

Here are instructions on how to open up the projector.

http://www.geekfest.info/DV10/dv10.html

I cannot guarantee this will work for you as it depends on how badly you have shattered the colour wheel segment, so do at your own risk. I had two piece of the segment broken and a third by tightening the colour wheel screw too tight.

This will work for awhile but the colour wheel does need replaceing one day. If anyone can tell me how you can get Optoma to sell you the colour wheel would be great.

Best of Luck

Posted on Feb 06, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I replaced the K cartridge and i get this caution. I-Unit End Replace K


If "[Color name] Toner Empty. Replace with a new toner cartridge." is displayed and printing stops, replace with a new toner cartridge.
([Color name] indicates one of the following: C or Cyan, M or Magenta, Y or Yellow, K or Black.)

Jan 10, 2017 | The Office Equipment & Supplies

2 Answers

How do I replace the pf kit on a brother mfc-9325cw. I have the replacement parts.


Laura, you get the necessary tools, get access and remove the old parts and replace with new ones. Make sense?

Jan 10, 2017 | Brother International Brother MFC-9325CW...

1 Answer

How to resolve colour misalignment in ricoh c4000 prints


get to the device manager and do an alignment for the printer

Jan 09, 2017 | Ricoh Office Equipment & Supplies

1 Answer

My sharp color copier Mx 3100n is indicating F2-73 after using 88-1 how do I restore it


Hello Tijjani,
The error code that you are experiencing is as follows;
F2 73 IMPROPER TONER CARTRIDGE DETECTION (YELLOW)
You need to replace the yellow cartridge with the proper part # Item Number: MX 31NTYA, MX31NTYA.

Good Luck!
Rich Lilja

Jan 08, 2017 | SHARP MX-3100N

1 Answer

B&w/gray Scanning Is Okay But Color Scanning Problem


Run ink head cleaner routine. If you cannot the list make and model of printer. Thanks.

Dec 25, 2014 | Office Equipment & Supplies

1 Answer

Colour cyan not printing


Did all of the packaging come off the toner successfullywhen first installing. Can you see cyan toner on the transfer roller? (Black roller on actusl cartridge)?

Dec 08, 2013 | Office Equipment & Supplies

1 Answer

How to clean ink absorber for canon mp237


First of all open the ink cartridge of your printer.
When the ink cartridge would move all the way over, then disconnect the power cord of your printer.
Now pull the frame of rubber from the printer and remove ink pads.
To clean ink pads you may place them in a bowl having warm water and start rubbing and squeezing them to clean it from ink.
After removal of ink, keep the pads separate for dry.
When the pads get dry completely, place them back in rubber frame.
Reinstall the rubber frame in your printer.
For deep guide and support refer to-
Canon Pixma Mp237 Manual

Oct 07, 2013 | Canon PIXMA MP230 Multifunction color...

1 Answer

Laser printer makes light clicking noise when idle


When idle is potentially the fuser unit, after heating and cooling. However the print quality issue associated with the clicking sound could indicate an electrical issue. The HVPS maybe faulty causing the print quality issue (due to dependant parts) and the electrical click. In any case I would recommend calling Brother and finding the nearest authorised service agent.

Oct 20, 2012 | Brother Mfc-9840cdw All-in-one Laser...

2 Answers

Just bought and tried to load my Swingline Smart Touch low force stapler. Don't know how to get it opened


I have one of these models. Just push the gray lock mechanism at the end of the stapler and the loading magazine will pop out. The chrome plated magazine opens towrds the front....it slides forward and backwards.

Jun 17, 2011 | Office Equipment & Supplies

2 Answers

HP printer psc 2210 all in one


Chances are that you didn't lock down the scanner when you moved the unit. You can attempt to open the unit and move the scanner bar manually to reset it. HPs are very difficult beasts when it comes to their power up check out. It must be fully functional...including all cartridges...to work in most cases. Good luck.

Dec 20, 2007 | Office Equipment & Supplies

Not finding what you are looking for?
Optoma MovieTime DV10 Multimedia Projector Logo

Related Topics:

61 people viewed this question

Ask a Question

Usually answered in minutes!

Top Optoma Office Equipment & Supplies Experts

color wheel light...
color wheel light...

Level 2 Expert

137 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you an Optoma Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...