Question about Sylvania 6626LCT 26 in. LCD Television

2 Answers

Flat panel tv blows fuses

Our tv blew a fuse and went dead. I took the back off and replaced with the same fuse. As soon as I plugged it back in it blew the new fuse.
Thanks for your help.

Posted by on

  • blewmy_fuse Jan 14, 2009

    mine did the same thing, only instead of replacing fuse, i wrapped it in aluminum foil, put it back in, plugged it in, and it popped and flashed.. now i have no power nowhere.. what did i just break?



2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 5 achievements.


    An expert whose answer got voted for 20 times.


    An expert who has answered 20 questions.

  • Expert
  • 30 Answers

Next to the fuse that blows is 4 large black diodesflat panel tv blows fuses - of those is common to short out. the bad one would give you areading of zero ohms when checked with a meter. or just replace all 4.most likely its location D603. hope this helps

Posted on Jul 20, 2009

  • Todd Willingham Jun 14, 2013

    thank you very much this gives me an idea for repair bill some places like to run your bill up love this site thanks a million!!!!


  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • Master
  • 2,326 Answers

If the same fuse blows again as soon as you plug it the LCD to the AC outlet, It means that a transistor(s), capacitor(s) or diode(s) are shorted.
I can repair the power supply for you. Let me know if you need further assistance.

Posted on Nov 10, 2008


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Fixya tv

It sounds that there should be a dead short circuit in the power supply board's circuit. If you are not familiar with electronics, do not attempt to repair. Whether you suffer fatal electric shock. Instead, contact any experienced service technician, or the nearest service center.

Apr 26, 2013 | Samsung Televison & Video

1 Answer

Suddenly blows fuse as soon as plugged in why?

Usually a fuse blowing immediately means there is a short in the amp somewhere.

Jan 04, 2013 | Koss KS2503 System

1 Answer

Watching the TV and heard a "pop", it went dead. Opened up the back and found a blown 4A 125V fuse. Replaced fuse and plugged in TV. Fuse blew instantly when I plugged in the TV. Sylvania...

The power suply unit may be dead......if the fuse blows instantly it means that the main input is short.
possible parts damaged :the diodes from the mains, the power tranzistor and the ic from the primary part and other components around them.
First unplug the tv, unload the mains capacitor (using a light bulb) check all the diodes from the rectifing bridge, check for any shortened semiconductors or blow resistors.


Feb 19, 2011 | Sylvania LC370SL8 37 in. LCD Television

1 Answer

Hi there, I have a Philips Home Theater System that recently went out. I few weeks ago I was playing my ipod through the dock when the sound went out and the system became stuck (none of the controls...

Of course it can be repaired, but not by us and maybe not economically. Take it to a tech.

Try disconnecting the speakers and a new fuse. Maybe it's just a speaker shorted. Low probability.

Jan 09, 2011 | Audio Players & Recorders

1 Answer

I have aVizio VX42L HDTV10A. was watching a show when we heard a loud pop.Then all went dark. Would not turn back on. I took off the back cover and found the ceramic fuse was blown on the board # DPS-283AP...

This means you have a dead short, It is probably a Diode in the power supply area, but without testing board you don't know. If you know basic electronics, i would say check all diodes in power supply and look hard for something burnt and replace that also. Or just replace power board, check

Dec 08, 2010 | Vizio VX42L 42 in. LCD TV

1 Answer

Dead after storm

yes, take the back off, and follow the power cord. You will see a fuse in the board.You have the same problem as I have. I replaced my fuse, and plugged it back in, It made a sizzling sound and blew the fuse again.Maybe you will have better luck, with your set good luck rob

Sep 17, 2008 | RCA F36665 36" TV

1 Answer

Follow up on "no power to my tv"

3d picture ...sounds like to me a convergence amp issue...what type of tv is this?

Dec 01, 2007 | Televison & Video

1 Answer

Tv went dead

This sounds like the small blue capacitor next to the horizontal output transistor shorted and cracked, which blew the B+ fuse. The B+ fuse is the solder-in type which looks like a small resistor and the value of the blue cap is usually 1000pF at 2KV.

May 08, 2007 | Hitachi 50UX58B 50" Rear Projection...

Not finding what you are looking for?
Sylvania 6626LCT 26 in. LCD Television Logo

Related Topics:

1,250 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sylvania Televison & Video Experts

The Knight
The Knight

Level 3 Expert

75025 Answers

matt martin
matt martin

Level 3 Expert

1213 Answers

Computer Repairing
Computer Repairing

Level 3 Expert

14641 Answers

Are you a Sylvania Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides