Question about Sharp 27K-S100 TV

1 Answer

TV will not stay on

I have a Sharp 27K-S100. It was working fine yesterday and this mourning it would not stay on. I have to unplug and replug it in. I hit the power and the TV turns on, I can hear sound, the picture doesnt come on and then it shuts off. And in order to turn on again have to unplug and replug. So if you have a solution please email me. Thank you for your time.

Mark

Posted by on

  • mark_ohara Nov 21, 2008

    Same problem. However, I have a 36" Sharp TV. Around 8 years old.

  • Anonymous Mar 25, 2009

    I am having the same problem with my Sharp TV. Last night it was fine. This morning it would not stay on. I have to unplug and and plug it back in but it goes off again. Sounds to me that Sharp needs to do some recalling on these sets.

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 146 Answers

You have done everything that a consumer can do. The problem is most likly in the horizontal section of the tv. This will be something for a repair shop to fix.

Posted on Nov 10, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a sharp 27K - S100 colour tv...when turned on I'm getting diagonal white lines and a greyish screen... Audio is fine just the visual...what can the problem be??


"Retrace Lines"; is this fault called technically. If you wish to get some details; check the site linked here. Pull up older posts. Surf the site with patience. http://electronicshelponline.blogspot.com/
Cause for retrace lines to CRT based TVs are given in detail at one among the post. Search the site by these keywords.

Feb 23, 2015 | Sharp Televison & Video

1 Answer

Horizontal output number


The generic part number will be printed right on the part, if you cannot locate the part on the board I do not know what to tell you.

Dec 15, 2012 | Sharp 27K-S100 TV

1 Answer

NO volume on our 27k-s100


Its likely Mute or a lockout on the audio, if out see if you have the owner manual and or the remote that came with the set, the item seen on screen is a clue.

Dec 12, 2012 | Sharp 27K-S100 TV

1 Answer

Need a remote control code for a Motorola D800 remote control


0093, 0039, 0165, 0157 one of these should work

Oct 16, 2010 | Sharp 27K-S100 TV

1 Answer

I turn the tv on and after a few seconds it shuts itself back off again. At that point I can't turn it back on until I unplug it and plug it back in. However, when I turn it back on it will again turn...


Possibly the main Power Regulator is damaged!!!

Open the case, then look for anything that burned out, replace it!!!

If still won't start, you need a multimeter, soldering iron, try locate output diode on power regulator board, then measure the voltages, it has 3-4 type of voltages;
first diode it should around 115V-130 V DC.
Second diode it should around 24 V DC.
Third diode it should around 11-16 V DC.
Fourth ( if exist), check diode and should around 5 V DC.

The problems usually start on second diode, if persist, follow the circuit board.

Oct 18, 2009 | Sharp 27K-S100 TV

1 Answer

How to switch to antenna usage without a remote for a sharp model 27K S100


several answers:
1get the original remote control
2get a universal remote control and maybe you can get menu from there.
3get menu on front panel of the tv and search for the option.
4send the tv to autoprogram. Good luck!

Mar 22, 2009 | Sharp 27K-S100 TV

1 Answer

Picture is okay but sound is not coming


sound is not coming but picture is ok in philips 21 RF vardan tv

Mar 17, 2009 | Sharp 27K-S100 TV

1 Answer

Universal remote


The bad thing is that not all universal remotes work for all functions of a tv. The thing is the factory remote. Order one at ROMOTES.COM. They sell them at a good price.

Oct 26, 2008 | Sharp 27K-S100 TV

2 Answers

I am trying to fix a Sharp 27k-s100 television.


Can you use the remote control to change the channels? If not, it may be that to need to reprogram the remote to work with your TV. I just had the same problem. I have GE universal remote and have reprogrammed it to work with my SHARP 27k-s100 TV by following these instructions: http://www.ehow.com/how_9190_program-ge-universal.html The code that worked for my TV is 173. Other codes listed for SHARP are: 004, 006, 012, 029, 095, 111, 112, 113, 122, 171. Good luck!

Sep 11, 2007 | Sharp 27K-S100 TV

Not finding what you are looking for?
Sharp 27K-S100 TV Logo

Related Topics:

205 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sharp Televison & Video Experts

The Knight
The Knight

Level 3 Expert

72620 Answers

Dave Naylor
Dave Naylor

Level 3 Expert

834 Answers

Jaime Hernandez

Level 3 Expert

2296 Answers

Are you a Sharp Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...