Question about Remote Controls

1 Answer

CODE FOR A JUMBO REMOTE

I PURCHASED A JUMBO EMMERSON REMOTE AND DON'T FIND A CODE FOR A DURABRAND TV CAN U HELP

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 7 Answers

Use the process called code search setting it takes a bit of extra time but some codes will work for  equipment that is not listed in the manual. If for some reason this don't work the remote you purchased will not work with that brand but this is very unlikely I believe. That process is  1. Turn on device that you want to set. 2. Aim the remote at device and press and hold down the code search button for at least 3 seconds until the red led lights up solid red. 3. Press the device button for the item you wish to program E.G. tv, dvd, vcr ect. and the led will blink once and then remain solid red. 4. press on/off button on remote slowly and repeatedly until the device you are trying to program shuts off. (Note led will blink once each time you press on/off button) 5. Once this occurs, press enter button to store the code and the led light will shut off.

Posted on Nov 11, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Alba tv code for jumbo universal remote control


0384 0421 0457 0460 0610. Try these codes. If you wish to get more; check the site linked here. It has set-up code list & set-up procedure to many popular brand remote controls. See it in "Mosaic" view. It will make surf easier.
http://electrohelponline.blogspot.com/

Mar 29, 2014 | Innovage Jumbo Remote Control

1 Answer

I need a code for my tv zenith i have a jumbo remote laxmax


Hello
Three digit remote codes for Zenith TV with Innovage Jumbo remote control are:
004 / 005 / 006 / 019 / 196 / 004 / 051 / 083 / 152 / 153 / 154 / 210 / 217
OK.

Jun 20, 2011 | Innovage Jumbo Remote Control

1 Answer

I need remote codes for samsung tv with innovage jumbo remote


Iinnovage Jumbo Remote Control Remote Codes

YOU CAN DOWNLOAD THE DOCUMENTATION FOR THE INNOVAGE REMOTE HERE:

http://www.remotecentral.com/cgi-bin/files/dl.cgi?file=others/innovage/jumbo-manual.zip&area=other


In case of a problem or clarification or my solution was insufficient, don't hesitate to post me a reply.

If you are satisfied, rate my solution with the "thumbs" or (even better) add a testimonial.

Jun 11, 2011 | Samsung Remote Controls

1 Answer

Looking for a jumbo remote that will operate a new 26 inch Vizio Montior. The old one don't work. Is there a new version?


A remote is not designed to control and Moitor. They only run by the video/sound output from the pc. So I am taking it for granted that you meant TV instead of Monitor.

A. Before buying a new remote try replacing the batteries first.

B. I found the Innovage Jumbo Remote Control manual and it has no code for the Vizio TV, you will need to utilize the remote's "Code Search" option.

C. Instructions

1. Turn on the Vizio TV.
2. Aim the Jumbo Universal Remote at the Vizio TV and hold down the "Code Search" button on the remove for roughly 3 to 5 seconds. The LED lights on the Jumbo Universal Remote will come on.
3. Press the "TV" button at the top of the Jumbo Universal Remote.
4. Start pressing the "ON/OFF" button repeatedly until the Vizio TV turns off. This will likely take several minutes due to the amount of available codes.
5. Press "Enter" on the remote immediately after the Vizio TV turns off to save the code.
6. Test the Jumbo Universal Remote by trying to control the Vizio TV with the remote. If the control doesn't work with the remote, repeat the entire process.

Good luck.

Jun 03, 2011 | Innovage Jumbo Remote Control

1 Answer

I recently purchased an innovage jumbo universal remote. And there are no directions on how to find the codes.


Start by turning on the TV, press and release the TV button,the light will flash once, press and hold CODE SEARCH the light will remain on, press and release the POWER button,the light will flash while searching for the code,once the TV turns off, press ENTER or OK , the remote is now programed...hope this was helpful...

Apr 26, 2010 | Innovage Jumbo Remote Control

1 Answer

Codes fro emmerson jumbo universal remote


these are the codes...one should work....004...048...049...080...107...162....169...180

Mar 09, 2009 | Directed 434MHZ Remote Control

Not finding what you are looking for?
Remote Controls Logo

Related Topics:

82 people viewed this question

Ask a Question

Usually answered in minutes!

Top Remote Controls Experts

The Knight
The Knight

Level 3 Expert

68352 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Cindy Wells

Level 3 Expert

4759 Answers

Are you a Remote Control Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...