Question about Broksonic TV

Open Question

Broksonic model no ccvg-2070 does not work

This tv was working fine 1 day and the next day it would not come on.
Is there a anything we can do? We took it to be repaired and they said
they could not repair it. We purchased this tv 4 years ago and it is a flat screen.

Posted by on

5 Suggested Answers

  • 95 Answers

SOURCE: BrokSonic tv model ctgv-2727

http://www.theclicker.com/tv/broksoni.htm

Posted on Mar 13, 2008


  • 267 Answers

SOURCE: how do i tell if my broksonic tv is a digital tv

IT WOULD SAY HD READY ON THE FRONT OF THE SET. YOUR SET IS NOT HD READY. USE CONVERTER BOX FOR HD CHANNELS.

Posted on Jan 22, 2009

SOURCE: My Brocsonic tv has audio and no picture

its technical work, need to open backcover of tvset' to resolder the heater line section;

Posted on May 25, 2009

  • 1 Answer

SOURCE: defective lcd screen

It's not the screen, it's the inverter that drives the backlight.

Posted on Jul 15, 2009

johnnydiode
  • 647 Answers

SOURCE: I have a Broksonic Model

It sounds like you are missing the luminance drive to the CRT board or the voltage that is provided to amplify the signal. The reason you get a good on screen display is that it is it is fed from aseperate circuit and you get some images because the chrominance signal is still being supplied. The video signal is made up of these two component- luminance and chroma. You usually need an oscilliscope to troubleshoot.

Posted on Sep 28, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Will Amazon TV stick work with Broksonic CCVG-3276?


As long as your television has an hdmi port the Amazon fire stick will work.

Nov 11, 2014 | Televison & Video

1 Answer

Broksonic 19 inch CCVG 1935 - no sound, no picture, just a blue screen


Blue screen means either no signal (if unit has rear connections hook a DVD etc to one and go to that input and see if it works) Or the blue may mean set is in shutdown----5 months old and it should still have a warranty?

Apr 23, 2012 | Broksonic CCVG1935 19 in. LCD TV

1 Answer

I need a code and instructions for my one for all urc3220 remote control for a broksonic tv


  • Find the programing code for the device's manufacturer in the manual.
  • Turn on the device you are programming the URC 3220 remote to control.
  • Press the "TV" "DVD/VCR" or "CBL/SAT" button on the remote.
  • Press and hold the "SET" button until the red LED blinks two times.
  • Release the "SET" button and type the manufacturer's code. The LED will blink twice to confirm the entry.
  • Aim the URC 3220 at the device and press the POWER key. If the device turns off, the code worked. If not, repeat Steps 3 through 5 using the next code on the list.
  • Known Broksonic codes are 1112, 1432, 2112

    Jun 20, 2011 | Broksonic CCVG-3276 32 in. LCD TV

    1 Answer

    Gray bars while full screen viewing my Broksonic CCVG-4500 42 in


    hi, i have a broksonic model ccv-4500 , these is a monitor or tv because i cant founder the digital cable imput. thanks.

    Apr 25, 2010 | Broksonic CCVG4200 42 in. Plasma TV

    1 Answer

    Acoustic solutions tv lcd32762hdf will not turn on


    Power Supply board is dead.Replaced the power supply board.Tries these websites Shopjimmy.com,Ebay.com to buy a refurbish power supply board for the replacement.

    Mar 17, 2010 | Broksonic CCVG-3276 32 in. LCD TV

    1 Answer

    I have owned my Broksonic CCVG-3276 since October 2008 and on June 10th, I was able to get sound but the picture went black. When I turn it off for a few minutes then back on, it works for seconds, then...


    Ur LCD inverter backlght board is dead.Replaced this board will get ur picture back.It a long board in shape.Tries Shopjimmy.com,Ebay.com to buy a refurbish LCD inverter board for the replacement.

    Feb 25, 2010 | Broksonic CCVG-3276 32 in. LCD TV

    2 Answers

    My Brocsonic tv has audio and no picture


    its technical work, need to open backcover of tvset' to resolder the heater line section;

    May 12, 2009 | Broksonic TV

    1 Answer

    Defective lcd screen


    It's not the screen, it's the inverter that drives the backlight.

    Nov 22, 2008 | Broksonic Televison & Video

    Not finding what you are looking for?
    Broksonic TV Logo

    Related Topics:

    40 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Broksonic Televison & Video Experts

    The Knight
    The Knight

    Level 3 Expert

    72640 Answers

    Cindy Wells

    Level 3 Expert

    4950 Answers

    Jerry Greenberg
    Jerry Greenberg

    Level 3 Expert

    1667 Answers

    Are you a Broksonic Televison and Video Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...