Screen looks 3d

3D mink eyelashes Wholesale 3D Mink Eyelashes Manufacturer Mink Lashes Factory Buy China wholesale 3D Mink eyelashes factory mink lashes 100% 3D Siberian Mink Lashes Factory, with natural looking and luxury private packaging. Wholesale 3D Mink Lashes with Big discount Free Samples is Available! If you wanna customized box and premium individuals 3D Mink Lashes manufacturer, come to get.
Wholesale 3D Mink Eyelashes Manufacturer Mink Lashes Factory

You need to look for TV's labeled 3D ready feature a screen capable of displaying 3D content, and have the necessary emitter built-in. One important thing to keep in mind is that you'll need more than just a 3D TV to watch 3D at home - you'll also need pairs of 3D Glasses for anyone watching, as well as a 3D video source, like a 3D Blu-ray movie.

try to close CC or close caption on menu..

For the M3D420 Vizio TV, you need a 3D source connected to the TV with an HDMI cable that supports 3D. Some older HDMI cables will not carry all of the data of a 3D source. Turn off the set top box (for example a 3D Blu-ray player). Set your TV to the correct input (press the Input button on your remote). Then turn on the set top box and (for the Blu-ray player) insert your 3D content disc. Start playing the movie. When you see the prompt "3D content detected", highlight Yes to switch to 3D display and press OK to start the 3D playback.

After selecting Yes and pressing OK, then put on your 3D glasses. Make sure that you are sitting with your eyes level with the TV screen eye-line and looking straight at the screen. (If you are off-line, you will not get the 3D experience.)

These directions probably apply to all 3D Vizio TVs. I hope this helps.

Cindy Wells

Sounds like the convergence circuit failed. Get an estimate from a repair shop. Not for DIY'ers.

These sets have several common problems listed below.

Problem #1) Convergence

Symptoms:

• Screen Looks Distorted/3D
• Colors wont align
• Screen may look distorted
• No Audio/Video - makes a chirping sound.

Problem #2 CRT Fluid has clouded over. Symtoms

• Dull looking screen
• White looking sceen
• Halos around objects
• Red/Orange looking

You can see some examples and find a fix here...

http://www.fixya.com/support/r2861467-solution_video_looking_whiteish_dull

sounds like the convergence has gone out.

LOOK FOR OPEN FUSE (CTM) BY IHVT, THE MIDDLE ONE.

Projection TV sets have several common problems listed below.

Problem #1) Convergence

Symptoms:

• Screen Looks 3-D
• Colors wont align
• Screen may look distorted
• No Audio/Video - makes a chirping sound.

Example Photo:

Problem #2 CRT Fluid has clouded over.

Symptoms

• Dull Video, Washed out
• White/Bright looking video
• Halos around objects
• Red/Orange looking

Example Photo:


You can see more examples and find a fix here...

http://www.fixya.com/support/r2861467-solution_video_looking_whiteish_dull

have the dm board checked