Re: how to reset time columbia small sport watch cl-5008
Press mode til you get to time then press and hold set. Once the hour starts blinking press the ST/SP button to set the time, then press set again for the minutes and do the same thing again. This should let you set your watch.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
mcdevito75 here, I took a fast search and came up with, www.Columbia.com Customer service # 800-622-6953 6A---6P Mon--Fri. Est. time. Hope this helps. Or you can visit a small watch repair shop in your area for a replacement Band / strap.
Press and hold "set" until the "Chime" screen comes up. Let off "set" and then press "mode" - This will take you to the clock. adjust the numbers by using "st/sp" and "reset". Use the mode button to cycle through the hour, min, sec and date.
Try resetting your watch first. To do that press all four buttons at the same time.
Then to set the time, hold down the set button until the display flashes. You can then use
the mode button to cycle through the display features and set them. Use
the strt/stp and reset to adjust fields.
Buy a set of precision srewdrivers. Remove back(4 screws),take your 1 mm flat screwdriver and push straight down at the end of the hold down strap at the inside end. KEEP IT TIGHT IN THE NYLON CATCH! The hold down is hooked on the bottom of it. It will release and you will be able to lift that end and replace the battery. Then just push it back to hook it,VOILA! R.J.S.
Press and hold "set" until the "Chime" screen comes up.
Let off "set" and then press "mode" - This will take you to the clock. adjust the numbers by using "st/sp" and "reset". Use the mode button to cycle through the hour, min, sec and date.
This was a pain in the **** until I figured it out.