Question about Toshiba Televison & Video

Open Question

Toshiba rdxv45-dvd will not load.

My dvd has developed a fault.
The tray appears to have a life of its own.
When I insert a dvd the tray does not close fully.If I push it home the dvd will not load and the "close" caption appears.When I switch it off he tray opens and then attempts to close but fails.
Prior to this the tray would only partially open.
The vcr and hdd all work fine to date.
Regards
Sal

Posted by on

5 Suggested Answers

  • 1 Answer

SOURCE: Locked dvd tray.

To unlock, manually press and HOLD the open/close button & the stop button simultaneously, and HOLD them both down until the lock picture disappears.   The DVD will eject when you press the open/close button. 

 

To lock the DVD inside the machine, repeat the same step, and it will lock it inside. 

Posted on Oct 20, 2007

spare_head_2
  • 47 Answers

SOURCE: Locked dvd tray.

Hi SoraTotoro,

This sounds like the child lock has been inadvertently activated . Look through the manual to find the key combination to unlock it.

Hope this helps.

Spare head 2.

Posted on Jan 06, 2008

  • 1 Answer

SOURCE: Locked dvd tray.

Press and Hold EJECT Button, While UNLOCK Is Displayed :-)

Posted on Feb 21, 2008

  • 3 Answers

SOURCE: ge 1101 pa dvd player keeps saying no disc

Try turning the disc over.

Posted on Dec 25, 2008

  • 1 Answer

SOURCE: DVD player not opening / ejecting

I have the same problem. I just want the damned thing to return my precious audio CD. I can hear a motor trying to open the tray, but something seems to be mechanically jammed.

Posted on Apr 29, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How unlock a Toshiba sdv398kc dvd?


Toshiba SD1200 / SD1600 / SD1700 / SD210E / SD2109 / SD2150 / SD220E / SD2800 / SD3750

  1. Insert DVD with foreign region code
  2. Wait for the error message to appear
  3. Press M (Memory)
  4. Press 1
  5. Press PLAY

Toshiba SD120E / SD125E / SD220E

  1. Get the multi-region update disc for the SD220E (http://www.geocities.com/its_yahell/toshiba_sd220e.html)
  2. Write it in DAO mode
  3. Switch on DVD Player
  4. Press SETUP
  5. Under the Picture option change Pal/Auto setting to Auto
  6. Press SETUP
  7. Insert the update CD
  8. The following images are displayed: ?'Nabe the Wiz?' and then ?'FIN?'
  9. Remove CD
  10. Switch DVD Player On/Off

Toshiba SD240 / SD350E / SD3960 / SD3980

  1. Open the disc tray
  2. Press 2, 4, 0, 3, 9, 6, 0
  3. Select region using ENTER (9 = multi-region)
  4. Close the disc tray
  5. Power off

Toshiba SD3109

  1. Open the disc tray
  2. Insert foreign DVD
  3. Close the disc tray
  4. Press STOP before the error message is displayed
  5. Press "T" twice
  6. Enter a time of one second
  7. Press PLAY

Toshiba SD43HK

  1. Turn on the player (without a disc inserted)
  2. Press ENTER
  3. Press 8, 4, 2, 6, 9
  4. Press ENTER
  5. If the player doesn't turn off automatically, turn it off

Toshiba 23HLV84 / SD-24 VLSL / D-KR2 / D-R1 / D-R2 / D-R255 / D-R4 / D-VR30 / D-VR4 / MD13N1 / MD13N3 / MD13P3 / MD14FN1 / MD20FM1 / MD20FN1 / MD20FP1 / MD20P1 / MD9DM1 / MD9DP1 / MW20FM1 / MW20FN1 / MW20FP1 / MW20FP3 / MW24FM1 / MW24FN3 / MW24FP3 / RD-X2 / RD-XS34 / RDXS30 / RDXS32 / RDXS52 / RSTX20 / RSTX60 / SD1008 / SD100X / SD106E / SD114E / SD1209 / SD1209 / SD114E / SD1209 / SD1300 / SD130E / SD1402 / SD140E / SD145E / SD1850 / SD1900 / SD2006 / SD2008 / SD2108 / SD214E / SD22VE / SD22VL / SD245 / SD248E / SD24VB / SD250E / SD2600 / SD2650 / SD2710 / SD2715 / SD2805 / SD2810 / SD2815 / SD2850 / SD320V / SD324ES / SD34VL / SD35VF / SD36VESE / SD3860 / SD400V / SD412V / SD4205 / SD44HK / SD4960 / SD500E / SD5205T / SD5907 / SD5915 / SD5980 / SD6915 / SD9100 / SDH400 / SDK200 / SDK220 / SDK330 / SDK350 / SDK530 / SDK730 / SDK740 / SDK750 / SDP1000 / SDP1400 / SDP1500 / SDP1600 / SDP2500 / SDP2600 / SDV290 / SDV291 / SDV390 / SDV391 / SDV395 / SDV396 / SDV593 / SDV65HT / VTD1420 / VTD1431 / VTW2185

Dec 17, 2016 | Toshiba Televison & Video

1 Answer

Why is my Epson WF7620 showing" cassette 1 insert correctly"


The switch inside that makesxeither an electrical connection orca mechanical one tells the printer that the paper tray is home loaded and awaiting commands is not being activated by the tray
The switch has become faulty overtime and needs,a replacement
The bit on the tray that pushes the tray loaded switch has broken off the tray is missing the switch or a wiring fault has developed
And the switch has no power so it still can't see the tray even if it is loaded thus error paper tray missing continuously is being displayed

Jul 04, 2016 | Epson WorkForce WF-7620 Wireless Color...

1 Answer

Mini cd wont load in dvd drive


try cleaning the lens with a q-tip and alcohol

Apr 22, 2012 | Toshiba Computers & Internet

1 Answer

DVD w ill not eject from my Toshiba DVD player...Screen says open but the door never does


You will have to change the loading tray drive belt. For which you have to remove the top cover and then unscrew 4 screws that hold the disc mechanism and turn it upside down.You will see a small belt on a pulley which has to be replaced. Do all this only if you have access to replacement belt. In some players if you look at the bottom under the drive mechanism you will find a ****. Insert a thin screwdriver and push a plastic lever in the direction indicated with an arrow. The loading tray will eject the disc. Only some models have this feature. You have not mentioned the model # of your player.

Aug 08, 2011 | Toshiba DVD Recorder

1 Answer

Does not play when disc entered nor when play is selected. (XD-E500KB)


Hello

Push in the plug connected to the "Video Out" jack on the rear of the Dvd to ensure it is connected firmly. Check the connection at the back of the TV as well.

Press the "Source" or "Input" button on the TV remote to verify the television's input is set to the DVD connection.

Press the "open/close" button on the front of the DVD to open the disc tray. Insert and test different DVDs to determine if the problem is with a specific disc, or if the player will not operate.

Eject the DVD tray and insert the DVD laser lens cleaner. Close the tray and wait a few seconds for the cleaning disc to load. Press "Play" on the front control panel to spin the disc through the cleaning cycle.

Remove the cleaning disc, insert a DVD and test playback operation. If the machine still will not play discs, the main receiver unit may require internal repairs best left to an experienced technician.

THANK YOU FOR VISITING FIXYA

Feb 02, 2011 | Toshiba Televison & Video

1 Answer

I cannot open tray to insert DVD


Possible fault in the loading mechanism of the player, it can be failure of the belt or the gears or the loading motor, loading motor drive IC or the trigger from the main control processor.
You might have to check the loading motor voltages from the processor , the main voltages to the drive .Check manually the mechanism to confirm that it moves freely.

Jan 03, 2011 | Televison & Video

1 Answer

I have two sony laptops, vgn-n31 and vgn-fs515h. vgn-n31 dvd/cd drive developed a fault when i removed it. so i thought i would replace the drive with that from my other laptop ( which is completely...


Hi. Check the transport mechanism of the laser head. The transport can get stuck with dust, hair or vibration. If the transport is stuck, the drive still appear but can't read the CD because the lens is not moving properly.

Clean the area around the lens with cotton buds (be careful not to scratch the lens). Move the lens mechanism away from the center (use a plastic paper clip, slide gently). Place a DVD/CD disc and reboot your laptop. The DVD will auto align the drive during boot-up.

Good luck.

Sep 02, 2010 | Sony VAIO Laptop

1 Answer

Tray Will Not Open To Load


Sound like the belt has broken on it from the gear that opens to motor that opens the tray.

Aug 11, 2009 | Toshiba SD-3980 DVD Player

1 Answer

DVD/CD tray will not load


With the R800, you must slightly open the paper feed panel door, lift it vertically about an inch and then lay it open horizontally away from the printer. Without doing this, there is no way to insert the disc tray.

Mar 13, 2009 | Epson Stylus Photo R800 InkJet Printer

3 Answers

Toshiba e-studio161 Developer


Technical Service Procedure
Correct procedure for service of TOSHIBA e-Studio 161
When the spanner light and the developer (sun) light are illuminated it is time for a service.
* Try and run the PM Service and drum life counters together.
* Part that are required for a 50,000 copy service (OD 1620 DRUM, D1620 DEVELOPER, BL1620D DRUM BLADE)
* Clean and inspect drum unit.
* Clean all optics and glass.
* Clean and rewire transfer corona.
* Clean and check main charge needle electrode [saw tooth]
* Clean and check fuser units including blades, rollers and scraper fingers.
* Clean erase lamps and ozone filters.
* Clean and check all feed rollers.
* Clean machine inside and out.
* Replace the required parts.
* Reset mini maintenance counters:
* [CLEAR] > [EXPOSURE] > [CLEAR ]> [EXPOSURE] and the machine will die.
* Input [20] [START] [01] [START]“000””000” will flash on the display.
* Reset the drum life counter:
* Input [24] [START] [07] [START] "000"000" will flash on the display
* Reset developer life counter:
* Input [42] [START] [01] [START] “000””000” will flash on the display.
* Once all the part have been replaced and the counters been reset, check the copy quality.
* Notes: Application of the patting powder is for reducing the friction between the drum and cleaning blade. If the application of
patting powder is neglected, the drum and cleaning blade may be damaged. Please clean off the patting powder before putting the
cleaner unit into the machine.
Developing doctor gap adjustment
1) Loosen the developing doctor fixing screw A.
2) Insert a thickness gauge of 1.5mm to the three positions at 20mm and 130mm from the both ends of the developing
doctor as shown.
3) Push the developing doctor in the arrow direction, and tighten the developing doctor fixing screw. (Perform the same
procedure for the front and the rear frames.)
4) Check the clearance of the developing doctor. If it is within the specified range, then fix the doctor fixing screw with
screw lock.
* When inserting a thickness gauge, be careful not to scratch the developing doctor and the MG roller.
CHANGING A TRAY’S PAPER SIZE SETTING
Follow these steps to change a tray’s paper size setting.
* The paper size setting cannot be changed when the machine has stopped temporarily due to running out of
paper or a misfeed, or during interrupt copying.
* During printing (even in copy mode), the paper size setting cannot be changed.
* A5 (ST) size paper can only be selected in upper paper tray.
* Do not load paper that is a different size than the paper size setting. Copying will not be possible.
Hold down the [PAPER SIZE ENTER]
key for more than 5 seconds to
set the selected paper size.
The currently selected
paper feed location
indicator will blink and
the corresponding paper
size (which is currently
set) indicator will light
steadily. All other
indicators will go out.
If the machine has two paper trays,
use the [TRAY SELECT] key to
select the paper tray for which you
wish to change the paper size setting.
Each time the [TRAY
SELECT] key is
pressed, a paper tray will
be indicated with a
blinking paper feed
location indicator.
Use the [ORIGINAL SIZE ENTER] key
to select the paper size.
The indicator of the
selected paper size lights
up.

Apr 11, 2008 | Toshiba e-Studio 161 Copier Copier

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

33 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toshiba Televison & Video Experts

The Knight
The Knight

Level 3 Expert

72640 Answers

Jaime Hernandez

Level 3 Expert

2296 Answers

Henry  Thomas
Henry Thomas

Level 3 Expert

1074 Answers

Are you a Toshiba Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...