Question about Washing Machines

1 Answer

TRICITY BENDIX AUTOWASHER CAW 1000 will not operate

My machine will not operate on any programme despite the red light being on. Is it possible that it could be the programmer selector knob is not working correctly. It seem's to go around perfectly OK or is more likely that it will not operate because the door catch is faulty and therefore nothing at all will operate? If so do you know anywhere I can get the instructions pn how to replace either or these items on the machine.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,462 Answers

If not starting at all, fault is probably the door interlock - easy to replace.
disconnect from mains.
prise off the plastic clamp holding door seal to cabinet and peel back the seal in the area of the door interlock.
interlock is held by 2 screws from the outside and remove these so interlock comes away. remove electrical plug and socket connection and remove the small diameter hose at the bottom of the interlock. interlock can now be removed completely.
refitting is just the reverse.

Posted on Nov 10, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to remove filter on tricity bendix 1000 washing machine?


tricity bendix aw1001w eco shower washing machine ...

? 1:11
www.youtube.com/watch?v=lJZrGLfYdtQ
Aug 19, 2009 - Uploaded by whichwasher2007
my aunt's old tricity bendix. it says aw1000w on the front, but check ... How do you clean out mold in the ...

Sep 29, 2015 | Tricity Bendix AW1000W Front Load Washer

1 Answer

Bendix 800 autowasher de luxe, drum spin snagged then cleared.


should b nothing off this description on ure machine unless the pump coil has over heated iff so just replace coil and check for blockages

Jul 13, 2009 | Tricity Bendix AW1000W Front Load Washer

1 Answer

Manual for tricity bendix 1000


Please try here:

http://www.serviceforce.co.uk/pdfs/U23248.pdf

If this is your model (there are 5 models with the same name) please rate my response.

If not, please let me know and I will find the link for your model.

Thanks.

Feb 24, 2009 | Tricity Bendix AW1000W Front Load Washer

1 Answer

Is my bendixx 1000 autowasher hot or cold fill


Look at the top left rear of the cabinet, there you will see the connections for the inlet valve(s), if there is only 1 then it is a cold fill only, if there are 2 connections , then it is hot and cold fill.
They are normally marked H and C.
Plz leave feedback for this solution.
thanks.

Dec 17, 2008 | Tricity Bendix WDR1040W Front Load Washer...

1 Answer

How do you replace a door latch on a Tricity Bendex CAW 1000 washing machine


remove door complete.remove screws holding 2 halves of door together and prise door into 2 halves and all is revealed

Nov 10, 2008 | Kenmore Elite 45986 Front Load Washer

2 Answers

Tricity Bendix AW1002W


my washing machine is making funny noise before it starts and today it will not start at all just the funny noise

Oct 18, 2008 | Tricity Bendix AW1000W Front Load Washer

1 Answer

Bendix 800 autowasher


put it on its back on yhe top side of the motor you will see the brushes two screws hold each one on.

Jan 03, 2008 | Tricity Bendix AW1000W Front Load Washer

2 Answers

Tricity Bendix washer won't take fabric softner in rinsing cycle


Your machine possibly has a defective water inlet valve which is preventing water from entering the dispenser channel to flush the fabric softner into the machine. The inlet valve in inside of your machine right where the washer hoses attach. the solenoid valves on the inlet will need to be checked with a multimeter to verify if they are working properly.

Mar 03, 2007 | Tricity Bendix AW1000W Front Load Washer

Not finding what you are looking for?
Washing Machines Logo

Related Topics:

359 people viewed this question

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Gerry Harvey
Gerry Harvey

Level 3 Expert

1456 Answers

yadayada
yadayada

Level 3 Expert

74311 Answers

Brad Brown

Level 3 Expert

15320 Answers

Are you a Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...