Question about Zanussi ZWF1440 Front Load Washer

1 Answer

Zanussi zwf1631w error code e40

Machine keeps coming up with this code and wont start ... any suggestions ????

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 97 Answers

Hiya
E40 is the fault code for the doorlock, these are relatively cheap and easy to fit and if an independent (non zanussi) engineer was to fit it, you will probably be looking at around £40-£50 all in as a rough guide.

hope this helps

please dont forget to rate the helpfulness of this reply, thanks kj

Posted on Nov 11, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to reset zanussi jetsystem programme function board with error E40


E40 is a door lock fault code, you need to replace the door lock,
you cannot reset the fault code, this happens automatically when the fault is rectified. nice easy job though.

Sep 30, 2016 | Zanussi Washing Machines

1 Answer

My zanussi washer is coming up with error code 40 anyone no what it is


Family error code E40 is visible to customers and (could be E41,E42,E43,E44 and E45 only visible in service mode) means problem with open door or door interlock.

Dado

Aug 27, 2015 | Zanussi Washing Machines

1 Answer

E 40 code error. Just keeps clicking then error message?


e40 is the alarm if machine started with door open. door lock may be faulty or connections/ wiring to it. possible for door ******/handle to come mis aligned in the door you have to split the door to check the handle shaft has not come out. watch where the springs go. the clicking is the electronic trying to lock the door.

Aug 03, 2010 | Zanussi ZWF1440 Front Load Washer

2 Answers

Zanussi Washing Machine Troubleshooting, Problems BY EORR E40


E40 is code for the door being open. Try closing/slamming the door hard a few times

Oct 09, 2008 | Washing Machines

3 Answers

Zanussi zwf1631w jetwash front loading washing m/c


had to call an enginer out, the problem was down to a faulty motor rota, to identify if e30 is this fault, rotate the drum (so the motor rotates) and try to start the m/c. if it runs ok you know to change the rota. hope this may help someone

Sep 12, 2008 | Zanussi ZWF1440 Front Load Washer

1 Answer

Zanussi zjd1219


Hi

Machine is showing E40 ERROR

Sep 07, 2008 | Zanussi ZJD1219 Front Load Washer / Dryer

1 Answer

Error`E40


hi there e40 fault is a problem with your door interlock. get it replaced and all will be fine..

Feb 28, 2008 | Zanussi ZWD1470W Front Load Washer / Dryer

1 Answer

E40 error code


The E40 error code indicates a loss of electrical power usually but not always due to the door not shutting properly or not locking. But, since you smelled burning it could be any electrical short that blew a fuse and shut the machine down. It could also be the motor windings with the internal overload protector shutting it down.

Dec 16, 2007 | Zanussi ZWF1440 Front Load Washer

1 Answer

RE: ERROR E40 ON ELECTROLUX ZANUSSI JETSYSTEM 1200


hi there e40 fault could either be your door interlock or main pcb

Dec 11, 2007 | Zanussi FJS1225W Front Load Washer

Not finding what you are looking for?
Zanussi ZWF1440 Front Load Washer Logo

899 people viewed this question

Ask a Question

Usually answered in minutes!

Top Zanussi Washing Machines Experts

Gerry Harvey
Gerry Harvey

Level 3 Expert

1456 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Are you a Zanussi Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...