Question about Car Audio & Video

1 Answer

I need a wire harness diagram

Wires were pulled out the harness and i dont know where they go.....

Posted by on

  • 3 more comments 
  • morph35 Dec 01, 2008

    hi just a pic of a wiring diagram for a pioneer deh-2000r please then maybe my wife will stop naggin me many thanks

  • Anonymous Jan 10, 2009

    JVC KD-SX740

  • dad1_01 Jan 15, 2009

    i have sony mex 5di car stereo but wires are pulled out for speakers on my plug in back of stereo. could you please help me to find out witch pins go for speakers?

  • Anonymous Jan 17, 2009

    hello i have one of these head units, its a dmx5555z and i need to know how its wired. can some one please email me pics or diagrams of how the harness is wired. g_killa2000@hotmail.com gregory.oj.roberts@gmail.com



    PLEASE HELP

    Thanks



  • rakya33 Mar 27, 2009

    I'm missing the wires for a Alpine CDM-7835. Can someone tell me where I can go to find these wires?

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 218 Answers

If you could tell the brand and model number I might be able to help. A picture of the receptacle at the back of the radio where the plug goes in would help too. If you can't add a picture, then a discription might be enough (number of pins, number of rows, etc.) .

Posted on Nov 11, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

L am placing an after market radio into a ford forte au 11 2000 model after pulling out the original radio out l need a wireing diagram for the original harness of 16 wires the new radio has 12 wires


http://www.fordaustraliaforums.com/forum/showthread.php?50606-Need-wiring-diagram-for-au-11-ford-2002-for-stereo-please-help

there are two links on the second post.

Aug 15, 2016 | Ford Cars & Trucks

1 Answer

NEED WIRING DIAGRAM


If you are referring to installation and have the aftermarket wiring harness, The wires should be color coded. RED, YELLOW, & BLACK are power, ignition and ground. These should correspond to matching wires on the back of the head unit (CD player). Match the colored wires from the back of the unit to the same colored wires on the aftermarket harness and then connect them using wire connectors/wire nuts. Once you have them into the correct order the aftermarket harness should connect into the harness in your vehicle. I hope this answers your question =)

Nov 05, 2013 | JVC AM FM CD DET FACE CAR STEREO

1 Answer

Ruck@yahoo.com put new regulator on main drivers window. still dont work..96 camry


does it have power and ground to motor when you work the switch and if it dont then there is probably some broken wires in the wiring harness that goes from the left kick panel to the door. they always break in the section between the door and body and one way to check this is to pull the harness out of the door and cut the rubber back and start pulling on each wire to see which one is broken and they could already be visibly broken.the switch or the motor itself could also be bad if you did not replace the motor and the only other way to check all of this is with a electrical wiring diagram and a volt meter.i have repaired tons of these with the wires broken. let me know if i can help any further and to give me more info. good luck...............

Jun 17, 2011 | 1996 Toyota Camry

1 Answer

I have a 2004 Hyundai Elantra and am trying to install a stereo but dont know what the wiring diagram is..any help?


Personally owning this car and installing several Hyundai stereo's, I would purchase a wiring harness kit from car audio shop or electronics retailer. The wire harness has a plug that connects to the cars wiring harness. This wiring harness kit will also list the wires to connect your new aftermarket radio to the harness. I would also recommend using crimped **** connectors to attach the two harnesses together.

Feb 24, 2010 | 2004 Hyundai Elantra

3 Answers

I dont know how to wire it to my car stereo wires


Do yourself a favor and run to audio store or even autoparts store & get an adapter plug/harness, cost is a few bucks but well worth it. It plugs into factory harness & you wire your new stereo to it according to diagram with new system.

May 02, 2009 | 2001 Dodge Stratus

1 Answer

Suzuki 1999 Quadrunner LTF250F wiring harness issue


no power to my magneto on my 99 suzuki LT-F250F dont know what one of the four other wires should be power i found the ground please help

Apr 19, 2009 | Suzuki RGV 250 L Motorcycles

1 Answer

Audio wiring problem


Radio Constant 12V+ Wire: White/Green
Radio Switched 12V+ Wire: White/Red
Radio Ground Wire: Black
Radio Illumination Wire: n/a
Radio Dimmer Wire: Red/Black
Radio Antenna Trigger Wire: n/a
Radio Antenna Location: Rear Glass
Front Speakers Size and Location: 6 1/2′ Doors
Left Front Speaker Wire (+): Blue/Green
Left Front Speaker Wire (-): Gray/Black
Right Front Speaker Wire (+): Red/Green
Right Front Speaker Wire (-): Brown/Black
Rear Speakers Size and Location: 6′ x 9′ Rear Deck
Left Rear Speaker Wire (+): Blue/Yellow
Left Rear Speaker Wire (-): Gray/White
Right Rear Speaker Wire (+): Red/Yellow

Apr 05, 2009 | 1998 Honda Accord

1 Answer

Got a new deh-6000ub and wire harness for honda accord dont know how to install the harness


You need an installation harness. You can get them at most anyplace that installs car stereos. Once you have the installation harness for your car, you just match up the colros of the wires on it to the same colors of the harness for the Pioneer. Make sure that each wire is insulated from anything by using some electrical tape and make sure they all have good connections. Strip away close to about an inch on each wire and then twist them together and then tape them good. After all the wires have been connected, all you need to do is plug the Pioneer harness into the Pioneer radio and then plug the installation harness into the factory wire harnees connector in the car. If you have any wires that do not match up in color, you can normally leave then not connected to anything, but make sure they are insulalted with electrical tape. Most all the wires should say what they are for. Matching the colors is the easiest way to do this.
Let me know if you need more help. I can always give you a detailed wiring of the Pioneer. I do not have the wiring diagrams for the car though.

Jul 20, 2008 | Pioneer Car Audio & Video

1 Answer

Wire harness diagram


www.scosche.com will give you the cars wires, u may want to just by a harness adapter, cutting wires=bad


Don

Nov 21, 2007 | JVC KD-S680 CD Player

Not finding what you are looking for?
Car Audio & Video Logo

Related Topics:

1,005 people viewed this question

Ask a Question

Usually answered in minutes!

Top Car Audio & Video Experts

xxxxxx xxx

Level 3 Expert

4789 Answers

yadayada
yadayada

Level 3 Expert

69244 Answers

The Knight
The Knight

Level 3 Expert

72271 Answers

Are you a Car Audio and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...