Question about HP LaserJet 2840 All-In-One Printer

2 Answers

50.2 error when I am trying to print - HP LaserJet 2840 All-In-One Printer

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 66 Answers

Hi,

that error was fuser error i think your fixing ***. is defective.try to replace the heating element to resolve your problem...

Posted on Nov 10, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • HP Master
  • 1,314 Answers

This is a fuser problem.

1. Turn the printer off for approximately 20 to 30 minutes, and then turn the printer back on.
2. If the error persists, replace the fuser

Posted on Nov 10, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Unable to clean 50 error


I have a Brother MFC-440CN fax machine and I am receiving error message "unable to clean 50". Can anyone help me to fix this error problem

Jan 13, 2010 | Brother Office Equipment & Supplies

2 Answers

Error 50 brother dcp 130 d


on my DCP 130C display appear an errore message "imp. stamp 50". This is an error message in italian language that indicate impossible to print, error 50.
Please, have you some suggestion to resolve this problem?
Thansk in advance

Sep 19, 2009 | Brother DCP 130C All-In-One InkJet Printer

1 Answer

Message unable to print 50


Machine Error 50 either means that there is a loose object inside the machine (usually piece of paper), or that there is a mechanical error which would need you to have the machine sent to service.

Jun 02, 2009 | Brother MFC 240C All-In-One InkJet Printer

1 Answer

HPLaserjet4P - printer service 50 -


Hi,

A 50 Service error is a fuser error. Turn the printer off for 5 to 10 minutes, then turn it back on. If the error is still there, I think your going to need to make a service call you can try reseating the fuser, but be sure to let the fuser cool completely before touching it.
Good Luck the HP Laserjet 4p is a great printer.

Jan 28, 2009 | HP LaserJet 4 plus Printer

1 Answer

Printer will not print, as it will not cancel the last document waiting to be printed. Then it says printing started and copies the document to 50 50% and then completely stops.


Not really a solution but...My error states "Unable to Print 50" with a yellow exclamation point. This happened after a paper jam. Still trying to get the answer and will let you know when I do.

Nov 25, 2008 | Lexmark Office Equipment & Supplies

1 Answer

Error 50


Is that an error code "Cartridge Error 50C" ? If so, see below....

Cartridge Error 50C: Your print cartridge has shorted.
1. Power off your All-in-One and unplug it.
2. Plug in your All-in-One again and turn it on.
3. Uninstall and then reinstall your cartridges.
4. If this does not resolve the issue, try the troubleshooting steps for the other cartridge errors below.

Error: Black Cartridge Missing - The black cartridge is not installed. (Install cartridge PN 82)
Error: Color Cartridge Missing - The color cartridge is not installed (Install cartridge PN 83)

Cartridge Error: Complete the following instructions:
1. Power off your All-in-One.
2. Use both hands to lift up the scanner unit until the scanner support holds it open.
3. Turn the All-in-One on. The print cartridge carrier moves and stops at the loading position, unless the All-in-One is busy.
4. Remove the color print cartridge.
5. Lower the scanner unit until it is completely closed.
6. If the error message reappears, replace the black print cartridge with a new print cartridge.
If it does not repeat steps 1-3 and then go to step 7.
7. Reinstall the color cartridge and remove the black print cartridge.
8. Lower the scanner unit until it is completely closed.
9. If the error message occurs again, replace the color cartridge.
10. If an error message reappears, repeat steps 1-3 and reinstall both print cartridges.
11. Lower the scanner unit until it is completely closed.
12. If you receive the error message again, replace both cartridges.

Nov 22, 2008 | Lexmark X5150 All-In-One InkJet Printer

2 Answers

Unable to print 50


The MFC has a mechanical problem, or a foreign object, such as a clip or ripped paper, is in the MFC.
Turn off the MFC's power switch, and then on again. If the error message continues, leave the MFC for several minutes and try it again.

Apr 12, 2008 | Brother DCP 7010 Multifunction Laser...

1 Answer

Brother Print Unable 50 Error


No ;-)

The encoder strip switched off the ph and has to be set into place again.
see here how to fix it:
http://www.fixya.com/support/t211210-brother_mfc845cw

(enlarge the browser window to see pics somewhat better)

An advice:
when you have set the encoder strip in pos. again stick some scotch tape on the top of the ph cover where the strip runs thru to prevend the slipping off again on next paper jam ;-)

Mar 29, 2008 | Brother DCP 130C All-In-One InkJet Printer

2 Answers

Error message print unable 50


the encoder strip which gives the printhead the position is out of place (error 50). You have to open the printer and reinsert the strip:

http://www.fixya.com/support/t211210-brother_mfc845cw

Stick a 1.5 inch tape onto the printhead cover where the strip runs thru. This will prevent this accident in future!

Nov 05, 2007 | Brother IntelliFax-2480C Fax

Not finding what you are looking for?
HP LaserJet 2840 All-In-One Printer Logo

Related Topics:

77 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Office Equipment & Supplies Experts

Seeker5211
Seeker5211

Level 3 Expert

1089 Answers

kakima

Level 3 Expert

101711 Answers

mukhtar21 shaikh
mukhtar21 shaikh

Level 3 Expert

2017 Answers

Are you a HP Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...