Question about Denon DVD-2910 DVD Player

1 Answer

Unlock Deno 2910

Dear sirs or madame. I need to unlock my Denon 2910, does anuone have a solution for this. Br. Tonny

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 6,966 Answers

Hi,

Initially, pls try:

  • Verify that the tray is empty/no disc in the player;
  • Shut down/off with the front panel On/Off button and not the standby;
  • Press and hold the Open/Close, Play and Skip Reverse (I<<) buttons;
  • Maintain pressing on the above buttons and Power-ON the player with the On/Off button, (again while still holding the above buttons till the "Denon 2910" disappears from the display);
  • pls wait till LOADING completes and the front panel would display 0:00:00;
  • Using the remote control, enter 7, 3, 1, 9, 4, 6, 2, & 8;
  • The Denon 2910 will go into standby mode. Soon as it is on standby, pls press the Standby button on the front panel;
  • Pls verify region free update by pressing the Stop and Skip Forward (>>I) buttons on the front panel. The display would show “Region_Ax” The x would be the former region number that the Denon 2910 is locked into;
  • Should it not work ouot as expected, pls redo all the above steps.
Hope this be of initial help/idea. Pls post back how things turned up or should you need additional information. Good luck and kind regards. Thank you for using FixYa.

Posted on Nov 10, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Denon 2910 CD player malfunctions


is this happening with all the cds??
the case may be with the cd sometime..where the tracks wouldnt have been properly completed...

Jul 13, 2008 | Denon DVD-2900 DVD Player

Tip

My 2910 player has similar issue. The tray gets stuck on eject. Started with not...


1)just open the player
2)remove the rubber belt connecting the dc motor
3)you can open the disc tray now
4)if there are any dust particles or obstacles in the door way just clear them up by using the cloth(dry cloth preferred)
5)if you have any greasy material like vaseline,oil,etc then just put that in the door for easy movement of the disc tray

6)if needed change the rubber belt which is connecting the dc motor

7) just reconnect the rubber belt again and then just fit all screws that s all

what s more your player s disc tray will start ejecting like the previous how you were using..

any doubts you can reply me
i am always here to assist you
thank you
bye

on Jan 06, 2009 | Samsung DVD-V4600 DVD Player/VCR

1 Answer

Progressive scan problem


You need to clean your laser lens my friend. If that does not help, I'm afraid then that your laser assembly is going bad and on its last leg. The first clue to this is that you stated that the Cd's work and the DVDs do not work properly. The laser, when it gets weak, starts to mess up on the Dvds first but the Cd's will soon follow. Good Luck

Sep 05, 2007 | Denon DVD-2910 DVD Player

1 Answer

Denon Dvd-2910 only displays black and white on the tv screen


Hello,

this is not a serious problem. It just has to do with visual compatibility.

Change the DVD display to Pal or NTSC and set that of the TV to Auto or pal.

You might find the PAL/NTSC on the DVD remote, or on the button of the DVD. If it is not there, then Check display settings of the DVD.

As for the TV, Change to Auto or Pal from display settings.

Take care.

Jan 01, 2010 | Denon DVD-2910 DVD Player

1 Answer

Power is on door tray will not open with manual or


the possible problem of it is a defective mpeg board or the belt in tray to make it open if the motor have a supply to turn the motor the problem is the belt but if it has no supply from the mpeg to the motor the defect is on the mpeg board

Nov 18, 2009 | Denon DVD-2910 DVD Player

2 Answers

Hi My denon does not read any discs at all. The lase lights up 2 or 3 times and it tries to spin but only moves very slightly. I have tried to look for laser but the parts companys say I have to get the...


the whole assembly is sold for a reason.
it is almost impossible to align the laser without expensive equipment.
the disc motor has a small bearing on the top,put a drop of oil on it and spin the clamper until it is really free spinning.
disc motors are small and fragile,and can cause a no read situation from a slow spool up.

Sep 01, 2009 | Denon DVD-2910 DVD Player

1 Answer

Denon DVD 2200 - region change?


read ur insrucion book and it will tell u what to do,,,,if not go in contact with denon

Mar 07, 2009 | Denon DVD-2200 DVD Player

1 Answer

Denon 2910 CD player malfunctions


you could try this http://www.fixya.com/support/t244156-denon_2910_cd_player_malfunctions or clean the lens

Nov 06, 2007 | Denon DVD-2900 DVD Player

2 Answers

Denon 2910 CD player malfunctions


By this time I figure most peoples warranties are expired. So give this a try:

1 Open the case.
2 Turn the unit on and load a disk.
3 On top of the disk transport, you will see a black disk trying to spin as it reads the disk. You might notice that it is a bit quite as the display goes to 00H00M00S. It should be fast and a bit noisy.
4 Try loading a disk again, except this time, try to help that little black disk spin. It might take a couple of attempts, but I was able to get my 2910 working again.

The last year I've had to do this 2-3 times. But it works. From what little I have read, it may just be an issue with lubricating the right part with the right oil. I've narrowed my choices to PTFE 3n1 oil, Lithium oil, or silicone oil.

now I just need to find the right places to oil.

There should be quite a bit of noise and speed

Nov 04, 2007 | Denon DVD-2910 DVD Player

Not finding what you are looking for?
Denon DVD-2910 DVD Player Logo

Related Topics:

608 people viewed this question

Ask a Question

Usually answered in minutes!

Top Denon DVD & Blu-Ray Players Experts

The Knight
The Knight

Level 3 Expert

68223 Answers

Jonathon summesfield

Level 2 Expert

284 Answers

 Grubhead
Grubhead

Level 3 Expert

4584 Answers

Are you a Denon DVD and Blu-Ray Player Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...