Question about Jenn-Air Kitchen Ranges

Open Question

Jenn-air 47500; the control panel is no responding, and thusly neither does the oven. the range works fine.

Posted by on

  • Anonymous Jan 06, 2009

    Same problem on a Jenn-air FCE30610W electric.

    The display is completely dark, no clock, nothing, and none of the buttons on the display panel work, so the oven doesn't work.

    The light still works in the oven, and the stove top works.

×

6 Suggested Answers

  • 26 Answers

SOURCE: Jenn-Air electric range

I believe f3 means a bad oven sensor

Posted on Jan 09, 2008


  • 1314 Answers

SOURCE: jenn aire range model jjw9630aaw.

try pressing clock key

Posted on May 24, 2008

SOURCE: jenn-air jes9800AAB keeps buzzzing, front function panel flashes on and off

Your control panel is getting ready to quit. Mine did the same thing, I ignored it and now nothing on the touch panel works. About $150.00 for the part.

Posted on May 30, 2008

  • 1 Answer

SOURCE: Jenn Air slide in range JES9750AAB - Touch Pad

put on tree belt . having the same problems replaced ERC $200.00 now they are telling me touch pad touch pad is $240.00 .the stove cost $1300.00. $1740.00 how much more will i have to put in this stove

Posted on Jan 06, 2009

  • 2 Answers

SOURCE: Jenn-Air JDS8850BDS control panel malfunction

You need a new control board. I bought similar range in 2004 and I just got my 3rd control board. Heating the oven over 400 degrees and using the self-clean function kills the board.

Posted on Aug 12, 2009

  • 254 Answers

SOURCE: Our jenn air model js9860aab control panel buttons

no.. u must replace the touch pad assrmbly that whole unit.... i think u have a jds9860aab i believe... the part number u would need would be 74005750 it is for sale through sears at $272.00... u might need service.. u can take a look at part at repairclinic.com just type that part number in. ohhh also i believe this is a backordered part so most companies would prob take 2-3 weeks to get soo hope this helps..

Posted on Jan 28, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Jenn Air Oven doesn't work


Hi


Thanks for using FixYa. Error F4 in your range means oven temperature sensor circuit failure. To resolve this issue you’ll have to check the oven temp. sensor circuit if the reading is more then 1100ohms then it should be replaced however, if the rating is fine then it is the Electronic Range Control (ERC) that has gone bad & should be replaced. Please do rate the solution if the issue is resolved or post a comment for further assistance.


Thanks
Rylee

Jul 26, 2010 | Jenn-Air Kitchen Ranges

1 Answer

F2 signal on Jenn-Air model su146 range


Hi there
i have found the code for and hope this helps you.let me know how it goes.
F2 Oven too hot Replace relay board (if present) or oven temperature sensorThank you for writing to fix ya.
Best Regards Richard

Mar 20, 2010 | Kitchen Ranges

1 Answer

Our jenn air model js9860aab control panel buttons on the panel do not respond--is there a rebuild kit available to repair this -- because without these buttons, the convection oven of this duel fuel range...


no.. u must replace the touch pad assrmbly that whole unit.... i think u have a jds9860aab i believe... the part number u would need would be 74005750 it is for sale through sears at $272.00... u might need service.. u can take a look at part at repairclinic.com just type that part number in. ohhh also i believe this is a backordered part so most companies would prob take 2-3 weeks to get soo hope this helps..

Jan 28, 2010 | Jenn-Air JDS8850 Dual Fuel (Electric and...

1 Answer

Jenn-Air JDS8850BDS control panel malfunction


You need a new control board. I bought similar range in 2004 and I just got my 3rd control board. Heating the oven over 400 degrees and using the self-clean function kills the board.

Aug 11, 2009 | Kitchen Ranges

3 Answers

I have a jenn air oven and stove top. the


Just a suggestion, turn the breaker off to the range and leave off for 30 secs. This may reset the board. That's the easy way. If that doesn't help I'll try to find more on it.

Jul 24, 2009 | Jenn-Air JES9800A Electric Kitchen Range

1 Answer

Jenn-air jes9800AAB keeps buzzzing, front function panel flashes on and off


Your control panel is getting ready to quit. Mine did the same thing, I ignored it and now nothing on the touch panel works. About $150.00 for the part.

Jan 14, 2008 | Jenn-Air JES9800A Electric Kitchen Range

1 Answer

Oven panel


First try unplugging or turning off the breaker and see what happens. If that fixes it your good to go if not you probably need a control board. Some of the boards have a fuse but no one changes it as it is soldered onto the control board.

Dec 19, 2007 | Jenn-Air JDR8895AAS Dual Fuel (Electric...

Not finding what you are looking for?
Kitchen Ranges Logo

Related Topics:

27 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jenn-Air Kitchen Ranges Experts

Mike Carew

Level 3 Expert

958 Answers

Dan Webster
Dan Webster

Level 3 Expert

8147 Answers

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Are you a Jenn-Air Kitchen Range Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...