Question about Kenmore Elite 45986 Front Load Washer

1 Answer

Kenmore elite he5 - error code F30


The washer does not fill with water properly and the soap dispenser is noisy. After the washer attempts to fill, it return with a F30 error code.

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 38 Answers

F 30 code can be reset by un plugging power cord for 5 minutes also pull out the detergent dispenser and reach all the way in to the back there is a small plastic flapper valve move it from side to side with your finger this will rest code f30 and save a tech visit..

Posted on Nov 11, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Repairman can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Repairman (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

My whirlpool sport washer is flashing an F30 and making a terrible noise in the origin of the soap dispenser area and appears unalble to pump water into the machine for the cycle to begin


The F30 code refers to a failure of the dispenser motor. The clicking you were hearing was probably the dispenser motor switch going on and off trying to activate the dispenser motor.


this is an easy and relatively inexpensive repair that you can do yourself.

Jun 22, 2011 | Washing Machines

1 Answer

How to reppair a F30 error code


The F30 error code will flash when the dispenser motor cannot be driven to its proper position.

* It could have a mechanical failure in the linkage between the dispenser motor and the top of the dispenser.
* Loose wire connection between the machine control board and the dispenser motor
* Failed dispenser motor

Thanks for using FixYa!!

Nov 23, 2010 | Whirlpool Duet GHW9150P Front Load Washer

1 Answer

Kenmore front loading washing machine -- F30 error Dispenser arm keeps turning, then error occurs. Water never even enters the washer.


The F30 error code will flash when the dispenser motor cannot be driven to its proper position.

* It could have a mechanical failure in the linkage between the dispenser motor and the top of the dispenser.
* Loose wire connection between the machine control board and the dispenser motor
* Failed dispenser motor

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question

Sep 19, 2010 | Kenmore 44102 Front Load Washer

1 Answer

We have a Kenmore HE5t that has an F30 error code. When you start the washer it just keeps clicking and won't fill. Any advice?


The F30 error code will flash when the dispenser motor cannot be driven to its proper position.

* It could have a mechanical failure in the linkage between the dispenser motor and the top of the dispenser.
* Loose wire connection between the machine control board and the dispenser motor
* Failed dispenser motor

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question

Sep 11, 2010 | Kenmore Elite HE5t Washer

1 Answer

F30 code? Makes a weird noise and drains the soap from dispenser but no water is added and won't spin.


The F30 error code will flash when the dispenser motor cannot be driven to its proper position.

* It could have a mechanical failure in the linkage between the dispenser motor and the top of the dispenser.
* Loose wire connection between the machine control board and the dispenser motor
* Failed dispenser motor

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question

Sep 06, 2010 | Kenmore Elite 45986 Front Load Washer

1 Answer

Whirlpool WFW9200SQA10 Front Load Washer displays F30 code. What does F30 mean? Thanks


Hi,


"F30" indicates "DISPENSER SYSTEM ERROR" When the dispenser motor cannot be driven to its proper position this error appears in your washer. To fix this problem follow these procedures.
1. Unplug washer or disconnect power. 2. Check mechanical linkage from dispenser motor to the top of the dispenser. 3. Check wire harness connections to the dispenser motor and Central Control Unit (CCU). 4. Check dispenser motor for powered rotations.



Thank you !!

Jun 20, 2010 | Whirlpool WFW9200S Front Load Washer

2 Answers

My Whirlpool washer flashed F30. Not filling up with water.


Hi,
"F30" indicates "DISPENSER SYSTEM ERROR" When the dispenser motor cannot be driven to its proper position this error appears in your washer. To fix this problem follow these procedures.
1. Unplug washer or disconnect power. 2. Check mechanical linkage from dispenser motor to the top of the dispenser. 3. Check wire harness connections to the dispenser motor and Central Control Unit (CCU). 4. Check dispenser motor for powered rotations.

Thank you !!

Jun 13, 2010 | Whirlpool Duet GHW9150P Front Load Washer

1 Answer

Kenmore HE2 Plus 110.47512600 Error Code F30 = Dispenser System Error. Have reset CCU multiple times. When cycle starts, dispenser motor runs for 3 minutes (~11 revolutions) then stops with F30 error


The F30 error code will flash when the dispenser motor cannot be driven to its proper position.

* It could have a mechanical failure in the linkage between the dispenser motor and the top of the dispenser.
* Loose wire connection between the machine control board and the dispenser motor
* Failed dispenser motor

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question

Sep 19, 2009 | Kenmore HE2 Plus Front Load Washer

1 Answer

Error Code of F-30


The F30 error code will flash when the dispenser motor cannot be driven to its proper position.

* It could have a mechanical failure in the linkage between the dispenser motor and the top of the dispenser.
* Loose wire connection between the machine control board and the dispenser motor
* Failed dispenser motor

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question

Dec 29, 2008 | Whirlpool Duet GHW9150P Front Load Washer

1 Answer

F30 error code on whirlpool front load washer ''Duet''


You have a problem with your soap dispenser. This has been a very common problem. You need to order W10161052 Actuator, W10157886 Dispenser, 8183186 Actuator Motor. Put these new parts in and you will be fixed.

Nov 16, 2008 | Whirlpool Duet GHW9150P Front Load Washer

Not finding what you are looking for?
Kenmore Elite 45986 Front Load Washer Logo

2,816 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenmore Washing Machines Experts

Sal De

Level 3 Expert

2679 Answers

fordexpert

Level 3 Expert

5636 Answers

Robert Rankin

Level 2 Expert

356 Answers

Are you a Kenmore Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...