Question about InFocus ScreenPlay 61" Rear Projection HDTV

3 Answers

I get 5 blinks on the panel and picture goes out....

I have the InFocus ScreenPlay 61md10 61 in. Rear Projection and once i turn it on after a minute or so, I get 5 blinks on the panel and picture goes out....sound remains. Is it the bulb or a voltage problem? How can i tell? I tried unpluging the tv and waiting for a while. I get the same result. When the picture is on, it seems vibrant. I mean there does seem to be any loss of brightness or clarity.

Posted by on

  • beola Nov 07, 2007

    Well, its the very same problem. At first I would get the 5 blinks on the panel screen and the picture goes out, but its been a while sicne I have turned the tv on but I know its the same problem still or sometimes, the picture wont come on at all. How can I fix this??

  • qfunes Aug 01, 2008

    Hi my name is Martin, I had the TV for about 2 years and I just had this happen. Turn the TV on and off got picture for about a minute and then image goes off again, I tried to reset the Lamp but nothing happens. I'm still having the problem. Where could I buy the replacement Lamp if needed. Thanks for the info in advance my email address is qfunes@yahoo.com

×

Ad

3 Answers

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

  • Contributor
  • 1 Answer

I'm getting the same 5 blinks and the bulb is brand new. Checked voltage at the bulb and I'm only getting .07 Volts!

Posted on Oct 06, 2013

Ad

I replaced the bulb

Posted on Oct 29, 2007

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

If you read the manual the 5 blinks indicates that the bulb needs to be replaced.

Posted on Nov 25, 2006

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have an InFocus Screenplay 61 in. DLP TV. For most of the time, it won't turn on except for the blue buttons on the TV itself. Sometimes, however, the TV would work for a couple of minutes completely...


The tv projection Lamp inside tv now like 1 1/2 or 2 years already?Tv on and in used every day 4 or 5 hours every day?Yes,this problems,the tv projection Lamp live are ending.Replacement of the tv projection Lamp,tv will work again.

Jun 07, 2011 | InFocus ScreenPlay 61" Rear Projection...

Tip

61md10 infocus daek picture


I just replaced my Bulb and bought it on E-Bay for $199.00 including shipping. Looks like a new one!!!!!! A new bulb WILL fix a dark picture on this unit.

on Jan 04, 2009 | InFocus ScreenPlay 61" Rear Projection...

1 Answer

61md10 61 in. Rear Projection HDTV by inFocus. Screen is black and menu buttons flash on and off a few times. No picture comes on. Any advice?


Could be as simple as a burned-out lamp, but flashing buttons on the panel mean that it's trying to tell you something's broken, so it might not be just the lamp.
You, sir (mam?), need a manual, or somebody who has one. I do, but it's at home. Perhaps if you responded with how many times the lights flash, I could look it up...

Jan 11, 2011 | InFocus ScreenPlay 61" Rear Projection...

1 Answer

Dlp 61md10 Has a black screen i have sound but no picture


The same thing just happened to me today. I finally disconnected the power cord from my 61md10 for a few minutes, then plugged it back in and turned it on. Not sure how this fixed it, but when I changed the input back to HDMI, the black screen was gone and I was getting a hi def picture again.

Jul 25, 2010 | InFocus ScreenPlay 61" Rear Projection...

1 Answer

Tv screen will freeze up after running and then go out while the lights blink on and off. I have replaced the bulb, but that did not take care of the problem


I have the same problem. It flashes ten times when booting up. Once it starts displaying a video image, it freezes after 10 seconds and then cycles off. It cycles on a minute or more later.

Nov 11, 2009 | InFocus ScreenPlay 61" Rear Projection...

1 Answer

I turned it on and got a very dark picture so I turned it off. Now I don't get any picture and it just keeps whining. What is the deal?


Seems like either the bulb or the color wheel may have problem. To check both the lamp and wheel requires opening the front panel. Let me know if you need more info......

CWR

Nov 04, 2009 | InFocus ScreenPlay 61" Rear Projection...

1 Answer

Infocus 61md10 ScreenPlay projects "BLUE PEOPLE"...HELP!


sounds like the color wheel isnt spinning at the right index speed, most likely due to bad bearings in the color wheel.

Jul 10, 2009 | InFocus ScreenPlay 61" Rear Projection...

2 Answers

No picture


Seems like the bulb needs replacing.....

May 28, 2009 | InFocus ScreenPlay 61" Rear Projection...

Not finding what you are looking for?
InFocus ScreenPlay 61" Rear Projection HDTV Logo

Related Topics:

320 people viewed this question

Ask a Question

Usually answered in minutes!

Top InFocus Televison & Video Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

rostit

Level 3 Expert

710 Answers

The Knight
The Knight

Level 3 Expert

75846 Answers

Are you an InFocus Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...