Question about West Bend 41053 Bread & Dough Maker

2 Answers

WEST BEND BREAD PAN LEAKS THROUGH PADDLE SHAFT SEALS

IS IT POSSIBLE TO REPLACE THE SEALS IN THE BOTTOM OF THE BREAD PAN?

Posted by on

  • Anonymous Dec 27, 2008

    My pan is several years old and it has been leaking, too. I can't find a replacement pan. West Bend doesn't make them anymore.

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 6 Answers

Replacement parts for all West Bend Bread Machines (and other products) are available online at Focus Electrics, which now handles the West Bend line of products.


If you do not know what model of machine you have, the model number can be found in the middle of the sticker on the back of your machine. The number will be somewhere in the range of 41026 to 41200 and it may be followed by one or letters.

West Bend Replacement products at Focus Electrics

(In 2003, The West Bend Company was acquired by Focus Products Group, LLC, an investment and growth oriented holding company headquartered in Vernon Hills, IL, and renamed West Bend Housewares.)

Posted on Jul 05, 2009

  • Tim Johnson Dec 11, 2013

    West Bend has redesigned their site and the replacement products page may now be found at:http://westbend.com/support/replacement-...

×

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Need a new bread pan can I get one dule paddle?

Posted on Dec 12, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Can't get knead bar on West Bend automatic bread maker


Was the bar ever installed on your bread maker? Is this a replacement knead bar (paddle)?

Jan 01, 2013 | West Bend Bread Maker Machine Knead Bar...

1 Answer

West Bend - America's Best Bread Maker 41035- replacement dough hooks


Are you missing the paddle that goes in the bottom of the pan?. If yes, I have one of those. Contact me through breadmachineshelp.com

Dec 27, 2012 | West Bend Breadmakers

1 Answer

I have a West Bend Bread Machine 41063 that I need the pan for, mine is leaking. Went to West Bend and they only have the paddle.


goto the amazon website type in the serch bar bread maker parts the y have some there , around £14.00 last week good luck..

Mar 31, 2011 | West Bend Breadmakers

1 Answer

The bread pan leaks. We need the clip and O ring for the shaft that goes through the bread pan and into the paddle.


In my opinion you would be better of just replacing with a new pan as you would pay about the same as trying to locate small parts for your used pan and it still might leak. If you want a link or supplier for your pan just send me the model # of your West Bend....
daryl441@msn.com

Nov 13, 2010 | West Bend Breadmakers

1 Answer

I have a brand new West Bend "just for dinner" bread maker. In the bottom, the two-pronged part which the motor is supposed to turn, doesn't turn. Thus, the kneading spatula doesn't turn. The heating unit...


Hi,
If the machine is brand new, then take it back for an exchange. If that's not possible, then call West Bend for a replacement. If that's not possible then let's try to solve this problem in a few steps. 1) Take pan out of machine and see if you can spin the paddle on the shaft. If yes...next step..if no then bearing in bread pan is stuck. 2) Put bread pan in machine and lock in place. Start a kneading cycle. Look through plastic lid to see if paddle turns. If no step 3. 3) Take pan out of machine and start kneading cycle. If motor shaft does not turn, then the belt fell off the pulley in the machine or belt is broken, or the motor is bad
Hank

Nov 15, 2009 | West Bend 41077 Just For Dinner¿...

1 Answer

The driveshaft falls out of the pan, even with paddle attached


Hi,
The shaft is pressed into a bearing that is molded and stamped in the bottom of the pan. This bearing is sealed and allows the shaft and paddle to spin freely. The rest of the parts on the other end of the shaft interact with the motor on your machine. They do wear out and can not be repaired because the worn parts are not available individually.

Sorry to say there are no repairable parts, so it's time for a new bread pan. I don't know the brand of your machine so you can google or check ebay.

Hank

Sep 02, 2009 | West Bend 41052 Bread & Dough Maker

1 Answer

Where can I get shaft seals for the bread pan on my West Bend 41098 bread machine?


Hi,
I do not believe they sell the seals. Here is a link to parts, customer support, and phone #'s
Hope this is useful
Kurt
http://www.focuselectrics.com/finditem.cfm?itemid=3230
Don't forget to rate our answer

Mar 19, 2009 | West Bend 41089 Bread & Dough Maker

Not finding what you are looking for?
Breadmakers Logo

1,063 people viewed this question

Ask a Question

Usually answered in minutes!

Top West Bend Breadmakers Experts

Irene Tulloch

Level 2 Expert

434 Answers

Bob S

Level 1 Expert

15 Answers

Jim Thurston

Level 3 Expert

669 Answers

Are you a West Bend Breadmaker Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...