Question about Lexmark Printers & Copiers

1 Answer

I'm trying to iinstall my new x4850 printer. In the step that requires you to find your language I pressed the button on the wrong language. How do I get back to setting the language to ENGLISH?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 35 Answers

Cancel the installation program and start over.

Posted on Nov 09, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My printer was purchased and is used in Germany. The on-screen instructions/options (eg, back to back print,etc) come up in German. Can I change that to english?.


Please follow the steps below to reset the Language on your Lexmark X3350 printer:
  1. Power off the printer.
  2. Hold down the power and + buttons simultaneously for five seconds. This will clear the language setting.
  3. The first prompt you will see is English. If this is not the language required, toggle the + and - buttons to navigate to your preferred language.
  4. Press the arrow button to select that language. The printer will save the new language setting.
Source: Wrong Language on the LCD Display of the Lexmark X3350

Sep 12, 2011 | Lexmark X3350 All-In-One InkJet Printer

2 Answers

I can not set English on my 5400 it is stuck on German. How can I change the language to English?


Changing the Display Language
To change the display language, please execute the following steps:
Step Action 1 From the control panel, press Copy Mode. 2 Press pattlnk_10122006_1256-menu.jpg. 3 Press pattlnk_10122006_148-arrow_left.jpg or pattlnk_10122006_148-arrow_right.jpg repeatedly until Tools appears. Then press the pattlnk_10122006_148-okay2.jpg button.
4 Press pattlnk_10122006_148-arrow_left.jpg or pattlnk_10122006_148-arrow_right.jpg repeatedly until Device Setup appears. Then press pattlnk_10122006_148-okay2.jpg. 5 Press pattlnk_10122006_148-arrow_left.jpg or pattlnk_10122006_148-arrow_right.jpg repeatedly until Language appears. Then press the pattlnk_10122006_148-okay2.jpg button. 6 Press pattlnk_10122006_148-arrow_left.jpg or pattlnk_10122006_148-arrow_right.jpg repeatedly until the language required appears on the display. 7 Press pattlnk_10122006_148-okay2.jpg to save the change.

Jun 07, 2011 | Lexmark X5470 All-In-One InkJet Printer

1 Answer

I put new cartridges in my photosmart c7280 printer and keep getting a Wrong Cartridges message. No matter what I try (putting in previous working cartridges, cleaning points) nothing changes. HELP !


Try these 2 procedures:

1/
- Unplug the printer without turning it off.
- Press On for 1O seconds.
- Release the button and replug the printer.

2/

(Careful, this will erase the printer's memory, like printing queues etc.)
- Unplug the printer.
- Press simultaneously "#" and "6" and keep these buttons pressed.
- Replug the printer without releasing these buttons.
- The display will say " Stop " or something like this, then "semi full reset" . Release the buttons now.
- Start the printer now. It will ask you to set the language and the country. If it doesn't, repeat all steps.

Jun 22, 2010 | HP Photosmart C5180 All-In-One InkJet...

1 Answer

Changed ink, cleaned cartridge area, turned printer on and off, still have an error code 1203. what is my next step?


Hi there can only try and I hope it will do the job for you.

Error 1203 is an issue that occurs either when a cartridge is bad or the printer cartridge Slot is bad...

1 - try cleaning the copper contacts of the both carts and cart slot in the printer and try again..
or
2 - when error shows up, shut the printers power off; wait one minute and turn it back on press copy.


Or try
Reset Factory Defaults on the Dell™ 962 Printer
To reset factory defaults on the printer, perform the following steps:
  1. Press the Mode button several times until the Copy LED is lit.

  2. Press the Menu button until Set Defaults is displayed, then press the Select button.

  3. Press the right arrow button until Restore Factory Defaults is displayed, then press the Select button. The printer will ask for the date, time and language.

  4. Enter the time, date and language, the press the Select button.

Reset Factory Defaults on the Dell™ 962 Printer
To reset factory defaults on the printer, perform the following steps:
  1. Press the Mode button several times until the Copy LED is lit.

  2. Press the Menu button until Set Defaults is displayed, then press the Select button.

  3. Press the right arrow button until Restore Factory Defaults is displayed, then press the Select button. The printer will ask for the date, time and language.

  4. Enter the time, date and language, the press the Select button.


Reset Factory Defaults on the Dell™ 962 Printer
To reset factory defaults on the printer, perform the following steps:
  1. Press the Mode button several times until the Copy LED is lit.

  2. Press the Menu button until Set Defaults is displayed, then press the Select button.

  3. Press the right arrow button until Restore Factory Defaults is displayed, then press the Select button. The printer will ask for the date, time and language.

  4. Enter the time, date and language, the press the Select button.


Reset Factory Defaults on the Dell™ 962 Printer
To reset factory defaults on the printer, perform the following steps:
  1. Press the Mode button several times until the Copy LED is lit.
  2. Press the Menu button until Set Defaults is displayed, then press the Select button.
  3. Press the right arrow button until Restore Factory Defaults is displayed, then press the Select button. The printer will ask for the date, time and language.
Enter the time, date and language, the press the Select button.

Please come back and just gave a vote, it will gave me some satisfaction to know am helping some one so I will keep on helping.

All The Best: Pineworks

Feb 15, 2010 | Dell 962 Photo All-In-One InkJet Printer

2 Answers

How can i change the language.


To change the language on the display back to the required language, follow these steps:
Step Action 1 Power the printer off and back on. 2 Press the pattlnk_10312007_1543-pattlnk_9242007_1455-settingsbutton.gif button once. 3 Press the right arrow button (pattlnk_1012007_1117-rightarrow.gif) twice. 4 Press the pattlnk_1012007_1045-selectbutton.gif button twice. 5 Press the left arrow button (pattlnk_1012007_1117-leftarrow.gif) or right arrow button (pattlnk_1012007_1117-rightarrow.gif) until you see the desired language. 6 Press pattlnk_1012007_1045-selectbutton.gif once. 7 Press pattlnk_1012007_1117-leftarrow.gif or pattlnk_1012007_1117-rightarrow.gif once. 8 Press pattlnk_1012007_1045-selectbutton.gif once.
I am going to post this but it may not come out like it is on the website.

If it is not legible, I will direct you to the support site to obtain it.

Wayne

Aug 21, 2009 | Lexmark X5070 InkJet Printer

1 Answer

Aaa


Here ya go:
What you will see
The printer display is not in the required language.
What to do
To change the language on the display back to the required language, do the following:
Steps Action 1 Power the printer off and back on. 2 Press the down arrow button () four times. 3 Press the button once. 4 Press once. 5 Press once. 6 Press once. 7 Press the left arrow button () or right arrow button () until you see the desired language. 8 Press the return button (). 9 Press once to save the new setting

Jun 19, 2009 | Canon NP 6035 Copier

1 Answer

Laserjet 3600 HP printer in wrong language in display led screen


When you say writing, I assume you mean the language on the printer's display. Here's a step by step guide (since I assume you can't read the Japanese).

Press the blue Checkmark button to access the menu system. Press the down area twice which will give you access to the configuration menu. Press the Checkmark button to select this menu. Press the down arrow twice to access the system setup menu. Press the Checkmark button to select this menu. Press the down arrow 13 times (you can just keep pressing it until it gets to the bottom. It won't go any farther than the last entry) to get to the very last entry which is language.Press the Checkmark button to select this menu. The languages will be displayed in their native scripts. The first one is English. Press the Checkmark button to select English. And you are done. Press the U shaped arrow to get back to the main menu.


Sep 20, 2008 | HP LaserJet 3600dn Printer

1 Answer

I accidently changed the language now its in dutch i think


Hi,

Troubleshooting steps to be Followed

Setting the front panel language on the HP PSC 2200 series To set the language and region, follow the steps below:
  1. On the all-in-one front panel, press the Setup button five times, and then press Enter to access the Maintenance settings.
  2. Press the number 5 on the front panel numeric keypad, and then press Enter to access the Language and Region settings.
  3. The available languages will appear in the display. Press the Right Arrow (>) button to scroll through the available languages. Enter the two-digit code for the desired language based on what is listed in the display (example - 11 for English, 12 for Spanish, and etc.).
  4. Confirm the selection by pressing the number 1 on the numeric keypad of the all-in-one. Press 2 to cancel the language and try again.
  5. The available regions will appear in the display. Press the Right Arrow (>) button to scroll through the available regions. Enter the two-digit code for the desired region based on what is listed in the display.
  6. Confirm the selection by pressing the number 1 on the numeric keypad of the all-in-one. Press 2 to cancel the region and try again.
The front panel language does not set correctly There can be a problem if the front panel cover (bezel) is not installed correctly. If the language cannot be set or is still wrong, do the following:
  1. If the software has not been installed, install it.
  2. Remove the control panel bezel. This may require the use of a coin or small screwdriver to carefully pry up the cover from the back (near the display).
  3. Reinstall the front panel bezel as shown in Figure 1. Be sure the bezel is firmly seated and that all of the buttons can move freely. Figure 1: Installing the front panel bezel c00224430.jpg
  4. Set the front panel language following the steps above.

Sep 18, 2008 | HP PSC 2210 All-In-One InkJet Printer

2 Answers

Lexmark X4850 paper jam


  1. Turn the printer off and open the access cover.
  2. Look for any obstructions in the paper path and remove them if necessary. (It is possible to move the carrier assembly with the power off.)
  3. Turn the printer on, load some paper, and press the Form Feed button. (On the X83, press the Select button.)
  4. Watch the paper as it feeds through and try to determine where the jam is occurring.
  5. Check to see if all the rollers are turning.

    If all the rollers are turning, there may be something in the feed path that you can't see. Go to step 6.
    If not, there is probably a feed motor or a gear problem and the printer may require service.
  6. If the paper is jamming under the carrier assembly, you may be able to fix it using the manual feed slot.
  7. Turn the printer off.
  8. Take a #10 envelope and feed it through the left side of the manual feed slot until it comes right through the printer to the back of the exit rollers.
  9. Move it up and down first, and then slowly move it over to the right side. If something is stuck under the black guide plate, this may work it loose.

May 09, 2008 | Lexmark X5470 All-In-One InkJet Printer

1 Answer

Change language


Here ya go:

What you will see
The printer display is not in the required language.
What to do
To change the language on the display back to the required language, do the following:

Steps Action 1 Power the printer off and back on. 2 Press the down arrow button (pattlnk_1012007_1117-downarrow.gif) four times. 3 Press the pattlnk_1012007_1045-selectbutton.gif button once. 4 Press pattlnk_1012007_1118-downarrow.gif once. 5 Press pattlnk_1012007_1045-selectbutton.gif once. 6 Press pattlnk_1012007_1118-downarrow.gif once. 7 Press the left arrow button (pattlnk_1012007_1117-leftarrow.gif) or right arrow button (pattlnk_1012007_1117-rightarrow.gif) until you see the desired language. 8 Press the return button (pattlnk_1012007_1121-returnbutton.gif). 9 Press pattlnk_1012007_1045-selectbutton.gif once to save the new setting.

Jan 08, 2008 | Printers & Copiers

Not finding what you are looking for?
Printers & Copiers Logo

Related Topics:

45 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lexmark Printers & Copiers Experts

Roopesh S
Roopesh S

Level 2 Expert

228 Answers

Sanath Kumar V

Level 3 Expert

684 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18298 Answers

Are you a Lexmark Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...