Question about Audio Players & Recorders

1 Answer

Hi I own a Technics Hi-Fi system (Model SC-EH780) and would like to attach a subwoofer to it. I cannot find the subwoofer unit that is supposed to go with this system. Can you help?

Posted by on

  • Mightymouse8 Nov 12, 2008

    Thanks very much for the speedy and precise response - you have exactly supplied the information I needed to know.



    Once again many thanks for your assistance - this is the first time I have used FixYa but will not hesitate to do so again in the future!!



    Kind Regards

    Mark

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 624 Answers

Any powered sub-woofer will work with it. Check the back of the Technics, make sure there is an RCA output labeled "Sub-woofer" or "Woofer" or "Sub". If so, you can get any brand of powered sub woofer and it will work. A powered sub-woofer is one with an amplifier for the sub built into the box and you will need to plug it into an A/C outlet as well. The only exceptions to what will work with this unit is to make sure you are not buying a sub-woofer that is made to only work with the companion unit it is originally sold with. Many Panasonic and JVC sub woofers are like this. Just look for a sub-woofer that is not part of any system. Velodyne makes some really great sub-woofers that would work nice with yours, but they can be a little expensive, but they are very good.

If your Technics has no RCA output for the sub-woofer, you will need to make sure that whatever powered sub-woofer you buy has a speaker level input for it. Most powered sub-woofers have this feature, so that you may just run the front speaker outputs of the receiver into the subwoofer and then the sub-woofer will have a set of speaker outputs right below the speaker inputs so you can still have your front speakers connected to that and not loose anything from your system.

I hope I have explained this in a manner you will understand easy, if not just post whatever questions you may have right on this thread and I will get back to you as soon as possible.

It would also be appreciated if you could rate this solution if you no longer need any help from me. If you do require more help, please wait to rate this until we are finished. That way I do not get an undeserved bad rating when we have not even finished our communications.
By the way, A "Thanks for trying" and "Helpful" rating are really not good, they always end up lowering my overall score.

Dave

Posted on Nov 09, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My technics sh-eh780 stereo seems to work but the sound is very dull in sound


Unless there's an issue with internal components of the amplifier or speakers, a common cause of this is reversed speaker polarity.

The wires between the + and - terminals of the speakers MUST connect to the same + and - terminals on the back of the stereo amplifier. The speaker wires that came with the stereo are color coded to help prevent mis-wiring. If you did not pay attention to this or used different wires for any reason, you need to ensure that the wires between the each of the speaker's 4 terminals connect to the correct group and + / - terminals on the amp.

65768d0b-a92d-4954-8028-cef9aeff6fba.jpg

See page 6 of the manual here: https://support.panasonic.co.nz/docstore/SC-EH780%20Operating%20Instructions.pdf

Make sure that the surround and center speakers are connected correctly, too.

Good luck!

Apr 06, 2014 | Technics SC-EH780 CD Shelf System

2 Answers

I have just bought a technics sc-dv290 hi-fi off of my cousin and found out the mid range and the tweeters have blown does anyone know where i could get replacent tweeters and mid-range speakers for it if...


As you probably know, these are the individual model numbers:

SC-DV290 the base unit
SB-DV290 speaker set

Front SB-DV290
Center SB-PC95
Surround SB-PS95

I'd scour Google or eBay for any or all of those models. Orphan speakers appear periodically.


Feb 10, 2011 | Technics SC-DV290 System

1 Answer

How can i put my tv threw my stereo i have yellow white and red in the back of tv and in the back of the stereo i have 2 white 2 red and 2 black pls can you help me


Since we're most concerned with the stereo sound, disregard colors and read the silkscreened legends for the connectors.

However you would be better to get your TV-related audio from the cable box in the same way. TV electronics is on the lo-fi end of the quality spectrum. And its own volume control may affect the output. If the TV has a setting to make the output FIXED, select it so you can turn the TV volume down and let the real speakers do the audio job.

Whichever you choose...

Connect Audio L and R Out from the TV to any convenient input (AUX?) on the Technics.

Apr 10, 2010 | Technics SC-EH780 CD Shelf System

1 Answer

How can i connect my ipod to my technics EH780


Go to Radio Shack and get a stereo headphone output to RCA cable adapter. Jack it into the AUX input.

Dec 26, 2009 | Technics SC-EH780 CD Shelf System

1 Answer

Technics hi fi


The audio amplifier IC damaged

May 09, 2009 | Technics SC-DV290 System

1 Answer

Technics sa dv280 hard reset


DESOLDER THE REGULATOR AND CHECK IT OUT AGAIN IF IT'S OK THEN REPLACE THAT BIG GREY AMP PART STICK TO THE RADIAROR ON THE BACK

Nov 16, 2008 | Technics SC-EH780 CD Shelf System

3 Answers

Pdf Download for Technics SH-DV 290 Hi Fi Instructions Manual


The number of the system is actually SC-DV290 the number you gave is actually the reg number of one of the component parts. To download the full user manual, go here ........ http://www.panasonic.co.uk/html/en_GB/Support/Downloads/220239/index.html#anker_220239 .... In the box " Enter model number, if known", enter SC-DV290 and press "search". Agree to the terms and view / download the manual. Hope this helps.

Sep 13, 2008 | Technics SC-DV290 System

1 Answer

Sc-eh780


measure with your vom meter at spker terminal dc voltge.You have to be fast .If you get any dc voltage at out put change amplifier ic.The voltage may appeare very little before unit goes off therefore you have to be fast ih measuring

Dec 01, 2007 | Technics SC-EH780 CD Shelf System

2 Answers

TECHNICS SC-EH750-CD KEEPS SKIPPING


replace travers assy ,because spindle motor is faulty. If you can get spindle only it will be chiper solution for you.

Nov 10, 2007 | Technics SC-EH780 CD Shelf System

Not finding what you are looking for?
Audio Players & Recorders Logo

Related Topics:

234 people viewed this question

Ask a Question

Usually answered in minutes!

Top Audio Players & Recorders Experts

kakima

Level 3 Expert

100304 Answers

 Grubhead
Grubhead

Level 3 Expert

4706 Answers

The Knight
The Knight

Level 3 Expert

71084 Answers

Are you an Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...